What is the range of the XPeng P7 2021 480 model?

What are the steps for starting a manual transmission car?

The steps for starting a manual transmission car are: 1. Press the clutch, followed by the brake; 2. Shift into first gear with your right hand; 3. Release the brake; 4. Slowly release the clutch while gently pressing the accelerator. For starting on a slope with a manual transmission: 1. Pull the handbrake tightly in advance and press the brake; 2. Slowly release the clutch until you feel the car body shaking noticeably at about halfway; 3. Release the handbrake and the brake, and the car will slowly climb up. Notes for starting a manual transmission car: 1. Always press the brake before shifting gears; 2. As long as the clutch is pressed, the car will not stall. If you feel it is about to stall, immediately press the clutch to avoid stalling; 3. Sudden jerking forward is mostly due to incorrect clutch release; 4. When starting on a slope, begin releasing the clutch with your left foot, and as your right foot releases the brake, immediately press the accelerator.

18

4

Share

How Long Can Tires Be Used?

Tires have a lifespan of about 3 to 5 years. Here is relevant information about tire service life: 1. After 3 to 5 years, regardless of mileage or whether the safety line has been reached, tires should be replaced immediately. 2. Under normal road conditions, tires typically last 50,000 to 60,000 kilometers, and it is recommended to rotate them every 8,000 to 10,000 kilometers. 3. For passenger car tires, the recommended air pressure is generally 2.3 for front tires and 2.5 for rear tires. When the wear indicator (1.6 mm tread depth) on the tire sidewall's triangular mark becomes visible, the tire should be replaced immediately. Conditions requiring tire replacement: 1. Tires must be discontinued when worn to the wear limit indicator (i.e., tread depth below 1.6 mm). 2. Aged tires. 3. Tires with deformed treads or damaged beads, tires with sidewall damage caused by driving underinflated, and tires corroded by chemicals should not be used further. 4. Bulging tires must not be used. 5. Any other damage that affects tire safety also prohibits continued use.

14

0

Share

Is XPeng's Battery Lifetime Warranty Free Replacement?

XPeng Motors has launched a lifetime warranty service for power batteries and an extended warranty service for the entire vehicle (excluding the three-electric system and wearable parts). This means that the first owners of XPeng G3 and P7 non-commercial vehicles can enjoy the lifetime quality warranty service for power batteries provided by XPeng Motors. Relevant details are as follows: 1. Mileage: Most consumers only drive about 10,000 kilometers per year on average, and pure electric vehicles like the XPeng G3 are mostly used for daily commuting, rarely for road trips. Additionally, XPeng Motors stipulates that the vehicles cannot be used for commercial purposes, so exceeding 150,000 or 160,000 kilometers is highly unlikely. 2. Power: The XPeng P5 will be equipped with a drive motor with a maximum power of 155kW. For the battery pack, it offers ternary material lithium-ion batteries and lithium iron phosphate power batteries produced by CATL. The NEDC maximum range corresponding to the 66.2kWh and 71.4kWh capacities is 550km and 600km, respectively, while the 55.9kWh battery pack provides 460km.

8

2

Share

Do I need to wait for the left turn signal when making a U-turn?

