What is the purpose of the laser lights on highways?

1 Answers
Eugene
07/30/25 8:39am
Warning function. The green laser lights can prevent fatigue driving with their high brightness and long range. For drivers who drive for long periods at night, they effectively stimulate the brain to stay alert. Additional information is as follows: 1. Highways have fewer reference objects due to their flat and straight roads, leading to monotonous driving actions that can easily cause drowsiness, especially in summer. Green laser lights are set up to stimulate the senses through light. 2. After multiple inspections, traffic police have placed these lights in areas prone to fatigue driving, typically on relatively straight road sections. The brightness is adjusted to an appropriate level to create a visual impact without affecting the driver's vision. Laser lights come in two forms: constant-on and strobe. 3. In addition to laser lights, there are also flashing lights and reflective strips that serve anti-fatigue purposes, enhancing drivers' awareness and ensuring sufficient rest time to prevent traffic accidents.
Was this review help?
1
0
Share
More Forum Discussions

What to Do When the Smart Key Cannot Be Pulled Out?

Solutions for when the Smart car key cannot be pulled out: Try turning the steering wheel and then pulling the key; or clean the slot and re-shift the gear before pulling the key. Reasons why the key cannot be pulled out: 1. The gear is not fully engaged: Difficulty in pulling out the key after turning off the engine is common in automatic transmission models. This happens when the gear is not fully engaged in the P (Park) position. It may appear to be in place but does not trigger the electronic sensor, or there might be obstructions like coins in the gear slot preventing full engagement. In such cases, the owner should check for any obstructions in the gear slot, remove them, start the car, and re-shift the gear to ensure it is fully engaged. The key can then be pulled out. 2. Steering wheel lock: Another scenario is when the steering wheel cannot be turned and the key cannot be pulled out. This is often caused by the steering wheel lock, a common anti-theft feature. Although the steering wheel lock may seem primitive compared to most electronic anti-theft devices, it remains highly effective as it prevents the steering wheel from turning even if the car is started. To resolve this, gently try turning the steering wheel left and right while turning the key. This will release the steering wheel lock, allowing the key to be pulled out.
11
1
Share

What are the consequences of not handling overdue vehicle inspections under one's name?

Having overdue vehicle inspections under one's name affects the renewal and inspection of a driver's license upon expiration and also impacts the registration of newly purchased motor vehicles. Motor vehicles that fail to undergo safety technical inspections within the legally prescribed period will be subject to warnings or fines by the traffic management department of the public security authorities. Below is additional information: Methods for renewing overdue vehicle inspections: Vehicles with overdue inspections can undergo inspection again. However, before the inspection, the owner of the overdue vehicle must receive penalties from the traffic police department. Generally, penalties may vary slightly by region. After completing the penalties, the vehicle can enter the normal inspection process. Content of annual inspections: Check whether the vehicle has a user manual, certificate of conformity (for imported vehicles, the commodity inspection certificate), and whether the factory sample marks on the vehicle body are complete. Measure the external and internal dimensions of the motor vehicle, including wheelbase and axle track. Specific measurement items include vehicle length, width, height, cargo compartment panel height and area, wheelbase, axle track, etc. Conduct inspections item by item according to technical inspection standards. Upon passing, fill out the "Motor Vehicle Initial Inspection Alteration Registration Form" and record the unladen weight, load capacity, passenger capacity, and number of occupants in the driver's cabin as specified by the manufacturer.
7
3
Share

How to Adjust Self-Adjusting Brakes?

On the inner side of the pump, you can see a capped bleed screw. Turning it counterclockwise will cause oil to leak out. After letting it leak for a few seconds, tighten it again. Then, repeatedly press the brake pedal several times in the driver's compartment and hold it down. At this point, loosen the bleed screw again to let oil leak for a few seconds before tightening it. Repeat this process until the brake adjustment is complete. To adjust the drum brake on this wheel, there is a square hole used for brake adjustment. Use two screwdrivers: one to move the spring and the other to move the gear. However, this method of adjusting the brakes must be done with the brake drum cover in place.
9
1
Share

What is the correct operation method for downshifting?

Before upshifting, it is necessary to accelerate first (powering the vehicle). When the speed increases to a suitable level for the higher gear, promptly shift into the higher gear. When downshifting, only when the speed drops to a certain value can you shift into a lower gear. Ensure safety and good road conditions when using the higher gear suitable for this speed. Adjust the speed promptly according to road and traffic conditions. Avoid driving at low speed with high gear, as the detonation caused by lugging the engine can have adverse effects on both the engine and transmission.
9
2
Share

What is the fuel tank capacity of the 2021 Excelle?

The fuel tank capacity of the new Excelle is 44L, and the manufacturer recommends using 92-octane gasoline. After turning off the vehicle, do not lock it; simply press the side of the fuel tank cover to open it. Here are some related details: 1. Definition of the fuel tank: The fuel tank is a container for storing fuel, specifically designed to hold hydraulic oil or fluid in a hydraulic system. 2. Classification of fuel tanks: Fuel tanks can be divided into open-type and closed-type. The fuel tank used in automobiles must meet the volume requirements that match the vehicle's range. When refueling, it is necessary to add fuel to the lowest liquid level of the suction pipe and return pipe to prevent the formation of bubbles. 3. Precautions for refueling the Buick Excelle: Place the fuel nozzle correctly inside the fuel filler to avoid overflow, which could lead to fire and personal injury. After refueling, ensure the fuel tank cap is properly closed to prevent evaporation or overflow that could cause accidents. During refueling, turn off all electronic devices to avoid fire or more severe hazards. Do not create open flames while refueling to prevent fuel explosions.
4
0
Share

What is the installation method for the roof gutter rubber strip?

First, remove the old rubber strip, then use a utility knife and a flat-head screwdriver to thoroughly scrape off the old sealant inside the waterproof channel. Next, use sandpaper to remove any rust inside, clean the channel thoroughly, and then apply a new layer of sealant (apply to the bottom layer) — avoid using too much. Remember to apply a bit more sealant at the corners of the front and rear windshields. After that, install the new waterproof rubber strip. Allow it to sit for 2 hours before conducting a water leakage test by pouring some water onto the rubber strip to check for any leaks inside the vehicle.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.