What is the range of the Ora Black Cat in kilometers?

How to Make a U-Turn with a Manual Transmission?

Here are the steps for making a U-turn with a manual transmission: 1. Turn on the left turn signal, and if you're not very skilled, reduce speed to around 20; 2. Press the clutch and shift to second gear. After shifting, release the clutch but keep your foot near the pedal, as you may need to press it suddenly in case of an emergency to stop the car; 3. When your left shoulder is parallel to the point where you intend to make the U-turn, start turning the steering wheel. If you're more experienced, regardless of whether you're at 30 or 50, you can press the clutch firmly and then the brake pedal to reduce speed below 20, and then turn the wheel when conditions are suitable; 4. After completing the U-turn or turn, check your speed again. Typically, the speed will be around 10, and then you can press the clutch and shift to second gear.

13

4

Share

Is Rolls-Royce a Four-Wheel Drive Vehicle?

Rolls-Royce is not a four-wheel drive vehicle; all models from Rolls-Royce adopt a front-engine, rear-wheel-drive layout. The reason Rolls-Royce does not use a four-wheel drive system is due to considerations for the car's handling. The advantage of rear-wheel drive is its superior handling. In front-engine, rear-wheel-drive cars, the rear wheels are responsible for propulsion while the front wheels focus more on steering, making the car more responsive during driving. Front-engine, rear-wheel-drive cars have balanced weight distribution between the front and rear, resulting in excellent stability and smoothness. This layout also helps extend the lifespan of the car's tires. However, the production cost of rear-wheel-drive cars is relatively high, and space utilization is not very convenient. Additionally, during driving, rear-wheel-drive cars may sometimes exhibit oversteering tendencies. Since the car's power needs to be transmitted through the driveshaft, the power loss in rear-wheel-drive cars is greater compared to front-wheel-drive cars. However, this does not affect the normal driving experience of Rolls-Royce vehicles.

15

2

Share

How to distinguish between Corolla and Corolla EX?

Both Corolla and Corolla EX are Toyota Corolla models, but the early Chinese name was translated as Corolla EX, which was later renamed to Corolla. The differentiation methods are as follows: 1. The ninth-generation Corolla began domestic production and sales in 2004 under the name Corolla EX. 2. Starting from the tenth generation, the Chinese name of Corolla was changed to Corolla (first launched in China in 2006 and officially released in 2007), while the older ninth-generation Corolla EX continued to be produced and sold. The relevant introduction of Corolla is as follows: 1. The body dimensions are 4635mm in length, 1780mm in width, 1455mm in height, with a wheelbase of 1435mm. 2. It is equipped with a 1.2T turbocharged engine and a 1.8L naturally aspirated engine, with an L-type cylinder arrangement, 4 cylinders, and 4 valves per cylinder. It comes with a 10-speed continuously variable transmission and an electronic continuously variable transmission.

10

4

Share

Can a Flooded Car After Heavy Rain Still Be Driven?

Whether a flooded car after heavy rain can still be driven depends on the extent of water submersion. If the water level did not exceed the wheels, the car can be driven normally. However, if the submersion level is too high, it may affect the car's electrical circuits, making it unsafe to drive. First, observe the water level relative to the vehicle, particularly whether it has reached the engine or other critical interior components. If the water has risen to a certain height, it can severely impact the car's electrical system, engine, and other parts. If the water has reached the hood level, it is best to inspect the car for damage and avoid starting the vehicle. If the car stalls after being submerged, do not attempt to restart it, as this could cause a second stall and potentially further damage the engine, which may affect insurance claims later. After the car is flooded, the first step is to disconnect the battery by removing the positive and negative terminals. Additionally, shift the car's gear to neutral. It is crucial to notify the insurance company immediately, providing details about the situation, the submerged parts of the car, and its location. The insurance company will then conduct an on-site inspection to assess the damage.

3

4

Share

Can High Beam Lights Improve Visibility?

Yes. The function of high beam lights: High beam lights can illuminate objects that are higher and farther away, providing significant assistance to the driver's visibility at night. The intensity of the light is adjusted based on the distance of the filament. High beam lights focus the light parallelly, making it more concentrated and brighter, which allows them to illuminate distant and high objects. How to turn on high beam lights: Locate the high beam switch on the lever on the left side of the steering wheel or the light knob on the left side of the steering wheel; turn on the low beam lights, then push the lever downward (toward the engine direction), and the dashboard will display an indicator, indicating that the high beam lights are on. High beam lights focus the light parallelly, making it more concentrated and brighter, which allows them to illuminate distant and high objects. Low beam lights, on the other hand, emit light in a divergent state (between 1x to 2x the focal length), illuminating a larger area of nearby objects. The difference between high beam and low beam lights is that high beams have a higher angle and longer range, while low beams have a lower angle and shorter range.

3

1

Share

Why do the taillights remain on after the engine is turned off?

If the taillights remain on after the engine is turned off, it may be because the car is not locked, the brake switch is faulty, or due to other reasons. Car not locked: If the car is not locked, the vehicle is in standby mode, which is normal. Wait for a while, and it should turn off. Brake light switch failure: If the brake switch is faulty, it can also cause the taillights to remain on after the engine is turned off. It is recommended that the owner replace the brake light switch. Other situations: If only one taillight is on, there is no need to panic. This is actually the vehicle's parking light function, designed to warn passing vehicles at night. Generally, this hidden feature is activated after parking and turning off the engine by turning the turn signal to the side where the light should be on. If the turn signal lever is accidentally bumped after turning off the engine, this function may be unintentionally activated.

16

0

Share

What is the range of the Ora Black Cat in kilometers?

How to Make a U-Turn with a Manual Transmission?

Is Rolls-Royce a Four-Wheel Drive Vehicle?

How to distinguish between Corolla and Corolla EX?

Can a Flooded Car After Heavy Rain Still Be Driven?

Can High Beam Lights Improve Visibility?

Why do the taillights remain on after the engine is turned off?

What Are the Causes of Engine Belt Wear?

Where are the frame number and engine number of a motorcycle located?

Does a new car come with a vehicle license?

Does a Steering Wheel Cover Affect Safety?