What is the range of the Wuling Hongguang in kilometers?

How to Remove the Rear Seat of Changan Eado?

Changan Eado's rear seat removal method is as follows: 1. Lift the rear seat cushion forcefully; 2. You will see three screws, remove these three screws; 3. Lift the rear seat forcefully to complete the removal. Taking the 2020 Changan Eado as an example, it is a compact car with body dimensions of: length 4730mm, width 1820mm, height 1505mm. The 2020 Changan Eado features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 158PS, a maximum torque of 260Nm, and a maximum power of 116kW.

20

3

Share

What to Do When the Engine Fails to Start Due to Water Ingestion?

Solutions for a car that won't start after water ingestion: Remove the spark plugs, disconnect the fuel injector connectors, and replace the engine oil. It's important to note that you should never attempt to start the engine if water has entered, as this can easily damage the valves. Possible consequences of water ingestion in a car: 1. White smoke from the exhaust pipe: Water in the engine combustion chamber can lead to incomplete fuel combustion, and the water turns into steam due to high temperatures, eventually being expelled through the exhaust system, resulting in white smoke. 2. Engine stalling: If a large amount of water enters, it can cause the engine to stall directly, leading to severe and potentially fatal damage to the engine.

3

0

Share

What Causes Car Shaking During Hard Acceleration?

Car shaking during hard acceleration can be attributed to the following reasons: 1. Carbon buildup in the engine, primarily caused by incomplete combustion due to unabsorbed gasoline, leading to vehicle shaking and increased fuel consumption; 2. Worn timing gears from prolonged use without replacement, resulting in severe gear wear, loose meshing, abnormal noises, and jerking sensations; 3. Mismatch between engine oil quality and the engine's requirements. Excessively thick oil viscosity can lead to increased fuel consumption and carbon buildup. Additionally, uncleaned throttle bodies or fuel injectors over time, unspark plugs not replaced for extended periods, faulty intake manifolds, or engine misfires can all affect fuel atomization and combustion, contributing to shaking issues.

6

0

Share

Why was the Bestune B30 discontinued?

Bestune B30 had some quality issues, which led to a continuous decline in sales. As a result, the car's position in the automotive market and among consumers gradually weakened, ultimately leading to its discontinuation. Below is a detailed introduction about Bestune: 1. Introduction: The Bestune brand was established on May 18, 2006. On May 18, 2021, FAW Bestune launched a new brand strategy and comprehensively upgraded its logo, "Window of the World," to create a new Bestune brand identity. 2. Brand Philosophy and Positioning: The brand philosophy of the new Bestune is to continuously create surprises for users' travel. The brand positioning of the new Bestune is a mid-to-high-end brand in China's mainstream automotive market.

17

0

Share

Can You Still Drive When the Car Indicates an Oil Change?

When the car indicates an oil change, you can still drive, but the driving distance should not be too long. It is recommended to change the oil as soon as possible because the reminder indicates that the oil level is already insufficient. Insufficient oil can lead to cylinder scoring, poor lubrication, component wear, and even increased operational resistance. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve the shortcomings of the base oil, providing certain new properties.

4

5

Share

What is the ignition advance angle?

The normal range for the ignition advance angle is between 6° and 12°. Below is an introduction to the ignition advance angle: Definition of ignition advance angle: During engine operation, the timing of ignition significantly impacts engine performance. Ignition advance refers to the spark plug firing before the piston reaches the top dead center (TDC) of the compression stroke, igniting the combustible mixture in the combustion chamber. The angle through which the crankshaft rotates from the moment of ignition until the piston reaches TDC is called the ignition advance angle. Disadvantages of excessive ignition advance: Can cause knocking; obstructs piston upward movement; reduces efficiency; increases thermal load, mechanical load, noise, and vibration.

18

3

Share

What is the range of the Wuling Hongguang in kilometers?

How to Remove the Rear Seat of Changan Eado?

What to Do When the Engine Fails to Start Due to Water Ingestion?

What Causes Car Shaking During Hard Acceleration?

Why was the Bestune B30 discontinued?

Can You Still Drive When the Car Indicates an Oil Change?

What is the ignition advance angle?

What Components Make Up the Clutch Operating Mechanism?

What is the normal idle speed?

What is the structure of a car chassis?

Can I Add 95 Octane Gasoline When 92 Octane Gasoline Is Not Completely Used Up?