What is the purpose of the green laser on highways?

1 Answers
WyattRose
07/29/25 4:02pm
The purpose of the green laser on highways is to remind drivers to stay alert and avoid fatigue driving. The green laser on highways is an anti-fatigue laser light, which has a long projection distance and is particularly noticeable at night. The laser light comes in two forms: continuous and strobe, with a range of 2 kilometers, effectively stimulating the driver's brain to prevent fatigue. The installation of anti-fatigue laser lights on highways can change the monotonous driving environment through variations in light, thereby reducing visual fatigue. After multiple on-site inspections and concentrated discussions, highway traffic police have placed the laser lights on relatively straight sections of the road that are prone to fatigue driving. The lasers are adjusted to ensure sufficient brightness while also providing a certain visual impact, effectively preventing driver fatigue.
Was this review help?
15
5
Share
More Forum Discussions

What are the symptoms of transmission failure in the Volkswagen Touran?

Transmission failures generally manifest in the following ways: 1. Difficulty in shifting gears and a sense of jerking: During startup or driving, shifting gears feels stiff and laborious, as if something is obstructing, accompanied by jerking, vibration, and a sense of hesitation. Sometimes, shifting gears is easier when the car is cold but difficult when the car is warm, causing significant discomfort. The reason is that the relevant gears and components inside the transmission do not receive sufficient lubrication, failing to form a durable lubricating film, which prevents the components from operating smoothly. 2. Automatic transmission jerking and impact sensation: The car lacks power during startup, and there is noticeable jerking and hesitation at low or medium speeds, accompanied by fluctuations in the tachometer needle on the dashboard. When the accelerator pedal is pressed hard during medium to high-speed driving, the car slips, the tachometer needle rises rapidly, and there is a distinct impact sensation. Shifting from P to R or D gear results in a noticeable impact sensation and jerking. The cause is the presence of impurities inside the transmission, forming blockages in the valve body, hindering its smooth movement and preventing proper regulation of oil pressure, leading to jerking and shifting impact issues. 3. Transmission noise and loud sounds: During idling, driving, or high-load driving, abnormal noises or even loud sounds are heard from the transmission, along with irregular, dull sounds during gear shifting. The reason is contamination inside the transmission, wear or severe wear of bearings, gears, or other components, or damage to the gear sides.
20
2
Share

What is the wiper size for the Lexus IS300?

The wiper size for the Lexus IS300 is left side (long): 24 inches/600mm, right side (short): 19 inches/475mm. Below is a detailed introduction about car wipers: 1. Overview: Wipers are important accessories installed on the windshield, designed to remove rain, snow, and dust that obstruct the view on the windshield. They play a crucial role in driving safety. Wipers can generally be categorized into vacuum wipers, electric wipers, and wipers with electronic control units. 2. Components: Electric windshield wipers typically consist of a wiper arm, wiper blade assembly, rubber blade, blade holder, blade support, wiper arm spindle, wiper base plate, motor, reduction gear, drive linkage, drive link hinge, wiper switch, and wiper switch knob.
20
3
Share

What is the actual fuel consumption of the Tang DMI?

The comprehensive fuel consumption of the Tang DM is 9L/100km. The above is the NEDC comprehensive fuel consumption, which is the data of comprehensive working condition fuel consumption measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.1-6.6L/100km. The level of car fuel consumption is directly related to five major factors, namely driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that will increase car fuel consumption are as follows: Driving habits: Rough driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement consume more fuel than those with smaller displacement because larger displacement generally means greater power, requiring more gasoline to burn and perform work. Cars with greater self-weight will have higher fuel consumption because greater self-weight requires more driving torque. Road conditions: Dirt roads, muddy roads, soft surfaces, mountain roads, etc. Driving on these surfaces increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts is not easy to atomize, requiring more gasoline to be injected for combustion, increasing fuel consumption. At the same time, low temperatures will cause the engine computer to control the car to warm up at higher speeds, which will also increase fuel consumption.
18
3
Share

What is the diameter of a 17-inch wheel hub in centimeters?

The diameter of a 17-inch wheel hub is 43.18 centimeters, as 1 inch equals 2.54 centimeters. Below is additional information about tires: 1. Tire radius and the tires compatible with the wheel hub: The tire radius depends on the tires compatible with the wheel hub. For example, a tire with the specification 205/65R16 has a width of 205 mm (contact width with the ground), a 65% aspect ratio (i.e., the sidewall height is 65% of the tire width), and a 16-inch wheel hub. The tire diameter is calculated as twice the sidewall height plus the wheel hub diameter. With a sidewall height of 13.325 cm, the tire diameter is 67.29 cm. 2. Tire size range for different vehicle types: Small cars with engine displacements between 0.8-1.5 liters typically use front tires in the range of 155/65R1373T to 175/70R1477H. Large cars with engine displacements between 1.6-6.0 liters generally use tires in the range of 185/60R14 to 245/50R18. 3. Types of tires: Internationally standardized tire codes represent the section width in millimeters and the aspect ratio as a percentage. These are followed by: tire type code, rim diameter (in inches), load index (maximum load capacity code), and speed rating. For example, in 175/70R1477H, 175 indicates a tire width of 175 mm, 70 means the aspect ratio is 70% (sidewall height is 70% of the width), the rim diameter is 14 inches, the load index is 77, and the speed rating is H.
12
2
Share

Can vehicle annual inspection be conducted in a different location?

Vehicle annual inspection can be conducted in a different location. Currently, cross-province off-site inspections for small cars, trucks, and medium-sized buses have been fully implemented. This means applicants can directly undergo inspections and obtain inspection qualification marks in cities other than the vehicle's registration location. However, it is important to note that large passenger buses and school buses cannot be inspected off-site and must return to the vehicle's registration location for inspection. Off-site vehicle annual inspections are divided into within-province and cross-province inspections. The procedures for within-province off-site inspections are the same as local inspections, while for cross-province off-site inspections, the vehicle owner must return to the vehicle's registration location to apply for an off-site inspection authorization before undergoing the annual inspection at the vehicle's usage location.
2
1
Share

Why is the seventh-generation Teana called Altima?

In 2018, the seventh-generation Teana was unveiled at the New York Auto Show, and its English name was also changed to the American version of Teana. Here is some related knowledge about the Teana: 1. Exterior: The 2019 Teana features a brand-new design language. The front grille adopts a trapezoidal design with a large area, surrounded by a thick chrome trim that connects the headlights on both sides, giving it a strong sense of unity and high recognition. 2. Interior: The interior design leans more towards a youthful style, emphasizing simplicity. The functional areas in the center console are clearly defined, with well-arranged line designs. The steering wheel features a three-spoke flat-bottom design with good size and texture. The full LCD instrument panel paired with the central control screen enhances the technological feel of the interior.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.