What is the purpose of the front armrest on the passenger side of the Mercedes-Benz G-Class?

1 Answers
DanteFitz
07/29/25 11:30pm
The front armrest on the passenger side of the Mercedes-Benz G-Class is designed to provide support for the passenger seated in the front. Here is some information about Mercedes-Benz vehicles: 1. Introduction to Mercedes-Benz: Mercedes-Benz (a German luxury car brand) generally refers to Mercedes-Benz. Mercedes-Benz is a world-renowned luxury automobile brand. 2. Brand history of Mercedes-Benz: Mercedes-Benz is a top-tier luxury automobile brand globally, considered one of the most premium car brands in the world. It is admired for its perfect technical standards, rigorous quality benchmarks, innovative capabilities, and a series of classic coupe models.
Was this review help?
15
2
Share
More Forum Discussions

What are the reasons for a van's radiator boiling over?

The reasons for a van's radiator boiling over are: 1. Insufficient water level; 2. Radiator blockage causing poor circulation and backflow; 3. Radiator leakage obstructing water circulation; 4. Abnormal operation of the thermostat's large and small circulation conversion; 5. Damaged cooling fan or short circuit causing fan failure or very slow fan speed; 6. Issues with the fan water temperature sensor. Solutions for a van's radiator boiling over: 1. When the vehicle experiences radiator boiling, promptly pull over to a safe area, keep the engine idling for 3 to 5 minutes, then turn off the engine and open the hood for cooling after the situation eases; 2. After the engine cools, open the radiator cap, replenish the coolant, and drive the vehicle for inspection to troubleshoot the issue.
1
3
Share

How to Open the Door with the Key for Buick Envision?

Buick Envision's method of opening the door with the key is as follows: 1. Locate a small hole under the driver's side door handle; 2. Pull out the physical key from the fob; 3. Insert the physical key into the small hole below; 4. Pry upwards with the key to remove the decorative cover; 5. Remove the outer decorative cover; 6. Insert the key into the keyhole on the door handle; 7. Turn the key to unlock the door. The Buick Envision is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169 PS, maximum torque of 250 Nm, maximum power of 124 kW, maximum power speed of 5600 rpm, and maximum torque range between 1700 to 4400 rpm. It is paired with a dual-clutch transmission.
6
0
Share

What is the replacement method for the H6 air conditioning filter?

H6 air conditioning filter replacement method is: 1. Open the glove box cover, locate the fixing buckle on the right side of the glove box, and pull it outward forcefully to remove the glove box; 2. Press the fixing buckles on both sides of the cover plate firmly to remove the cover plate; 3. Pull out the old air conditioning filter to the outside, and install the new air conditioning filter. The H6 is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum horsepower of 150ps, a maximum torque of 210Nm, a maximum power of 110kW, a maximum power speed of 5600rpm, a maximum torque speed range of 1800 to 4400rpm, and is paired with a 6-speed manual transmission.
13
1
Share

How to Open a Sagitar Car Key?

The method to open a Sagitar car key is as follows: 1. Press the button at the top left corner of the key, use a tool to fix it at the black mark from the edge side; 2. Use pliers to pry open from the side of the key, and the key cover can be removed. The Sagitar's body dimensions are: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, minimum ground clearance 135mm, and body weight 1355kg. The Sagitar is equipped with a 1.2T inline 4-cylinder turbocharged engine, with a maximum horsepower of 116PS, maximum torque of 175Nm, maximum power of 85kW, maximum power speed of 5000rpm, maximum torque speed range of 1400 to 4500rpm, and is paired with a 5-speed manual transmission.
15
5
Share

Does the Nissan Teana ignition coil have a fuse?

Nissan Teana ignition coil does not have a fuse. The steps to replace the ignition coil are: 1. Open the ignition coil cover on top of the engine; 2. Use a pentagon wrench to remove the ignition coil fixing screws; 3. Disconnect the ignition coil power plug; 4. Use a screwdriver to gently pry it up and remove the ignition coil; 5. Install the new ignition coil and tighten the screws; 6. After connecting the power plug, cover the top cover. The Nissan Teana is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum horsepower of 156ps, a maximum torque of 197nm, a maximum power of 115kw, a maximum power speed of 6000rpm, a maximum torque speed of 4400rpm, and is matched with a continuously variable transmission (CVT).
19
3
Share

When to Add Antifreeze?

Antifreeze should be added when the fluid level falls below the MIN mark. When replacing antifreeze, it is advisable to use the same brand, as different brands may have varying production formulas. Mixing different brands could lead to chemical reactions between additives, potentially rendering them ineffective. Prolonged failure to replace antifreeze can degrade its quality, reducing its anti-corrosion properties and damaging the radiator and pipes. It can also affect the boiling and freezing points, compromising the antifreeze or cooling performance. Do not wait until the antifreeze turns black to replace it, as this indicates severe deterioration and significant scale buildup, which may have already damaged the pipes.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.