What is the real fuel consumption of the 10th-generation Accord 260?

How Far Back Can a Dash Cam Review Recordings?

Dash Cam Review Recordings_58 Auto The duration of recordings a dash cam can review depends on the storage card capacity and recording format. Below are details about dash cams and their operational duration: Introduction to Dash Cams: Utilizing the vehicle's engine for operation, dash cams record the external surroundings using high-definition cameras. Operational Duration of Dash Cams: Typically, a 32GB storage card can continuously record for about 8 hours in HD mode. Dash cam SD cards usually come in capacities ranging from 2GB, 4GB, 8GB, 16GB, to 32GB. For larger video storage needs, mobile digital hard drives with capacities of 250GB, 500GB, or even 1000GB can be used. However, most dash cams operate on a loop recording system, where the oldest recordings are automatically deleted once the storage is full to continue recording. Therefore, there is no fixed number of days for how far back a dash cam can review recordings. For example, if within an 8GB memory, the dash cam contains recordings from 10 days ago, then those can be reviewed. But if daily recordings are extensive, footage from 10 days prior might be overwritten.

11

3

Share

Can a Car with Start-Stop Function Use a Regular Battery?

Cars equipped with start-stop functionality cannot use regular batteries, as doing so poses several risks, including shortened battery lifespan, rapid capacity degradation, inability to properly utilize the start-stop feature, and potential health impacts on passengers. Below is relevant information about the start-stop function: The original purpose of engine start-stop technology is energy conservation and emission reduction: This system is designed to automatically put the engine into a dormant state during brief stops to achieve energy-saving and emission-reducing goals. When the vehicle comes to a halt due to traffic congestion, the driver presses the brake pedal and shifts into neutral. The system then detects that the engine is idling without being engaged in gear, while wheel speed sensors indicate zero movement. Additionally, electronic sensors confirm sufficient energy reserves for the next startup. If all three conditions are met, the engine will automatically shut off. To restart, simply release the brake pedal and either press the accelerator or turn the steering wheel. Advantages of the automotive start-stop function: The principle of the automatic start-stop system involves adding an electric motor to a conventional gasoline engine. When the vehicle is stationary with the engine idling, the system completely shuts off the engine. Upon needing to restart, the electric motor quickly reignites the engine through driver actions such as pressing the accelerator, engaging the clutch, or turning the steering wheel, thereby reducing fuel consumption during idle periods.

7

0

Share

What Are the Gears in an Automatic Car?

Generally, the gears on an automatic car are: P (Park), R (Reverse), N (Neutral), D (Drive). Below is a detailed introduction to each gear: P Gear: When the vehicle needs to be parked for a long time, especially on a slope, it should be shifted into P gear. At this time, the wheels are mechanically locked, ensuring the vehicle cannot move while stationary. It's important to note that the vehicle should be turned off before shifting into P gear, and then the key should be removed. R Gear: When shifting into reverse gear, some vehicles require pressing the safety button on the gear shift to move the gear lever to R. It's crucial to remember that the R gear cannot be engaged while the car is moving; the vehicle must be completely stopped before shifting into reverse. N Gear: The N gear can be used when the vehicle is just started or being towed, as well as when waiting at signals, in traffic jams, or during brief stops. When shifting into N gear, the handbrake should be engaged. On a slope, to prevent rolling, the brake should also be pressed. However, coasting in N gear downhill is prohibited, as it not only doesn't save fuel but can also damage the transmission. The neutral gear in an automatic transmission is very different from that in a manual transmission. D Gear: When preparing to start driving, after pressing the brake, shift the gear lever into D gear, then release the handbrake, slowly press the accelerator, gently release the brake, and continue to press the accelerator.

9

3

Share

How Many Kilometers Should Platinum Spark Plugs Be Replaced?

Platinum spark plugs should be replaced at 40,000 kilometers, while ordinary nickel alloy spark plugs need replacement at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Damaged spark plugs may exhibit the following symptoms: difficulty starting, reduced power, excessive exhaust emissions, and increased fuel consumption. If these symptoms occur, the spark plugs should be replaced promptly. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires in the firing order and secure the cover.

1

2

Share

What is the correct ignition method for a key-start car?

Driver enters the car, adjusts the seat, checks the rearview mirror, fastens the seat belt, inserts the car key, turns the key to the ON position, and pauses to wait; The vehicle's self-inspection program is initiated by the onboard computer, and many icons on the dashboard will light up. The self-inspection is the vehicle's self-diagnostic function, mainly for reading internal faults of the vehicle. Wait until the flashing icons go out before turning to the START position to ignite. The self-inspection time by the onboard computer is generally 6-10 seconds.

17

4

Share

What does the green indicator on the Volkswagen Magotan dashboard mean?

The green indicator displayed on the dashboard of a Volkswagen Magotan indicates that the front fog lights are on or the cruise control is activated. Relevant information about the car dashboard is as follows: Introduction to the car dashboard: With the advancement of electronic technology and the emergence of new sensors and electronic display components, automotive electronic dashboards have been rapidly adopted. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Function of the car dashboard: The car dashboard serves as a device that reflects the working conditions of various vehicle systems. It continuously monitors the car's status, provides the driver with necessary operational parameter information, and serves as an important interface for communication between the driver and the vehicle.

14

5

Share

What is the real fuel consumption of the 10th-generation Accord 260?

How Far Back Can a Dash Cam Review Recordings?

Can a Car with Start-Stop Function Use a Regular Battery?

What Are the Gears in an Automatic Car?

How Many Kilometers Should Platinum Spark Plugs Be Replaced?

What is the correct ignition method for a key-start car?

What does the green indicator on the Volkswagen Magotan dashboard mean?

What are the pros and cons of the PDK transmission?

What is the Normal Range for Oil Pressure Gauge?

How Many Liters of Transmission Fluid Are Needed for a Single Replacement?

How to reset BMW after power failure?