What is the range of the Wuling Hongguang MINIEV?

How to Reset the Maintenance Light on a Buick GL8?

Buick GL8 maintenance light reset steps are: 1. With the engine off, turn the ignition switch to the "Ignition/Run/Start" mode. 2. Use the buttons on the right side of the steering wheel in the driver information center area to control the instrument panel display to show the "Oil Life" interface. When the remaining oil life is low, the display will show a "Change Engine Oil Soon" message. 3. Press the ">" button on the driver information center controller, the display will show "Reset", then press the "√" (OK/Confirm) button to reset the oil life to 100%. 4. Turn off the ignition switch to complete the reset.

8

5

Share

What type of engine oil is suitable for the Haval H6?

The 4S dealership for the Haval H6 uses SL-grade 10W-40 viscosity semi-synthetic engine oil, so any oil with the same specifications can be used. Below are relevant details for selecting engine oil: 1. Consider the vehicle type: For Japanese and American cars, the engines are more precise with smaller gaps between components, making 5W-30 oil more suitable. European cars often use turbocharging technology, resulting in larger gaps, so 5W-40 is relatively better. Typically, Japanese and Korean cars use 20 or 30 viscosity oils, such as SAE 0W-20, 0W-30, 5W-20, or 5W-30. American cars recommend 30 viscosity oils like SAE 5W-30, while European cars use 40 viscosity oils like 0W-40 or 5W-40. 2. Consider the vehicle age: Refer to the maintenance manual. Newer cars usually opt for lower viscosity oils like 5W-30. As the car ages, gradually switch to slightly higher viscosity oils, such as 5W-40, because older engines experience more wear and require higher viscosity oils. 3. Consider road conditions: Road conditions significantly affect oil lifespan. In areas with poor road conditions, the oil change interval should be shortened. In urban areas with frequent stop-and-go traffic, lower viscosity oils like SN 5W-30 are recommended. For long-distance driving, SN 5W-40 is more suitable.

18

4

Share

How to Reset the Maintenance Light on Lavida?

Here are the steps to reset the maintenance light on Lavida: 1. First, press and hold the small wrench button with your left hand, then turn the ignition switch to the "ON" position (the position before starting the engine) with your right hand. 2. Release the small wrench button with your left hand and press the minute adjustment button on the time setting. 3. Turn off the ignition switch and remove your left hand from the time button. 4. Turn the ignition switch back on or start the engine, and the maintenance reminder will disappear, completing the manual reset process. Below is some related information about the maintenance light: 1. The maintenance light is a device that reminds the owner to service the vehicle in a timely manner. 2. After servicing the vehicle, the owner can reset the maintenance light to allow the system to recalculate the next maintenance interval based on time or mileage.

8

0

Share

How to Broaden Your Vision When Reversing at Night

Methods to broaden your vision when reversing at night are as follows: 1. Install wide-angle auxiliary mirrors on car rearview mirrors: They help you expand your field of vision in time, giving you a complete view of obstacles around the vehicle body and fully mastering the situation behind the car, making nighttime reversing safer and easier. 2. Install small convex mirrors: High-definition frameless pure glass that can rotate 360 degrees significantly improves the rearview mirror's field of vision. When reversing, the view becomes much wider, making it as easy as daytime reversing. 3. Install a reversing camera: Ultra-bright and large reversing lights can illuminate a wide area behind the car, allowing you to see everything clearly in the image, making reversing more convenient.

8

2

Share

What kind of engine oil is suitable for the Teana?

You can choose semi-synthetic engine oil, but it is best to use fully synthetic engine oil, whether it is joint venture or domestic fully synthetic engine oil. The following are the precautions for selecting engine oil: 1. You must use engine oil with the appropriate quality grade, which is the key to ensuring the normal operation of the engine. 2. If the oil supply is not timely or there is no suitable oil, substitute oil can be used, but during use, you must strengthen observation, pay attention to the oil quality and whether the oil filter is blocked, and deal with any problems in time. 3. Choose oil with appropriate viscosity. Choose oil with suitable viscosity according to the local temperature. The idea that the higher the viscosity, the better is wrong, because if the viscosity is too high, the oil flow will be too slow when starting, which can easily aggravate the wear of parts and even cause bearing burning accidents. 4. When changing the oil, the waste oil must be completely drained. 5. The gas that enters the crankcase from the combustion chamber is corrosive, which can oxidize and deteriorate the engine oil and pollute the engine, so the crankcase must be well ventilated. 6. Maintain normal oil level height. 7. Regularly check and maintain the oil filter, and replace the filter element in time. 8. Any quality of engine oil will undergo some physicochemical changes after being used for a certain mileage, which will bring harm to the engine and cause failures. Therefore, the oil should be changed regularly according to the quality based on the changes in the engine oil.

4

2

Share

How to Clear the Maintenance Reminder for the 2018 Octavia?

The method to clear the maintenance reminder for the Octavia is as follows: turn off the ignition, hold down the SET button below the instrument panel, turn on the ignition, then release the SET button, and finally press the 0.0 button. The detailed steps to clear the maintenance reminder for the Octavia are as follows: 1. Turn off the ignition switch (engine off). 2. Press and hold the "0.0/SET" (reset/setting) button on the instrument panel. 3. Turn on the ignition switch while continuing to hold the "0.0/SET" (reset/setting) button with your left hand. 4. When one of the following messages appears on the instrument panel display, release the "0.0/SET" (reset/setting) button. 5. Press the "0.0/SET" (reset/setting) button again to confirm. 6. Check if the maintenance light has been reset; if not, start the process from the beginning.

17

5

Share

What is the range of the Wuling Hongguang MINIEV?

How to Reset the Maintenance Light on a Buick GL8?

What type of engine oil is suitable for the Haval H6?

How to Reset the Maintenance Light on Lavida?

How to Broaden Your Vision When Reversing at Night

What kind of engine oil is suitable for the Teana?

How to Clear the Maintenance Reminder for the 2018 Octavia?

What does EDC on the car dashboard mean?

How often should the Lavida tires be replaced?

What is the N gear?

Is Wheel Balancing Necessary After Installing New Tires?