What is the purpose of the lead weights on wheels?

Is it okay to shift gears in an automatic car without starting it?

Shifting gears in an automatic car without starting it is not a problem. The correct steps for shifting gears are as follows: 1. Press the brake pedal, then press the one-touch start button; 2. Place the automatic gear lever in the D position to enter automatic mode; 3. Gently press the accelerator pedal, and the vehicle will slowly move forward. An automatic transmission typically refers to a car's automatic gear-shifting mechanism. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment of timing and gear-shifting operations. Generally, an automatic transmission car has six gear positions, from top to bottom: P, R, N, D, S, and L.

3

1

Share

What is the repair method for the middle door lock of a van?

The repair method for the middle door lock of a van is as follows: 1. Use a screwdriver to remove the screws fixing the panel and take off the panel; 2. Use a screwdriver to unscrew the screws of the protective cover and remove the protective cover; 3. Loosen and remove the screws fixing the lock cylinder in the side lock body cover plate; 4. Remove the lock cylinder and replace it with a super B-level wafer lock cylinder of the same size; 5. Tighten the screws of the protective cover and the screws fixing the lock cylinder in the side lock cylinder cover plate; 6. Tighten the screws fixing the panel. The central locking system refers to the switch located on the driver's door, which is a control device that can simultaneously control the closing and opening of all vehicle doors. When the driver locks the door next to them, the other doors are also locked simultaneously. The driver can open all doors simultaneously through the door lock switch or open a specific door individually.

2

4

Share

How to Solve Engine Oil Burning? What Parts Are Needed?

Engine oil burning can be addressed in the following ways: 1. If the engine burns oil when cold but operates normally after warming up, this phenomenon is caused by aging valve stem seals, and the required replacement part is the valve stem seal; 2. If the engine burns oil when hot, and blue smoke continues to be emitted from the exhaust pipe after the car reaches normal operating temperature, this indicates poor sealing of the piston rings, and the required replacement part is the piston ring. Engine oil burning refers to the situation where engine oil enters the combustion chamber of the engine and participates in combustion along with the air-fuel mixture. This phenomenon can lead to rapid damage of the oxygen sensor, increased carbon deposits in the combustion chamber, unstable idling, lack of acceleration power, increased fuel consumption, and excessive exhaust emissions. In severe cases, insufficient engine lubrication may cause irreparable damage or even complete failure of the engine.

12

1

Share

How to Solve the Problem of Uneven Door Height in a New Car?

To solve the problem of uneven door height in a new car, you can adjust the hinge connecting bolts to fine-tune the door. The car's cabin door is usually composed of an outer door panel, inner door panel, window frame, etc. The inner door panel serves as the mounting base for various accessories, including door hinges, glass and its regulator, door lock, door opening limiter, and positioning tongue. The door is installed on the car body shell via the door hinges. The design requirements for the door are: 1. Ensure ease of passenger entry and exit, with the maximum opening angle controlled to around 65 to 70 degrees; 2. Avoid positional interference with other parts during the opening process; 3. Ensure reliable locking when the door is closed, preventing it from opening while driving; 4. Provide good sealing performance; 5. Have a large transparent area to meet lateral visibility requirements; 6. Ensure sufficient strength and rigidity to guarantee reliable door operation, reduce door vibration, enhance side collision safety, and prevent door sagging.

16

3

Share

What Are the Solutions for Foul-Smelling Car Exhaust?

Solutions for foul-smelling car exhaust include: using gasoline detergent to clean carbon deposits and impurities from the entire fuel system, including the intake tract, intake valve, and combustion chamber. If the odor persists after cleaning the carbon deposits, the vehicle should undergo maintenance, with a focus on checking the oxygen sensor and its wiring, ECU faults, and the intake system. Causes of unpleasant car exhaust include: 1. Poor fuel quality: For example, gasoline containing too many impurities, heavy metals, or water can lead to foul-smelling exhaust emissions. 2. Incomplete combustion of the air-fuel mixture: Mainly due to an overly rich mixture, which can impair the purification capability of the catalytic converter. Car exhaust contains a large amount of harmful substances, including carbon monoxide, nitrogen oxides, hydrocarbons, and solid suspended particles. Purification measures such as catalysts or water washing can be employed.

3

4

Share

What are the requirements for changing from C2 to C1?

The requirements for changing from C2 to C1 are: 1. Hold a C2 driver's license for at least 1 year; 2. The driver's license has not been deducted 12 points in the previous scoring cycle. The application process for changing from C2 to C1 is: 1. Bring your ID card to the vehicle management office to apply for an additional driving license; 2. Fill out the application form and pay the fees; 3. Bring your ID card, C2 driver's license, six one-inch white background color photos, and a medical examination form to a local regular driving school to complete the registration. A C2 driver's license only allows you to drive small and micro automatic passenger cars, as well as light and micro automatic trucks. A C1 driver's license allows you to drive small and micro passenger cars, light and micro trucks, light, small, and micro special operation vehicles, and other models.

16

0

Share

What is the purpose of the lead weights on wheels?

Is it okay to shift gears in an automatic car without starting it?

What is the repair method for the middle door lock of a van?

How to Solve Engine Oil Burning? What Parts Are Needed?

How to Solve the Problem of Uneven Door Height in a New Car?

What Are the Solutions for Foul-Smelling Car Exhaust?

What are the requirements for changing from C2 to C1?

What is the comparison between Fit and Yaris L X?

Do You Need to Hold the Clutch When Stopping at a Red Light on a Motorcycle?

What is the fuel tank capacity of the Wuling Hongguang S 1.5L model?

How often should the coolant be replaced in an Atenza?