What is the purpose of the Vehicle Identification Number?

1 Answers
Dora
07/29/25 4:25pm
Vehicle Identification Number (VIN) serves as a car's ID number, determined according to national vehicle management standards. It contains information such as the manufacturer, year, model, body type and code, engine code, and assembly location. Below is a partial introduction about VIN: 1. Introduction: Vehicle Identification Number (VIN) is the abbreviation for Vehicle-Identification-Number. According to ASE standards, a VIN consists of 17 characters, hence it is commonly referred to as the 17-digit code. Correctly interpreting the VIN is crucial for accurately identifying the vehicle model and performing proper diagnosis and maintenance. 2. Explanation: The VIN should consist of three parts: Part one, World Manufacturer Identifier (WMI); Part two, Vehicle Descriptor Section (VDS); Part three, Vehicle Identifier Section (VIS).
Was this review help?
4
5
Share
More Forum Discussions

Is it allowed to change lanes over a solid line on the highway?

On highways, it is not allowed to change lanes over a white solid line. Prohibited markings: Violating the prohibition of marking instructions refers to driving against the prohibited markings, which include yellow solid lines on the ground (indicating no crossing of the central divider) and yellow crosses (indicating no parking). Driving over these markings constitutes a violation, such as changing lanes over a solid line, making a U-turn where it is not allowed, or turning left where left turns are prohibited—all of which are considered violations of prohibited marking instructions. Single or double yellow solid lines: Both are types of prohibited markings. Driving over or crossing these lines during travel is illegal. Additionally, not following the guiding markings in the corresponding lane at intersections also falls under the broader concept of the aforementioned regulations.
3
3
Share

How Many Years Until a Test Drive Vehicle is Scrapped?

Small passenger vehicles used for training purposes have a scrappage period of 10 years. Mandatory vehicle scrappage periods: Small and mini taxi passenger vehicles are used for 8 years, medium-sized taxi passenger vehicles for 10 years, large taxi passenger vehicles for 12 years, rental passenger vehicles for 15 years, small training passenger vehicles for 10 years, medium-sized training passenger vehicles for 12 years, large training passenger vehicles for 15 years, public transport passenger vehicles for 13 years, other small and mini operational passenger vehicles for 10 years, and large and medium-sized operational passenger vehicles for 15 years, etc. Standards for mandatory vehicle scrappage: Reaching the legally prescribed service life, failing to meet the national technical safety standards for in-use vehicles after repairs and adjustments, or still not meeting national standards for atmospheric pollutant emissions or noise levels after repairs, adjustments, or the application of control technologies.
8
2
Share

Can Waste Tires Be Refined into Oil?

Waste tires can be refined into oil. Since waste tires contain materials such as natural rubber and synthetic rubber, these substances can be decomposed to obtain tire oil through proper resource recycling. Tire Scrapping Standards: If a tire is found to be cracked, it should be replaced immediately. If a tire is severely worn, it will reduce the braking force of the vehicle. To prevent such situations, it is best to replace the tire promptly. During inspection, if the tire valve stem is made of rubber and turns dark red, it indicates that the valve stem has aged and can no longer ensure good airtightness, so it is best to replace it. Tire Lifespan: The service life of tires is generally 2-3 years or about 60,000-100,000 kilometers. When the tread depth reaches 1.6mm (minimum wear), the tires should be replaced immediately. Tires that exceed their shelf life (especially spare tires, which have a lifespan of approximately 3 years) will have significantly reduced overall performance.
10
5
Share

What is the fuel consumption of the Hyundai Custo?

Modern Custo parameters show that the 2.0L automatic transmission model has a combined fuel consumption of around 11L/100km. Correct fuel consumption calculation formula: Fuel consumed ÷ Distance traveled × 100 = Fuel consumption per 100km. The data on fuel consumed is relatively difficult to obtain accurately. Generally, a full tank is used as the initial data. After driving a certain distance, the tank is refilled to full, and the refueling amount provided by the gas station is used as the measurement. Fuel-saving tips: Idling for more than 1 minute consumes the same amount of fuel as starting the engine once. Five minutes of engine idling consumes enough fuel to drive the car for more than 1 kilometer.
1
2
Share

What are the differences between the 2022 XT5 and the 2021 model?

2022 XT5 and 2021 model differences are as follows: Maximum horsepower differs: The 2020 XT5 has a maximum horsepower of 241ps, while the 2021 model has 237ps. Maximum power differs: The 2020 XT5 has a maximum power of 177kw, while the 2021 model has 174kw. Configuration differs: The 2020 XT5 is equipped with a leather steering wheel, while the 2021 model features turn signals, multi-layer soundproof glass for the front windows. The vehicle's front suspension is a MacPherson independent suspension, and the rear suspension is a five-link independent suspension, with tire specifications of 235/65R18.
15
4
Share

What is the difference between a four-cylinder engine and a three-cylinder engine?

The differences between a four-cylinder engine and a three-cylinder engine lie in their structure, fuel consumption, and lifespan. Below is a detailed explanation of these differences: Structure: The three-cylinder engine has a simpler structure, smaller size, lighter weight, and easier layout. In contrast, the four-cylinder engine has a relatively more complex structure. The three-cylinder engine is designed with one fewer cylinder than the four-cylinder engine, resulting in fewer corresponding camshaft attachments. Fuel consumption: The three-cylinder engine has less pumping loss. Theoretically, having one fewer cylinder reduces resistance, leading to less mechanical friction and resistance loss compared to the four-cylinder engine. As a result, its fuel consumption is slightly lower. Lifespan: The three-cylinder engine has a relatively shorter lifespan. Due to greater cylinder stress and noticeable wear, the three-cylinder engine inherently exhibits more pronounced vibrations. The cylinders and crankshaft experience higher instantaneous forces, which theoretically results in greater wear compared to the four-cylinder engine. This, in turn, affects the engine's lifespan to some extent.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.