If there is a U-turn indicator light and it is red, you must wait to make a U-turn; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this violation carries a penalty of 6 demerit points and a fine of 200 yuan. If there is no U-turn indicator light, and the gap is marked with a dashed line, the U-turn is not affected by the traffic signal and does not require crossing the crosswalk. If the gap is marked with a solid line, the U-turn must cross the crosswalk and is subject to the left turn signal. Making a U-turn directly may result in being photographed or penalized by on-site traffic police. If you need to cross the crosswalk to make a U-turn, you must yield to pedestrians: Pedestrians walking on the right side of the crosswalk without reaching the centerline of the road. Vehicles on the left side of the road must slow down and ensure safety before proceeding through the crosswalk. Pedestrians waiting outside the boundary between motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed through the crosswalk after ensuring safety. If pedestrians cross the boundary between motorized and non-motorized lanes, vehicles failing to stop are committing a violation and will be penalized. Once pedestrians enter the motorized lane via the crosswalk, vehicles must slow down and proceed only after ensuring safety. Failing to stop is a violation and will be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. Vehicles failing to stop are committing a violation and will be penalized. Pedestrians crossing the centerline and entering the motorized lane. Vehicles failing to stop are committing a violation and will be penalized. If the road is divided by a median with greenery, pedestrians waiting in the median area require vehicles to slow down and proceed through the crosswalk after ensuring safety. Scenarios where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn is permitted. If there is a U-turn signal light, follow its instructions. If no signal light exists, make the U-turn without obstructing other vehicles or pedestrians. Intersections without explicit "No U-turn" or "No Left Turn" signs: If there are no explicit prohibitions, U-turns are allowed. "No explicit prohibition" means the absence of "No U-turn" or "No Left Turn" signs and no solid centerline. Yellow grid lines also permit U-turns: Yellow grid lines indicate no-stopping zones at intersections prone to congestion or near important facilities. While stopping on these lines is prohibited (including waiting for traffic lights), U-turns are allowed unless a median barrier is present. Intersections with U-turn signal lights: If a U-turn signal light exists, follow its instructions—only proceed on green. When "No Left Turn" and "U-turn Allowed" signs coexist: U-turns are permitted, but left turns are not. Note that "No U-turn" does not equate to "No Left Turn." Precautions when making U-turns at intersections: Check road markings. If solid lines are present, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. If a "No Left Turn" sign is posted, U-turns are also prohibited at that intersection, even if "No U-turn" is not explicitly stated, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to oncoming traffic when making a U-turn. Proceed only if it does not interfere with straight-moving vehicles; otherwise, you bear full responsibility for any accidents. Near intersection stop lines, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow—some have straight arrows. Even without explicit "No U-turn" signs, U-turns are prohibited in such lanes.

13

4

Share

Is It Safe After Registering an Accident Vehicle with Fake Documents?

Registering an accident vehicle with fake documents is unsafe and illegal. Here is an introduction to accident vehicles: 1. Definition: An accident vehicle refers to a vehicle that has sustained damage from non-natural wear and tear, resulting in decreased mechanical performance and economic value. Generally, an "accident vehicle" refers to one with structural damage. 2. Visual Inspection: After checking the gloss and color difference, inspect the seams between various body parts. Focus on whether the seams are uniform and whether the edges are smoothly finished. Typically, "original factory parts" that have not undergone sheet metal repair will have even seams without noticeable inconsistencies in thickness.

8

3

Share

How to Fix Lexus Idle Stop Malfunction?

To resolve a Lexus idle stop malfunction, promptly visit a 4S shop for circuit repair. Below is relevant information about the idle start-stop system: 1. Introduction: The full English name of the idle start-stop system is Idle-Stop-Start-System. Its working principle is that when encountering a red light or traffic jam with vehicle speed below 3km/h, the engine will automatically shut off. When the driver presses the clutch, accelerator pedal, or releases the brake, the starter will quickly restart the engine. 2. Installation: This system is simple and convenient to install, requiring no modification to the car's original circuits. Simply locate the relevant sensor signal lines in the car's electrical system and connect them according to the circuit installation diagram in the manual for immediate use.

16

5

Share

What is the range of the XPeng P7 2021 480 model?

What are the steps for starting a manual transmission car?

How Long Can Tires Be Used?

Is XPeng's Battery Lifetime Warranty Free Replacement?

Do I need to wait for the left turn signal when making a U-turn?

Is It Safe After Registering an Accident Vehicle with Fake Documents?

How to Fix Lexus Idle Stop Malfunction?

How to Use the Paddle Shifters on Honda CR-V Hybrid?

How to enable Bluetooth in BAIC EC3 without a central control screen?

What kind of oil should be added to an Audi A4?

What is the reason for the failure of Honda XR-V's auto start-stop function?