What is the range of the Volkswagen Lavida?

1 Answers
DeAlessandra
07/30/25 7:18am
The pure electric Lavida has a range of 278 kilometers. The range of the pure electric Lavida is very accurate, thanks to the CMCE high-precision battery energy control system, which can monitor the voltage of each battery pack. More relevant information is as follows: 1. Battery: This car uses a ternary lithium battery. The fast charging time for the Lavida pure electric is 0.66 hours, and the slow charging time is 5.5 hours. The maximum speed of the Lavida pure electric is 150 km/h. The range of a pure electric vehicle can be affected by many factors, such as driving conditions, wind direction, and whether the air conditioning is turned on. 2. Pure Electric Vehicle: Pure electric vehicles do not have an engine, so the air conditioning in these vehicles relies entirely on electricity. If the air conditioning is turned on during driving, this will affect the range of the pure electric vehicle. When decelerating, the car uses the regenerative energy recovery system to slow down, and the brakes are only used in emergency situations. Keeping the car's regenerative energy system maximized allows for the recovery of additional electrical energy during deceleration, which is stored in the car's battery.
Was this review help?
11
0
Share
More Forum Discussions

How Long Can Wheel Hub Paint Last?

Wheel hub paint generally lasts for more than half a year. However, the specific duration is highly related to the craftsmanship of the painter and the owner's car maintenance. When painting wheel hubs, some auxiliary tools can be used to speed up the drying process, such as using a heat lamp, which usually allows the job to be completed within the same day. Precautions for wheel hub painting: It is essential to wait until the paint surface is completely dry (approximately 24 hours) before exposing it to water. If the weather is unfavorable, it is advisable to delay for an additional day, as accidental water exposure can affect the paint's adhesion, leading to fading in a short time. Always choose a reputable car beauty shop for wheel hub painting, as smaller shops often use lower-quality paint with poor adhesion, and their craftsmanship may not be as refined, negatively affecting the painting results. Classification of wheel hub paint: Paint treatment involves spraying followed by electric baking, which is cost-effective, provides vibrant colors, and ensures long-lasting results. Even if the vehicle is scrapped, the color of the wheel hubs remains unchanged. Wheel hub paint is divided into two main categories: low-temperature paint, which cures at temperatures between 140°C and 180°C, and high-temperature paint, which cures at temperatures ranging from 280°C to 400°C. High-temperature paint is also known by its English abbreviations, such as Teflon, PTFE, or F4.
19
0
Share

Does the Automatic Transmission Subject Three Include Speed Change Operations?

Automatic transmission Subject Three does include speed change operations. Below is a detailed introduction to the Subject Three test: 1. Overview: Subject Three, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Test Content: The road driving skills test for Subject Three generally includes: preparation before driving, light simulation test, starting, driving straight, speed change operations, changing lanes, parking by the roadside, driving straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting other vehicles, etc.
1
4
Share

Does the left turn signal turn off automatically?

The left turn signal does not turn off automatically. Below is detailed information about car lights: 1. Headlights: The main purpose of headlights is to illuminate the road and objects ahead to ensure driving safety. High beams and low beams can be alternated as signals for overtaking at night. Headlights are installed on both sides of the front of the car, with 2 or 4 units per vehicle. The bulb power is 45-60W for high beams and 25-55W for low beams. 2. Fog lights: Fog lights are installed near the headlights or slightly lower. In conditions of low visibility such as fog, snow, heavy rain, or dust, fog lights serve to illuminate the road and provide signals for oncoming vehicles. The light is mostly yellow, as yellow light has a longer wavelength and better penetration through fog. The bulb power is typically 35W.
10
2
Share

Does Scrubbing the Tire Sidewall Against the Curb Have Any Impact?

Tire sidewall scrubbing against the curb does have an impact. Here are specific details regarding tire usage: 1. Avoid severe compression: The tire sidewall must not endure severe compression. The sidewall is the weakest part of the tire due to its thinness, despite having protective steel cords. If the tread wears out completely, it becomes highly dangerous and increases the risk of a blowout. 2. Do not arbitrarily change tire size: Tire dimensions should not be altered at will; it is essential to choose tires that match your vehicle. 3. Installing new tires: Always perform dynamic balancing. During driving, if the tire position is unbalanced, it can cause steering wheel vibration, which intensifies with speed. Unbalanced tires also lead to uneven wear.
10
2
Share

What does an exclamation mark in a vehicle mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the vehicle's general performance or components and functions. Main issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake system fault: An exclamation mark inside a circle with parentheses. This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal tire pressure: An exclamation mark with a horizontal line below parentheses. This represents the tire pressure monitoring warning light, which lights up when the vehicle's tire pressure is too low. Check the vehicle's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem. In addition, during daily use of the vehicle, the warning lights displayed on the vehicle dashboard are divided into two different colors, yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and call for professional assistance to prevent unpredictable dangers to the vehicle and personal safety from forced driving. It should be noted that when the car is started, all lights will turn on, and the system will perform an automatic check. After the check is completed, the lights will turn off automatically. If a light does not turn on when the ignition is switched on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for vehicle inspection to eliminate safety hazards.
8
0
Share

What Causes a Tire to Feel Bulged but Not Visible?

Here is a detailed introduction to the reasons why a tire may feel bulged but not visibly so: 1. Puncture or impact damage: Check if there is any puncture or impact damage on the tread or sidewall corresponding to the bulge. If found, have it repaired at a professional tire repair shop. The principle is that when a cord in the fabric breaks, under the pressure, it gradually pulls out from its original position, causing a sidewall bulge. This phenomenon will become visibly noticeable later, appearing as a radial bulge. 2. Joint of the tire body cords: If there is no damage at the corresponding location and the bulge can only be felt by hand, not visibly obvious when inflated, it is likely the joint of the tire body cords, which does not affect usage. 3. Delamination of components: If the bulge is circular, it should be claimed at the tire dealer or 4S store as it is a quality issue—delamination between rubber components or between rubber components and the tire body cords.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.