What is the range of the Senya R7 new energy vehicle?

1 Answers
LeilaRose
07/29/25 11:50pm
Senya R7 new energy vehicle has a range of approximately 375 kilometers. The Ministry of Industry and Information Technology tests the range under relatively ideal conditions, so the actual range may be slightly lower. The Senya R7 is a pure electric vehicle, equipped with an 80kW motor that delivers a maximum torque of 228 Nm. The Senya R7 is a compact SUV newly launched by FAW in China. While maintaining the practicality, durability, and economy of the Senya series multi-purpose vehicles, it has seen significant improvements in quality, craftsmanship, power, comfort, and safety.
Was this review help?
16
1
Share
More Forum Discussions

What does the MAX A/C button in a car mean?

The MAX A/C button on a car's air conditioning system refers to the maximum cooling mode, which is the coldest setting available. MAX A/C is a feature-specific button found in certain vehicle models. Pressing this button maximizes the distribution of cooled air through the dashboard vents, making the air conditioning system more efficient for rapid cooling. This function is particularly useful when quick temperature reduction is needed. Below are some precautions for using the air conditioning system: 1. Turn off A/C during startup and rapid acceleration: Since the air conditioning (non-independent type) consumes some of the engine's power, it is advisable to turn off the A/C when starting the vehicle or during rapid acceleration. Once the vehicle is in motion, the A/C can be turned back on. This prevents engine power loss during acceleration and startup while also improving fuel efficiency. 2. Adjust the vent direction: Based on the principle that cold air sinks and hot air rises, drivers should direct the vents upward when using the cooling function and downward when using the heating function. 3. Avoid turning on the A/C immediately after the car has been exposed to sunlight: The interior temperature of a car can become extremely high after prolonged exposure to sunlight. In such cases, it is best to first open the windows for ventilation to allow the hot air to escape before turning on the A/C.
8
1
Share

What Causes Loud Noise When Driving at High Speeds?

When driving at speeds exceeding 100 km/h on highways, the noise inside the vehicle can become very loud, primarily due to the following reasons: 1. Wind noise: The intensity of wind noise is related to the vehicle's body shape, which is determined by design and does not change suddenly. If the wind noise suddenly increases during driving, it is mostly due to localized deformation or significant damage to the vehicle body. Apart from the body generating wind noise, at high speeds, air being sucked out through various gaps in the cabin can also produce loud sounds. If the wind noise fluctuates, it is advisable to check the rubber sealing strips around the doors for any air leaks. Reducing wind noise mainly involves improving the vehicle's sealing. 2. Tire noise: The level of tire noise is directly influenced by speed, load, and tire tread patterns. For passenger cars, 70% of tire noise comes from tread design. If tire noise is excessive, first ensure the tire pressure is within the appropriate range, the tires are not damaged or excessively worn, and the vehicle is not significantly overloaded. 3. Engine noise: This is related to the engine's design and operating condition, with the most critical factor being engine maintenance. Good lubrication and well-functioning components are prerequisites for smooth engine operation. When the engine is in optimal condition, its actual noise level reflects the vehicle's design standards.
14
1
Share

What is the difference between Coaster and K-Car?

The difference between Coaster and K-Car lies in their powertrains: the imported Coaster is equipped with a four-cylinder engine, with a maximum power output of 113kw; the domestic K-Car is equipped with a 4.0-liter V6 engine, with a maximum power output of 171kw. The Coaster has both domestic and imported versions, with most people referring to the domestic version as K-Car and the imported version as Coaster. The imported version differs in appearance and interior design. In terms of configuration, the domestic version is generally higher, while the imported version has relatively lower configurations without modifications. The Coaster is synonymous with 'luxury buses' produced by Toyota, offering precise handling while retaining strong power and comprehensive safety and comfort.
16
0
Share

Does Mirror Crossing the Line in Reverse Parking in Subject 2 Result in Failure?

Generally, crossing the line with the rearview mirror during reverse parking in Subject 2 does not result in penalty, depending on the specific markings at each test site. According to the "Motor Vehicle Driver Training and Examination Syllabus," as long as the vehicle body does not exceed the ground markings during reverse parking, no points are deducted. Since rearview mirrors are protruding, whether they are considered part of the vehicle body depends on the recognition standards of each local test site. Failing the test occurs if the vehicle body crosses the line, fails to enter the parking space, stops midway, does not follow the prescribed route, violates the sequence, or exceeds the time limit, all of which result in a 100-point deduction. Subject 2 is scored out of 100 points, with evaluation criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The rules for the Subject 2 motor vehicle driver's license test state that stopping midway, rolling back, or not following voice prompts result in failure. Additionally, crossing the line with wheels or the vehicle body also leads to failure. Many learners encounter line-crossing issues during Subject 2 training, with "crossing the line" being the most common reason for failure. The main cause of wheel line-crossing is the learner's failure to master the correct timing for steering. Besides missing the steering timing, another reason could be the steering speed not keeping up with the vehicle speed. Subject 2 Deduction Standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using turn signals (including starting, lane changing, overtaking, turning, and parking); using turn signals for less than three seconds (note: this is easily overlooked!); forgetting to turn off turn signals or using them incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse Parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Failing to enter the parking space: 100-point deduction. Before reversing, not having both front wheels cross the control line: 100-point deduction. Exceeding the 210-second time limit: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Slope Parking and Starting: After stopping, if the front bumper is not aligned with the pole line and exceeds 50 cm forward or backward: 100-point deduction. After stopping, if the front bumper is not aligned with the pole line but does not exceed 50 cm forward or backward: 10-point deduction. After stopping, exceeding the 30-second start time: 100-point deduction. Wheels crossing the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After stopping, if the vehicle body is more than 50 cm from the road edge line: 100-point deduction. Not tightening the parking brake after stopping: 10-point deduction per occurrence. After stopping, if the vehicle body is more than 30 cm but less than 50 cm from the road edge line: 10-point deduction per occurrence. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction per occurrence. Parallel Parking: After parking, if the vehicle body crosses the line: 100-point deduction. Not using or incorrectly using turn signals when entering the parking space: 10-point deduction. Exceeding the 90-second time limit: 100-point deduction. Touching the parking space edge line while driving: 10-point deduction per occurrence. Wheels touching the lane edge line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. 90-Degree Turn: Wheels crossing the road edge line: 100-point deduction. Not using or incorrectly using turn signals during the turn, or not turning them off after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve Driving: Wheels crossing the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Not driving in second gear or higher: 5-point deduction.
2
2
Share

Do vehicles need annual inspections after six years?

After six years, vehicles require annual inspections, which is part of the standard annual inspection process. Below are detailed explanations: 1. Explanation one: Passenger vehicles for commercial use must be inspected once a year within the first five years, and every six months thereafter. 2. Explanation two: Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first ten years, and every six months thereafter. 3. Explanation three: Small and mini non-commercial passenger vehicles must be inspected once every two years within the first six years, once a year thereafter, and every six months after fifteen years.
1
3
Share

Which One is the Clutch in a Car?

The leftmost pedal is the clutch. More details about the car clutch are as follows: 1. Introduction: The output shaft of the clutch is the input shaft of the gearbox. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the gearbox, thereby cutting off or transmitting the power from the engine to the transmission. 2. Principle: The driving part and the driven part of the clutch transmit torque through friction between contact surfaces, or use liquid as a transmission medium (hydraulic coupler), or magnetic transmission (electromagnetic clutch), allowing temporary separation and gradual engagement, while permitting mutual rotation during the transmission process.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.