What is the purpose of the Mercedes-Benz trunk battery?

1 Answers
SophiaDella
07/30/25 10:03am
In high-end cars, the battery is usually located in the trunk, such as in Mercedes-Benz and BMW models. These batteries are typically maintenance-free and serve the purpose of starting the vehicle. The reasons for placing the battery in the trunk include: The engines in high-end cars are generally larger, and fitting the battery into the engine compartment might be too cramped. Additionally, the high temperatures in the engine compartment can shorten the battery's lifespan. Another reason is safety. The functions of a car battery include:
Was this review help?
14
5
Share
More Forum Discussions

How to Delete Dash Cam Footage?

Methods to delete dash cam footage: 1. Some dash cams have removable memory cards. You can remove the memory card and use a card reader to access the data on a computer, then perform the deletion; 2. Some dash cams have built-in, non-removable memory cards, but they come with a file management function. You can use the buttons to navigate to the file management section and delete the recordings. Dash cams record daily driving activities, and the recorded videos can serve as evidence in case of accidents or disputes. They can also be used to counter fraudulent claims, avoiding unnecessary troubles and losses, thereby protecting the driver's interests and rights.
3
5
Share

How long does it take to repair scratched car paint?

Repairing scratched car paint takes about 3 to 4 hours. The repair method is as follows: 1. Thoroughly clean the surface to be repaired before starting; 2. Use alcohol to remove wax, moisture, oil, and rust from the area to enhance paint adhesion; 3. Shake the touch-up paint pen vigorously before use, hearing the mixing ball rattle for at least 30 times; 4. Open the cap of the touch-up paint pen while it is upright to prevent spillage; 5. For deeper scratches, apply repeatedly with a brush; 6. The repaired area may appear uneven after direct application. Once the paint is dry, use 2000-grit wet sandpaper to smooth it until the surface is level with the surrounding area.
15
0
Share

What are the reasons for the reverse camera not displaying when shifting to reverse gear?

There are many reasons why the reverse camera does not display when shifting to reverse gear, mainly including poor contact in the wiring and switch, malfunction of the reverse camera module, and a dead car battery. Below is a detailed explanation: Poor contact in the reverse camera wiring and switch: If the connection wire between the camera and the car display screen comes loose, or if the reverse camera switch is damaged, it will cause the reverse camera not to display. In this case, the wiring needs to be reconnected, and if necessary, a new switch can be replaced. Malfunction of the reverse camera module: There are many reasons for the reverse camera module to malfunction, including system disorder, garbled module, and formatting of the reverse camera. In this case, it is necessary to visit a repair shop and have a professional inspect it. Dead car battery: The display screen of the car reverse camera is powered by the car battery. When the car battery is dead, the reverse camera will not display. In this case, the car battery should be charged promptly.
7
3
Share

Can a Car Still Be Driven After Being Submerged in Water?

Whether a car can still be driven after being submerged in water depends on the water level and the extent of submersion. Related details are as follows: Definition of a Water-Damaged Car: If the water level does not reach the chassis, it is not considered a water-damaged car. If the water reaches the chassis, it is classified as a soaked car, which is the mildest form of water damage. If the water level is almost above the wheels, it is a half-submerged car, where water enters the cabin and wets the seat cushions and lower parts. If the water level is above the dashboard, it is a fully submerged car. In fully submerged cars, the water reaches the waistline of the vehicle, causing corrosion to the electronic circuits, engine compartment, and interior. Although such cars can be repaired and used, they pose significant risks. Major Risks of Water-Damaged Cars: Electronic system failures; engine failures; automatic transmission damage; moldy interiors; other affected areas include the air conditioning, audio system, and interior lighting, which are also heavily impacted by water submersion.
5
4
Share

What Causes Bulges in Car Wheels?

Bulges in car wheels are caused by the breakage of the tire cord fabric layer in the sidewall, which allows the internal air to escape from the broken cords, resulting in the thin rubber supporting the bulge. The reasons for tire cord breakage are: 1. Wheel quality issues; 2. Impact to the wheel; 3. Insufficient tire pressure. A wheel consists of a rim and spokes. The rim is the component that mounts and supports the tire on the wheel, while the spokes are the supporting components between the axle and the rim. Tire maintenance methods include: 1. Regularly checking tire pressure; 2. Paying attention to tire wear indicators; 3. Noting the expiration date of tires; 4. Adhering to the schedule for four-wheel rotation.
12
4
Share

What is the problem when the car door cannot be closed gently?

The reasons why the car door cannot be closed gently are: 1. The hinge of the car door or the lock clip is displaced; 2. The lock tongue cannot reverse and latch securely; 3. The contact switch for door closure is damaged; 4. The installation height is insufficient, causing the door warning light to remain on even though the door is closed properly. Design requirements for car doors: 1. Ensure ease of passenger entry and exit, with the maximum opening angle controlled at 70 degrees; 2. No positional interference with other parts during the opening process; 3. The door must lock securely when closed and should not open by itself while driving; 4. The door mechanism should be easy to operate; 5. Good sealing performance is required; 6. A large transparent area is needed to meet lateral visibility requirements.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.