What is the range of the BYD Han EV in kilometers?

3 Answers
MacGemma
07/28/25 12:26pm
There are currently 15 models of the BYD Han available for sale. Among them, the 2022 DM-i Honor/Luxury models have a range of 121 km, the 2022 DM-p 202KM AWD Flagship model has a range of 202 km, the 2022 DM-i 242KM model has a range of 242 km, the 2021 EV Standard Range Luxury model has a range of 506 km, the 2020 EV Extended Range Luxury model has a range of 605 km, the 2020 DM AWD Performance Premium/Luxury models have a range of 81 km, and the 2020 EV Extended Range Premium model has a range of 605 km. The above ranges are based on a full charge and are NEDC officially published data. During daily driving, the current range of the BYD Han can be viewed on the instrument display panel. The range is directly related to the three key systems of an electric vehicle: the battery, electric drive, and electric control. Battery System: The capacity of the power battery directly determines the range. Additionally, excessively high or low temperatures in the battery system can also affect the range. With the same battery capacity, more stable battery temperatures better ensure the range. Electric Drive System: This mainly includes the drive motor, controller, inverter, and reducer. Its efficiency is determined by the ratio of input power to output power. When the battery capacity is fixed, under the same voltage, the output energy is determined by the efficiency of the drive system. Automakers strive to optimize motor and control efficiency to reduce energy consumption and improve range. Vehicle Control System: This primarily coordinates the relationship between the battery, drive system, and chassis brake energy recovery. Under conditions of frequent acceleration and deceleration, the proportion of energy recovery (brake energy recovery) can be dynamically adjusted based on the battery's state and braking needs, thereby improving energy efficiency. In addition, the braking energy recovery strategy of an electric vehicle can directly increase the vehicle's driving range.
Was this review help?
15
4
Share
DeJaxon
08/11/25 5:13pm
As a BYD Han EV owner for nearly a year, I find its range performance quite reliable in personal experience. Official data shows a range between 506 to 715 km depending on versions, with my long-range version rated at 605 km CLTC. For urban commuting, a single charge lasts about a week, covering approximately 450-550 km; on highways with strong AC usage, it drops to around 400 km. In cold winters, range decreases faster, possibly by 10%-15%, but returns to normal in summer. I recommend smooth acceleration and proper use of regenerative braking for better range durability. For occasional long trips, charging stations along the route are conveniently planned, making it more than sufficient for commuters like me. EVs save significantly compared to fuel cars, with monthly charging costs just tens of yuan, plus the quiet and comfortable drive – I'm quite satisfied.
Was this review help?
20
0
Share
Expand All
KaiMarie
09/28/25 6:57am
As an automotive technology enthusiast, I've studied the battery details of the BYD Han EV. Its range varies by configuration: approximately 506 km for the standard version, 550 km for the all-wheel-drive performance version, and up to 715 km CLTC for the premium version. Actual mileage is significantly influenced by driving habits—rapid acceleration or high-speed cruising consumes energy faster, while smooth city driving can maintain values close to the rated range. The battery utilizes blade cell technology, optimizing energy density, and regenerative braking significantly extends the range by recovering energy. Weather is also a critical factor; battery efficiency drops in sub-zero temperatures, and air conditioning increases power consumption in hot weather. To maximize range, I maintain proper tire pressure and reduce unnecessary load. These details ensure stable range for the Han EV, with fast charging capable of replenishing 80% in 30 minutes, making it very convenient for daily commuting.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What does it mean when a motorcycle's yellow warning light is on?

Motorcycle yellow warning light may illuminate due to reasons including: poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinder, or faults in the ignition system. Below are detailed explanations of potential causes: Poor air-fuel mixture combustion: When the engine's air-fuel mixture burns poorly, and the mixture in the cylinder becomes too rich, the vehicle may exhibit symptoms such as knocking and vibration. When the mixture is too lean, the vehicle may experience poor acceleration performance. Ignition system: Malfunctions in spark plugs, high-voltage wires, or ignition coils can lead to poor ignition system performance. If spark plugs fail to produce proper sparks, this may trigger the engine warning light and cause vehicle vibration with insufficient power.
17
0
Share

How to Display Fuel Consumption on the Geely Jiaji Dashboard?

You can view it by adjusting the buttons on the left side of the steering wheel. The fuel consumption display is divided into average fuel consumption and instantaneous fuel consumption. This relationship is not absolute. Under the condition that all other factors are the same, an engine with a larger cylinder volume will definitely have higher power and fuel consumption. During daily driving, the maximum RPM of an ordinary family car is only around 6000 RPM. Widening and enlarging the tires increases the friction of the tires, which is equivalent to increasing the load on the car, thus directly increasing the car's fuel consumption.
16
0
Share

469599

Gasoline Filter The gasoline filter, commonly referred to as the fuel filter, is primarily used to remove impurities from gasoline. Below is a detailed introduction: Introduction: The gasoline filter is abbreviated as the fuel filter. There are two types of gasoline filters: built-in and external. The built-in gasoline filter is usually installed inside the fuel tank along with the fuel pump and needs to be replaced every 100,000 kilometers. The external gasoline filter is typically installed in the fuel line, making it easier to replace, and it is generally replaced every 20,000 kilometers. Function: The main function of the gasoline filter is to filter out impurities from the gasoline, ensuring that the fuel entering the engine for combustion is clean. This leads to more complete combustion, reduces carbon deposits in the cylinders, and improves power output.
2
4
Share

Do I need to collect the inspection sticker during the biennial vehicle inspection?

For the biennial vehicle inspection, you need to collect the inspection sticker. Here are the details: Exemption: New vehicles enjoy a 6-year exemption from physical inspection, but the annual inspection sticker must be renewed every two years. The exemption only means the vehicle does not need to go to an inspection station. Nowadays, you can stay at home and use your phone to receive the biennial inspection sticker. Vehicle inspection notes: Note that small and micro non-operational passenger vehicles must be inspected every 2 years within the first 6 years; annually after 6 years; and twice a year after 15 years. Operational passenger vehicles must be inspected annually within the first 5 years and every 6 months after 5 years. Trucks and large or medium non-operational passenger vehicles must be inspected annually within the first 10 years and every 6 months after 10 years.
19
2
Share

Is the vehicle inspection time based on the date on the driving license?

Vehicle inspection time is based on the date on the driving license, which refers to the registration date. Introduction: Annual inspection refers to the annual or biennial safety inspection of vehicles, including a comprehensive check of components such as horns, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Vehicle annual inspection is a mandatory test for all vehicles that have obtained official license plates and driving licenses, equivalent to an annual physical examination of the vehicle according to the safety technical conditions for motor vehicle operation. Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Time: Vehicle annual inspection can be conducted within the last 3 months before the expiration of the vehicle inspection period.
5
3
Share

How Many Points Are Deducted for Obstructing a License Plate?

Intentionally obstructing a license plate will result in a deduction of 12 points, along with corresponding fines. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Driving a motor vehicle on the road without displaying a motor vehicle license plate, or intentionally obstructing, defacing, or not installing the motor vehicle license plate as required, will result in a 12-point deduction. Introduction: License plates, commonly known as vehicle plates, refer to the plates displayed on the front and rear of a vehicle, which are engraved with the vehicle's registration number, registration region, or other relevant information. Function: License plates serve as a numbering and information registration system for vehicles. Their primary function is to identify the region to which a vehicle belongs and to allow tracking of the vehicle's owner and registration details based on the plate.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.