What is the range of the BYD e1?

1 Answers
GarrettAnn
07/30/25 6:34am
The range of this vehicle as given by the Ministry of Industry and Information Technology is 305 kilometers. Here is more information about the BYD e1: 1. The BYD e1 is a pure electric microcar, and its exterior design is identical to the BYD F0. The BYD e1 is a single-motor model, with a maximum motor power of 45 kW and a maximum torque of 110 Nm. The motor is front-mounted, making the car front-wheel drive. 2. The front suspension of the BYD e1 uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. Microcars typically use torsion beam suspensions for the rear because they occupy less space, and there is usually not enough room in the rear of a microcar to install a more complex independent suspension. Using a torsion beam suspension also helps to maximize rear passenger space and trunk space, which is crucial for microcars. 3. The dimensions of the BYD e1 are 3465 mm in length, 1618 mm in width, and 1500 mm in height, with a wheelbase of 2340 mm.
Was this review help?
12
0
Share
More Forum Discussions

How to Turn on the Air Conditioning for Cooling in a Cayenne?

After starting the car's ignition, wait for 5-10 minutes until the water temperature rises to the normal level, at which point you can turn on the heating. Adjust the air conditioning's circulation mode to the internal circulation setting. Press the AC button to turn on the air conditioning. Set it to the cooling mode, indicated by the blue zone. Adjust the air conditioning to a suitable fan speed setting. For heating, direct the airflow towards the front and footwell areas; for cooling, direct the airflow towards the front.
15
1
Share

How to Activate the Lift Mode on Land Rover Discovery 4?

After starting the vehicle, it remains in the middle position, and the lift button is in the off state. When the speed exceeds 140km/h or the vehicle is put into sport mode, the vehicle lowers by 10mm, and the lift button remains off. Manually press the lift button, and it will stay illuminated. When the speed exceeds 40km/h, the vehicle automatically returns to the middle position. Note: If you plan to lift the vehicle with a jack, it's advisable to lock the air suspension in advance.
19
1
Share

How to Repair a Motorcycle Front Brake That Doesn't Retract?

Support the vehicle securely with the main stand; locate the position of the brake lever arm; spray and clean the lever arm with a cleaning agent. Periodically shake the brake pedal by hand; after cleaning, press it down and it should retract. If normal function is restored after cleaning, apply a small amount of engine oil for lubrication.
3
4
Share

How to Use the Left Rearview Mirror for Curve Driving?

Straighten the vehicle body before entering the curve. When the small left mirror of the vehicle touches the right boundary line, turn the steering wheel one full turn to the left. When the small right mirror touches the right boundary line, straighten the steering wheel and continue driving. Maintain the small right mirror along the left boundary line by adjusting the steering left and right to navigate the curve. Align the front of the car with the exit of the S-curve and straighten the steering to exit.
3
4
Share

How to Determine Secondary Ignition After Wading Through Water

Check for musty odors inside the car. Water-damaged vehicles often have musty smells in hidden areas such as floor mats, trunk liners, and under the seats. Look for rust or disassembly marks. Inspect seat tracks for rust or mud/water stains, and check for watermarks or dirt at the ends. Press buttons or turn knobs. If most buttons and knobs feel sticky or have rebound resistance, it's due to sediment in the gaps affecting their movement after water exposure. Check for rust and metal shavings. Examine various connectors for mud deposits, and also inspect the vehicle's headlights for accumulated water or condensation.
7
4
Share

What to Do If Your Car Gets Flooded?

If water enters the exhaust pipe after driving through water, immediately call for roadside assistance and wait for rescue. If the water in the exhaust pipe is not severe, you can inspect the electronic systems yourself and remove any accumulated water under the car body. If the car has been severely flooded, you will need a roadside assistance vehicle to tow it to an auto repair shop for servicing.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.