What is the real fuel consumption of the 2.8L Audi A6L?

2 Answers
OSadie
07/24/25 2:44am
The real fuel consumption of the 2011 Audi A6L 2.8FSI quattro luxury model is 10.5L/100km. The eight models including the 2009 2.8FSI quattro luxury model, luxury model, comfort entertainment model, 2010 2.8FSI quattro luxury model, luxury model, comfort model, 2011 2.8FSI luxury model, and comfort model all have a real fuel consumption of 9.3L/100km. The 2008 2.8FSI premium model and comfort entertainment model have a real fuel consumption of 7.4L/100km. The Audi A6L is a mid-to-large-sized car launched by Audi, with a 2.8L displacement and a total of eleven models. All eleven models have a fuel tank capacity of 80L. Therefore, models with a real fuel consumption of 10.5L/100km can travel 80/10.5*100=762km on a full tank, the eight models with a real fuel consumption of 9.3L/100km can travel 80/9.3*100=860km, and the two models with a real fuel consumption of 7.4L/100km can travel 80/7.4*100=1080km on a full tank. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the use of higher RPMs to warm up the car, which also increases fuel consumption.
Was this review help?
12
4
Share
MacElla
08/10/25 10:21pm
I drove a 2010 Audi A6L 2.8 for several years and remember being curious about its fuel consumption when I first bought it. In the city with frequent red lights or traffic jams, the fuel consumption was quite high, reaching 11 to 12 liters per 100 kilometers. On the highway at a steady speed, it was much more economical, around 7 to 8 liters. On average, it was just over 10 liters combined. Driving habits have a significant impact—I tried accelerating gently and braking less abruptly, and the fuel consumption dropped to around 9 liters. Regular maintenance is also crucial; after changing the engine oil and air filter, the engine ran smoother, and fuel consumption decreased slightly. I used 95-octane fuel, spending quite a bit on gas each month, but the car drove steadily and comfortably, so I wasn’t too worried about fuel costs on long trips. If you’re considering buying a similar model, I recommend finding one in good condition to avoid skyrocketing fuel consumption in older cars.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What Causes Shaking When Starting in First Gear?

Reasons for shaking when starting in first gear: It is caused by excessive wear of the clutch pressure plate. Manual transmissions primarily transmit power through the clutch, and the clutch pressure plate is mainly responsible for transferring kinetic energy. The clutch pressure plate has a limited lifespan. Prolonged semi-engagement, the engine operating under excessive load for extended periods, and other conditions can accelerate the wear of the pressure plate. When the clutch pressure plate wears to a certain extent, the power engagement will not be as smooth, causing the car to shake and the engine speed to become unstable. The solution to shaking when starting in first gear is to visit a repair shop or 4S store and have the maintenance technicians replace the clutch pressure plate.
11
0
Share

What are the hazards of running the air conditioning while parked?

Running the air conditioning while parked can cause the battery to be overloaded. Over time, this can easily lead to battery depletion or even failure to start the engine, and can also cause damage to the battery. If the air conditioning is turned on while the engine is idling, it is recommended not to leave the car in idle for too long, as idling can cause incomplete fuel combustion, leading to carbon deposits in the cylinders and on the throttle valve. The car air conditioning system is designed to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state, providing a comfortable environment for passengers, reducing travel fatigue, creating good working conditions for the driver, and playing an important role in ensuring safe driving as a ventilation device.
5
5
Share

How Long Does It Take for the Transfer to Appear on Traffic Management 12123?

It only takes a few days for the transfer to appear on Traffic Management 12123. Below is an introduction to how to check the vehicle transfer records: Local Vehicle Management Office Inquiry: You can personally visit the local vehicle management office with your ID card and a copy of it, along with the proof and documentation of the vehicle ownership transfer to inquire. If the vehicle is under customs supervision, you need to submit the Certificate of Release from Customs Supervision of the People's Republic of China, or a customs-approved transfer certificate. Vehicle Registration Certificate: You can check your vehicle registration certificate, which contains the records of any changes to the vehicle.
16
2
Share

Is It Useful to Add Sealing Strips to a Car?

Automobile sealing strips are useful as they serve to fill various gaps and spaces between the components of the vehicle body. Installation method for automobile sealing strips: Before installing the sealing strips, first wash the car clean and wipe the area where the strips will be applied with a cloth. Then, peel off the adhesive backing from the sealing strip, align it along the area to be sealed, press firmly to adhere, and trim any excess after installation. Function of automobile sealing strips: Automobile sealing strips are an essential tool inside the car, generally serving to fill various gaps and spaces between the vehicle's components. They provide functions such as shock absorption, waterproofing, dustproofing, sound insulation, and decoration, enhancing the comfort of the driving experience and protecting the car body.
20
2
Share

What to Do If a Sedan Frequently Scrapes Its Undercarriage?

Solutions for frequent undercarriage scraping in sedans: 1. Observe road conditions and the movements of vehicles ahead, maintain sufficient distance to ensure enough space to avoid potholes after the front vehicle passes over them or swerves. If there's no time to react, try to slow down as much as possible to minimize damage to tires and suspension. 2. Approach inclines diagonally, allowing one front wheel to contact the base or crest of the slope first. 3. Stay vigilant while driving, spotting obstacles early to slow down and steer around them—never risk driving over them. 4. Install an engine guard to protect against impacts from road debris and scrapes from foreign objects. 5. Apply an undercoating to the vehicle's chassis for comprehensive protection.
6
0
Share

Why does the electric car screen display a motor fault?

It is necessary to check whether the motor has any accidents and whether the motor insulation is normal. Here are the basic principles of pure electric vehicles: 1. Working principle of electric vehicles: battery—current—power regulator—motor—power transmission system—driving the car. 2. Technical principle: Pure electric vehicles use motors instead of fuel engines, which is equivalent to an automatic transmission. Traditional internal combustion engines can limit the speed at which they efficiently generate torque to a narrow range, which is why traditional internal combustion engine vehicles require large and complex transmission mechanisms; during the driving process of pure electric vehicles, there is no need for gear shifting devices, making operation convenient and easy. Compared with hybrid vehicles, pure electric vehicles use a single electric energy source, and the electronic control system greatly reduces the internal mechanical transmission system of the car, also reducing energy loss and noise caused by friction of mechanical components, saving internal space and weight of the car.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.