What is the purpose of the S mode?

How much does the Geely Boyue weigh?

Geely Boyue models with different configurations have varying weights. Depending on the specific model, the Geely Boyue weighs between 1565-1745 kilograms. Below is its relevant introduction: 1. The Boyue is a compact SUV under the Geely brand. This vehicle is equipped with two types of engines: a 2.0-liter naturally aspirated engine and a 1.8-liter turbocharged engine. 2. The 2.0-liter naturally aspirated engine has a maximum power output of 104 kW, a maximum torque of 178 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed ranging from 4000 to 4500 rpm.

9

4

Share

How to Add Windshield Washer Fluid to the Leiling?

Method for adding windshield washer fluid to the Leiling: 1. Turn on the windshield wiper spray switch to spray out the existing washer fluid; 2. When the spray nozzles stop spraying, open the washer fluid filler port and add a small amount of newly prepared washer fluid; 3. Activate the wiper switch again to completely clear out the old washer fluid solution; 4. When no more fluid sprays from the nozzles, fill with approximately 4L of washer fluid, then securely close the filler cap. Note that the Toyota Leiling's washer fluid capacity is 4L - add appropriate amounts according to remaining levels. There's no fixed interval for refilling washer fluid; frequency depends entirely on usage patterns.

4

Share

What is the oil specification for the Sylphy?

Sylphy uses engine oils with specifications such as 10W-30, 5W-30, and 5W-40. Detailed explanations about oil specifications are as follows: 1. The number before 'W' represents the oil's low-temperature fluidity. The lower the number, the better the fluidity at low temperatures. 2. The number after 'W' represents the oil's viscosity. Higher viscosity provides better sealing, while lower viscosity offers better fuel efficiency. 3. It's important to note that the selection of oil specification should be based on the local driving environment of the vehicle. Engine oil is the lubricant for engine operation. It plays a crucial role in lubricating, cleaning, cooling, sealing, and reducing friction in the engine. It significantly reduces wear on engine components and extends their service life.

13

1

Share

How to reset the tire pressure light on Volkswagen CC?

Method to reset the tire pressure light on Volkswagen CC: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. The tire pressure monitoring indicator is a yellow symbol, an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following reasons: Abnormal tire pressure: Usually, an alarm will be triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply perform a tire pressure reset.

7

4

Share

How to Operate the Mercedes-Benz Autonomous Parking System?

Mercedes-Benz Autonomous Parking System Operation Steps: 1. First, drive at a low speed below 30 km/h; 2. Then press the intelligent mode button on the central control panel to the right of the driver's seat, and the vehicle will automatically search for the nearest parking space; 3. When the central control screen displays the option to select a parking space and confirm, press the confirmation button on the steering wheel; 4. Then choose to move forward or backward, shift into R gear according to the reverse assist system display, and adjust the position to park the car. Note: Automatic parking means the car parks itself without manual control, and different automatic parking systems use different methods to detect objects around the car.

14

2

Share

What brand is the Mustang T80 transmission?

The Mustang T80's transmission is manufactured by SAIC Motor. The vehicle is equipped with a 5-speed manual transmission and a 6-speed wet dual-clutch transmission, paired with 1.5T and 2.0T engines. Detailed specifications are as follows: 1. The 5-speed manual transmission consists of gears 1-5 plus a reverse gear. The manufacturing technology for 5-speed transmissions is relatively mature, widely used, easy to maintain, and cost-effective. 2. The 6-speed wet dual-clutch transmission includes gears 1-6 plus a reverse gear. Structurally, the gears in a 6-speed transmission are more densely arranged. In terms of shifting speed, the 6-speed transmission has smaller speed intervals during gear changes.

16

0

Share

What is the purpose of the S mode?

How much does the Geely Boyue weigh?

How to Add Windshield Washer Fluid to the Leiling?

What is the oil specification for the Sylphy?

How to reset the tire pressure light on Volkswagen CC?

How to Operate the Mercedes-Benz Autonomous Parking System?

What brand is the Mustang T80 transmission?

How many cylinders does the Infiniti Q50L have?

What transmission is used in the Changan Raeton CC?

Skoda Octavia Maintenance Schedule

What is the ground clearance of the Cadillac XT5?