What is the range of the Senya R7 new energy vehicle?

How long should I wait for the second attempt at Subject 1?

A week to half a month later, you can make another appointment. 1. Make-up exam: Each subject is examined once, and if you fail, you can take a make-up exam once. If you do not take the make-up exam or still fail the make-up exam, the exam will be terminated, and the applicant should make a new appointment for the exam. 2. Subject 1: Refers to the driver's theory test, which is conducted at the vehicle management office and is a mandatory licensing exam for all driver's license applicants. The test content includes the most basic knowledge such as driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the driver's theory test is arranged by the local vehicle management offices.

6

3

Share

How to Deal with Stains Left on the Roof After Using Foam Cleaner?

Ensure that the cleaning agent used on the car body is specifically designed for car washing. If no cleaning agent is available, you can also wash the car body with detergent diluted in water. Shake the cleaning agent well before use, then spray it vertically on the water stain areas of the vehicle. After spraying, let it sit for a while to allow the cleaning agent to fully penetrate the water stains. Use a clean cloth to wipe the water stain areas of the car body back and forth.

18

2

Share

How to Use a Nissan Dash Cam?

Insert the TF card while the device is powered off, then briefly press the power button to turn it on. Scan the QR code provided in the manufacturer's manual to install the app on your phone. Before opening the app, establish a Wi-Fi connection between your phone and the dash cam. Once connected, a blue recording indicator light flashing once per second indicates that recording is in progress.

15

2

Share

How to Remove and Install a Wiper Motor?

Press the locking clip and disconnect the wiring harness connector simultaneously. Use a 23mm socket with a breaker bar to remove the two fixing nuts of the wiper arm assembly. Press the bolt of the wiper transmission bracket by hand to remove the wiper.

1

2

Share

How to Step on the Clutch and Brake When Starting?

First, step on the brake and clutch simultaneously and slowly. Pull up the handbrake and shift to neutral, then release the brake and clutch, and the vehicle will come to a stop. Slowly release the clutch while simultaneously and gradually releasing the brake, observing the changes in the vehicle's condition. When the clutch is released to the point where the vehicle starts to shake, keep the clutch foot steady and simultaneously release the handbrake with the right hand. Move the foot from the brake to the accelerator, gently press the accelerator, and slowly release the clutch to start the vehicle.

13

5

Share

Where is the wheel hub located on a car?

The wheel hub is located at the center of the wheel where the axle is installed, commonly referred to as the "rim" or "steel rim." Wheel hubs are prone to accumulating dirt, and if not cleaned for an extended period, they may corrode or deform, posing safety hazards. Therefore, special attention should be paid to the maintenance of wheel hubs. The main parameters of a car wheel hub include: hub size, PCD, offset (ET), and center bore. Hub size consists of two parameters: the diameter of the tire ring and the width of the tire ring. PCD: Refers to the pitch circle diameter of the wheel hub's bolt holes. Offset (also known as offset or ET): This is the distance between the mounting surface and the centerline of the wheel hub, used to adjust the wheel track and ensure the wheel does not interfere with the car body. Center Bore: This is the large hole in the middle of the wheel hub. Depending on the characteristics and requirements of different car models, the surface treatment process of the wheel hub may vary, generally categorized into painting and electroplating. For standard car models, wheel hubs are less focused on appearance, with good heat dissipation being a basic requirement. The process typically involves painting, which includes spraying followed by baking, offering an economical cost, vibrant colors, and long-lasting durability. Wheel Hub Maintenance: Choose the right cleaner: Household cleaners and common dishwashing detergents on the market, being either alkaline or acidic, can be highly corrosive to the wheel hub's surface. Opt for a neutral soap solution to clean and avoid exposing the wheels to strong chemicals. When the wheel hub is at a high temperature, avoid washing it directly with cold water. Wait for it to cool naturally before cleaning, as immediate cold water contact can damage the aluminum alloy hub and even deform the brake disc, affecting braking performance.

6

0

Share

What is the range of the Senya R7 new energy vehicle?

How long should I wait for the second attempt at Subject 1?

How to Deal with Stains Left on the Roof After Using Foam Cleaner?

How to Use a Nissan Dash Cam?

How to Remove and Install a Wiper Motor?

How to Step on the Clutch and Brake When Starting?

Where is the wheel hub located on a car?

How to Fold a Car Warning Triangle?

Will a fire extinguisher explode in a car during hot weather?

How to Choose Between S90 and A6L?

How to Repair a Faulty Wiper Motor?