What is the R32?

2 Answers
FrankDella
09/04/25 7:33am
R32 is the first generation of Golf R. The number following the R represents the engine displacement of the vehicle. The fourth and fifth generations of Volkswagen Golf R both used a 3.2L VR6 engine. The famous W12 engine is formed by combining two VR6 engines. Due to the 3.2L displacement, these two generations of Golf R are referred to as Golf R32. Below is some relevant information about the Volkswagen R32: The Volkswagen R32 itself is a high-performance hot hatch. The Volkswagen R division equipped it with a 3.2L VR6 engine, producing a maximum horsepower of 247PS and a maximum torque of 320NM, paired with a six-speed manual transmission and a 4MOTION all-wheel-drive system.
Was this review help?
15
4
Share
DelStephen
09/16/25 8:22am
Speaking of the R32, I remember it vividly as the most iconic generation of the Nissan Skyline series, which made its debut in 1989 and was hailed as the 'Godzilla' of the road. It was equipped with a twin-turbocharged inline 6-cylinder engine, delivering an impressive 300 horsepower—a figure that still holds up today. The all-wheel-drive system provided exceptional stability, allowing it to dominate the racetrack. In the early 1990s, it swept through Australia's Group A racing series, becoming the benchmark for Japanese performance cars. Even now, some vintage car enthusiasts still revere it, with its second-hand market price fluctuating wildly. Well-maintained models can fetch hundreds of thousands, and I've personally seen a few restored R32s whose engine roar at ignition remains as fierce as it was back in the day.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the 2020 Teana model?

2020 Teana model has a fuel tank capacity of 61.3 liters, which is the officially announced data. Owners who have purchased the 2020 Teana can also check this information on the vehicle's configuration sheet. The 2020 Teana requires 92-octane gasoline, with a fuel consumption of 5.9L per 100 kilometers. A full tank of fuel can cover a distance of approximately 1038 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the fuel level. The fuel gauge usually has 5 to 6 segments, and it is recommended to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel filled may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This extra space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel filled may exceed the marked tank capacity.
17
2
Share

Can dishwashing detergent remove oil film from cars?

Dishwashing detergent can remove oil film from cars, but it is not recommended as a car cleaning product. Generally, specialized oil film removers are used. Extended information about car cleaning is as follows: Introduction: Car cleaning refers to the cleaning of a car's exterior, which is a common task for every car owner or driver. In recent years, car wash shops have gradually become a hot investment project in many large and medium-sized cities. Classification: Car cleaning is divided into two types: regular cleaning and detailed cleaning. Regular car cleaning refers to traditional manual car washing and tunnel car washing. The other type is detailed car cleaning technology, which involves both interior and exterior cleaning, providing a more thorough and cleaner result compared to traditional car washing.
20
3
Share

Can a B1 driver's license drive a truck?

B1 driver's license can only drive light and mini trucks. The following is relevant information about the B1 driver's license: 1. Introduction: The permitted vehicle type for a B1 license is a medium-sized passenger vehicle, defined as a medium-sized passenger vehicle not exceeding 6 meters in length, with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. Other permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). It is important to note that the B1 license does not include B2 in its permitted vehicle types. If a driver holding a B1 license wishes to drive large trucks, they can upgrade their license to a B1B2 license (or A1, A2, A1A2, etc.). 2. Conditions for upgrading to B1: The applicant must have held a (C1) driver's license for more than three years, be between 21 and 50 years old, and have no full-score (12 points) record in the current scoring cycle (this year) and the most recent scoring cycle (last year) before applying. They can then apply for the upgrade at the vehicle management office in their registered residence, as regulations stipulate that the upgrade to B1 can only be processed at the vehicle management office in the driver's registered residence, not at a temporary residence.
19
3
Share

What Causes a Clicking Noise When Turning the Steering Wheel?

When this situation occurs, a thorough inspection is necessary because there are many potential causes. For instance, the sound could be from the turn signal returning to its position, which is normal. Other possible causes include noises from the steering column dust cover, friction between plastic components, sounds emanating from within the steering wheel, abnormal noises from the shock absorber's thrust bearing, or noises from the stabilizer bar. Here are the relevant details: 1. Steering Column Dust Cover: If the issue is with the steering column dust cover, simply replacing the dust cover or reapplying grease can resolve it. However, reapplying grease is only a temporary solution. Additionally, since the steering wheel is composed of various plastic parts, if the gaps between them are too small, noises may occur, especially in new cars. These noises usually disappear after a break-in period. If the noise persists after the break-in period, try reinstalling the steering wheel. If the noise originates from inside the steering wheel, it might be due to a broken clock spring or a loose clock spring connector. Replacing the clock spring or securing the connector can fix the issue. 2. Thrust Bearing: If the problem lies with the thrust bearing, replacing it is the solution. The thrust bearing connects the vehicle body to the shock absorber, preventing direct friction. It consists of components such as a dust cover, raceway, and ball bearings, located at the top of the shock absorber assembly. Therefore, issues with the thrust bearing can also cause noises when turning the steering wheel.
1
3
Share

What are some good solutions when the car keys are locked inside the car?

Solutions for retrieving car keys locked inside the vehicle are as follows: Spare Key: If the spare key is at home and within a short distance, you can retrieve it. Professional Locksmith or 4S Store Technician Assistance: You may opt for a certified locksmith service, though the cost tends to be higher. If locksmith services are unavailable, seeking help from a 4S store technician is also an option. Contacting a Service Center to Duplicate a New Key: Service centers can typically duplicate a new key based on the vehicle model. However, duplicating a new key requires the owner to provide a 17-digit anti-theft code, which is supplied by the 4S store at the time of purchasing the new car.
20
0
Share

What car has five slashes as its logo?

A car emblem with five slashes represents the older model of Fiat. Here is some relevant information about Fiat: Status: Fiat is the world's first microcar manufacturer, a classic brand with over a century of history, and has always been regarded as the creator of perfect cars. It is a famous Italian automobile manufacturing company and one of the world's top ten automobile companies. Production Locations: Fiat not only has factories in Italy, Argentina, Brazil, Poland, and Venezuela but also extends its business worldwide through joint ventures and licensing agreements. It has adopted a strategy of moderate investment in emerging markets such as Poland, Russia, Brazil, Argentina, Egypt, Morocco, South Africa, Turkey, India, and China.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.