What is the quick solution for foggy headlights?

Is a tire pressure of 280 too high in summer?

The value is somewhat high. For family cars in summer, the recommended tire pressure is between 230 and 260. Using 280 is not advised for two reasons: firstly, it affects the ride comfort of the vehicle, and secondly, it significantly increases the risk of tire blowouts during high-speed driving. Below is additional information: 1. Effects of high tire pressure: It can affect the vehicle's braking distance, reduce the tire's grip on the road, shorten the tire's lifespan, accelerate tread wear and aging, impair normal driving, increase fuel consumption, and in severe cases, lead to tire blowouts. Excessive tire pressure causes tire deformation, reduces overall elasticity, and increases load. 2. How to check tire pressure: Vehicles equipped with tire pressure monitoring systems can display the pressure on the dashboard or central console. Alternatively, visit a tire repair shop to use professional equipment for inspection. If the pressure is too low, it needs to be replenished; if it's too high, it should be reduced.

20

2

Share

What Causes the Abnormal Noise When Starting an Automatic Transmission Car?

Automatic transmission cars produce a clunking sound when starting due to internal transmission issues and excessively low engine RPM. Internal transmission problems: Excessive wear creates gaps, resulting in play during startup that causes clunking noises. Excessively low engine RPM: Insufficient output torque can cause gear dragging, potentially leading to abnormal noises. During rapid acceleration when engine RPM rises extremely quickly, the transmission may produce an impact when shifting from 1st to 2nd gear. When heavily depressing the accelerator to raise RPM to 5000-6000 or higher, the transmission must suddenly reduce this high RPM to 2000-3000 through gear shifting to stabilize engine speed, creating impact during this process. Maintenance methods: Replace transmission fluid and perform comprehensive transmission maintenance. Additionally, avoid aggressive daily driving to prevent accelerated transmission wear. Another important note: regardless of gear shifting operations, always use the foot brake to completely stop the vehicle first.

11

4

Share

How Long Does It Take for a New Car to Complete the Break-in Period?

Generally, it takes 1000~1500 kilometers. Below is relevant information about the car break-in period: 1. Concept: Break-in is also known as running-in. The car break-in period refers to the initial driving phase of a new car or after a major overhaul, typically 1000~1500 kilometers. This is the essential mileage required to ensure that mechanical components fully contact, frictionally adapt, and settle into their final form. During this period, the car's various parts can adjust and enhance their ability to adapt to the environment, while also wearing down any protrusions on the components. 2. Key Points to Note: Piston rings are usually composed of compression rings and oil rings. As the names suggest, compression rings are used to seal gases (preventing the mixture or exhaust gases in the cylinder from entering the crankcase, thereby avoiding a decrease in engine power and preventing oil contamination), while oil rings are used to seal oil (since the crankshaft flings oil from the crankcase onto the cylinder walls, the oil ring's role is to scrape off this oil), preventing oil from entering the combustion chamber and causing oil burning issues.

7

2

Share

How many kilometers is a one-hour drive?

Driving speed varies, so the distance traveled in one hour also differs. Below is an introduction to driving speed: 1. Introduction: The distance a vehicle travels in a unit of time, referred to as driving speed. The commonly used units are kilometers per hour or meters per second. Vehicle speed is one of the three parameters used to describe traffic flow and holds significant importance in traffic flow theory research. 2. Function: Vehicle speed can also broadly refer to motor vehicle speed. To suit different purposes, vehicle speed is mainly categorized into spot speed, segment speed, and design speed. 3. Legal speed limits: According to the 'Road Traffic Safety Law' and its implementation regulations, on roads without a central dividing line, the speed limit is 40 kilometers per hour; on roads with only one motor vehicle lane in the same direction, the speed limit is 70 kilometers per hour; when entering or exiting non-motorized lanes, passing through railway crossings, sharp curves, narrow roads, narrow bridges, or when making U-turns, turning, or descending steep slopes, the speed limit is 30 kilometers per hour. The maximum speed limit on highways is 120 kilometers per hour.

17

4

Share

Is it necessary to shift to second gear when crossing an intersection?

The principle of crossing an intersection is to slow down, look around, and then proceed. You must reduce speed, but whether to shift to second gear depends on whether the speed meets the conditions for shifting. Below are specific tips for shifting gears in a car: 1. Downshift after slowing down: Before upshifting, increase the speed; before downshifting, release the throttle to reduce the speed first. Always fully depress the clutch pedal before shifting, and operate the gearshift lever gently, quickly, smoothly, and accurately. 2. Master the timing of shifting: Shift when the engine speed is around 2000 RPM. First press the throttle, then depress the clutch to prevent the clutch from being forcibly disengaged, and then shift. The downshift sequence depends on the speed. Generally, downshift when the engine speed drops below around 1500 RPM, depending on the car's condition. 3. Make shifting movements smooth: Depress the clutch fully in one motion, and shift gears decisively. Familiarize yourself with the gear positions. If you encounter difficulty shifting into gear, shift to neutral, release the clutch briefly, depress the clutch again, and then shift into gear.

13

3

Share

How to adjust the right rearview mirror for reversing into the garage in Subject 2?

For the right rearview mirror, the upper edge should allow you to see the rear door handle. Below are relevant introductions about reversing into the garage: 1. Evaluation criteria for reversing into the garage: Failing to follow the prescribed route and sequence will result in disqualification. Disqualification also occurs if the vehicle body crosses the line, fails to enter the garage during reversing, or stops midway. Not completing the reversing into the garage within 4 minutes will also lead to disqualification. 2. Three methods for reversing into the garage: For the "non-character type" reversing into the garage, the vehicle should be perpendicular to the target parking space. Using the B-pillar as a reference and the first parking space as a marker, the vehicle can generally reverse into the third parking space. For the "one-character type" parallel parking, use the front car as a reference, align the vehicle body, turn the steering wheel to the right, and observe. When the angle between the two cars reaches 45 degrees, straighten the steering wheel and continue reversing. If estimated correctly, the vehicle can be parked in one go.

9

4

Share

What is the quick solution for foggy headlights?

Is a tire pressure of 280 too high in summer?

What Causes the Abnormal Noise When Starting an Automatic Transmission Car?

How Long Does It Take for a New Car to Complete the Break-in Period?

How many kilometers is a one-hour drive?

Is it necessary to shift to second gear when crossing an intersection?

How to adjust the right rearview mirror for reversing into the garage in Subject 2?

What does 'remaining processable 11 points' mean?

What type of transmission is primarily used in automotive gearboxes?

What Are the Causes of Insufficient Fuel Pressure in a Car?

Is the Bora's engine made of iron or aluminum?