What is the purpose of the P gear in an automatic transmission car?

1 Answers
Tyrone
07/30/25 6:39am
Automatic transmission P gear is used for parking. Here are the relevant introductions: 1. P gear P gear: parking, parking gear (parking gear), used when parking, traditional vehicles have gear meshing, and the vehicle will not slide. 2. Precautions Parking gear - Parking, similar to the mutual jamming between the transmission and the engine. If forced to move (such as being towed), it may be damaged, which is why some tow trucks tow the front wheels (front-wheel drive), some tow the rear wheels (rear-wheel drive), and some need to lift the entire vehicle off the ground (four-wheel drive vehicles).
Was this review help?
6
4
Share
More Forum Discussions

What engine does the Geely Vision X6 have?

Vision X6 is a four-cylinder engine. Introduction to Vision X6: Dimensions are 4500mm in length, 1834mm in width, and 1707mm in height, with a wheelbase of 2661mm. The Vision X6 features added LED daytime running lights and a 360-degree panoramic imaging system, along with larger-sized wheels and a new taillight design. Vision X6 Powertrain: Equipped with two engine options: a 1.3T and a 1.8L. The 1.3T model delivers a maximum output of 133 horsepower. For transmission, the 1.3T engine is paired with a CVT gearbox, while the 1.8L engine comes with a 5-speed manual transmission.
11
4
Share

What is the reason why the Geely Emgrand GL cannot play music after Bluetooth connection?

It may be due to a malfunction in the car's Bluetooth module or the mobile device moving out of the communication range of the car's Bluetooth. Troubleshooting: You can reset the car system to factory settings, clear the Bluetooth list, turn off other Bluetooth devices, and then pair the mobile device with the car system via Bluetooth. Solution: Enable the Bluetooth settings on your phone, where you can find an option for open detection. Turn this option on. If this option is turned off, even if Bluetooth is enabled on the phone, it may not work because some car Bluetooth systems require matching codes for pairing.
6
2
Share

What is the normal tire pressure for BMW G28?

The normal tire pressure for BMW G28 ranges from 2.2 to 2.5 bar. Tire pressure refers to the air pressure inside the tires, and its level plays a crucial role in the performance and power of the vehicle. Maintaining the correct tire pressure ensures the proper functioning of the car during use. Abnormal tire pressure can lead to irregular driving conditions. If the tire pressure is too high, the contact area between the tire and the ground decreases, increasing the pressure per unit area on the tire. Driving on rough roads with high tire pressure can raise the risk of tire blowouts due to road protrusions, compromising driving safety. Conversely, if the tire pressure is too low, the contact area with the ground increases, causing the tires to generate excessive heat during driving. Prolonged driving with low tire pressure can result in deformation of the tire's inner side, shortening the tire's lifespan and increasing fuel consumption.
12
2
Share

What does the EPC light on the dashboard of Volkswagen Lavida mean?

EPC indicator light staying on indicates a fault in the engine or electronic system. If the light remains illuminated or flashes after ignition or during driving, it means the management system has detected a fault in the engine or electronic system. When a sensor fails or detects an abnormal condition, the control system will take corresponding measures according to the preset program. For example: when we are accelerating, the control unit detects that the throttle is in the open position. At this time, due to a fault in the brake light switch itself, the control unit receives a brake signal from the brake light switch. According to the program, the control unit will reduce the fuel injection time and decrease the engine power output. However, the control unit also receives an acceleration request signal from the throttle, and the computer considers these two signals contradictory. When the control unit cannot accurately determine the cause of the fault, it will first illuminate the EPC light to alert the user to check. In this sense, the EPC light is somewhat similar to a fault indicator light or the engine "check" light more commonly seen in American cars. The EPC indicator light is relatively common in Volkswagen vehicles. After turning the ignition key, the vehicle begins self-checking, and the EPC light will illuminate for a few seconds before turning off. If the light does not go off after the vehicle starts, it indicates a fault in the vehicle's mechanical and electronic systems. Generally, there are two possible reasons for the EPC light to come on. One is that the throttle is dirty and needs cleaning. The other situation is that the brake lights are not working, requiring inspection of the brake switch and wiring. Additionally, due to fuel quality issues, the EPC fault light may also illuminate. Generally, if the EPC light comes on in a Volkswagen vehicle, it indicates a problem, and it is recommended to go to a 4S store for inspection as soon as possible.
4
3
Share

Why hasn't the Odyssey undergone a model change?

No competition, this is the reason why Odyssey only gets facelifts instead of full model changes. Odyssey performance introduction: Since its debut in 1994, the Odyssey has achieved both "spacious interior" and "excellent driving performance" through Honda's unique ultra-low floor technology. Odyssey positioning introduction: Honda considers the Odyssey to be one level below Toyota's Alphard. Meanwhile, unlike in Japan where the Odyssey lacks direct competitors, in the increasingly competitive Chinese 7-seater SUV market, it needs to further enhance its competitiveness. The Odyssey's exterior designer Morioka referenced China-exclusive model Dongfeng Honda Elysion. The Elysion is positioned higher than the Odyssey, hence it uses larger chrome decorations on the front grille.
12
1
Share

Repair Method for Scirocco P2015 Trouble Code?

Scirocco P2015 trouble code can be repaired. Introduction to P2015 trouble code: It refers to the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1). When this fault occurs, first check the intake manifold flap position sensor, intake manifold flap solenoid valve and their circuits. Additionally, it is necessary to inspect whether the flap solenoid valve of the sensor is leaking. Causes of this fault: Intake manifold flap position sensor and circuit failure, intake manifold flap conversion vacuum tank damage, intake manifold flap electronic valve and its circuit failure, intake manifold flap mechanical failure, ECU and intake manifold flap sensor mismatch, vacuum line leakage, engine control unit damage, etc.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.