What is the purpose of the collision prevention emergency braking in the Range Rover?

What faults will occur if the gasoline pump pressure is insufficient?

Insufficient fuel pressure will cause the vehicle to accelerate weakly or even shake and stall. At the same time, if the fuel pressure cannot be maintained, it will result in the engine failing to start on the first attempt. The fuel pump requires a power source to operate, and the lower camshaft is driven by the engine crankshaft gear. The main reasons for insufficient gasoline pump pressure are: 1. Reason one: The oil seal at the rear end of the fuel pump drive gear shaft is worn or the pipeline joint is not tight, allowing air to enter the pipeline; the fuel tank is low on fuel, and the filter is dirty. 2. Reason two: The end face bearing of the fuel pump gear is worn or stuck, causing excessive axial clearance in the fuel pump gear. 3. Reason three: The needle bearing is damaged, causing abnormal meshing of the fuel pump gear, and the inner cavity of the fuel pump housing is scratched.

12

2

Share

Can Yellow Spots Be Removed at a Car Wash?

Yes, they can be removed. The details are as follows: 1. Dust and impurities When a car is driven in a dusty area, dust and impurities can accumulate on the white paint surface. Some impurities are particularly stubborn and cannot be removed with regular cleaning, such as asphalt and bird droppings. These sticky impurities require special cleaning agents for soaking, stain removal, and rinsing to be completely eliminated. 2. Paint surface aging If the car paint is exposed to prolonged sun and rain without timely care, it can easily age, forming spots on the surface. Some cars left parked for too long or exposed to acid rain may even suffer severe corrosion. In such cases, the paint surface needs to undergo a restoration process, which involves using polishing wax to grind and polish the damaged paint.

4

2

Share

Is It Normal for the Letter P with Three Slashes Light to Stay On in the Car?

The letter P with three slashes light staying on in the car is a normal phenomenon. The letter P with three slashes light indicates the reverse radar, and when it is on, it means the reverse radar is activated. The technical name for the reverse radar is the reverse collision avoidance radar. It works by emitting ultrasonic waves through radar probes to calculate the distance to obstacles, and then alerts the driver with different frequency alarms based on the distance, helping the driver better control parking orientation. The function of the reverse radar: The reverse radar is a safety assistance device when the car is parked or reversing. It can inform the driver about surrounding obstacles through sound or more intuitive displays, eliminating the troubles caused by the driver looking around when parking, reversing, or starting the vehicle, and helping the driver overcome blind spots and unclear vision. The reverse radar mainly consists of ultrasonic sensors, a controller, and a display or buzzer. Ultrasonic sensors: Their main function is to emit and receive ultrasonic signals, then input the signals into the main unit, which displays them through display devices. Controller: It processes the signals and calculates the distance and orientation between the car body and obstacles. Display or buzzer: When the sensors detect that the car is at a dangerous distance from an obstacle, the system alerts the driver through the display and buzzer.

1

5

Share

Can Compulsory Traffic Insurance Be Transferred to a New Car?

No, because compulsory traffic insurance is a mandatory national insurance. Here are the specific details: 1. Compulsory Insurance: According to the "Regulations on Compulsory Traffic Accident Liability Insurance for Motor Vehicles," each motor vehicle is limited to one compulsory insurance policy. Except for cases where the vehicle is scrapped, deregistered, or officially reported as lost by the public security authorities, the insurance cannot be canceled. In the event of vehicle transfer or ownership change, the compulsory insurance can only be transferred along with the original vehicle and cannot be transferred to a new car with the license plate. After purchasing a new car, you need to buy compulsory insurance again. 2. Purchasing Compulsory Insurance: Bring the owner's ID card, vehicle technical parameter sheet, and purchase invoice (for company vehicles, the organization code certificate is also required) to the business offices or agency points of major insurance companies to purchase compulsory insurance.

19

1

Share

Is Audi's fuel consumption high?

Audi's fuel consumption is at a medium level, which is largely related to the driving conditions and habits. Impact of driving conditions on fuel consumption: Fuel consumption varies significantly when driving under different conditions (city or highway). Certain vehicle conditions (frequent heavy loads, short-distance driving, insufficient tire pressure, etc.) can increase fuel consumption. Impact of driving habits on fuel consumption: It is highly related to the driver's habits. Aggressive driving can lead to very high fuel consumption, while a more moderate driving style can result in relatively lower fuel consumption. Improving driving conditions and habits can effectively reduce fuel consumption. Regular maintenance at an Audi 4S store ensures all vehicle systems are in optimal working condition.

8

3

Share

Why does the brake make a creaking sound on snowy days?

This is the sound produced when the ABS system is in operation, which is a normal phenomenon. Below is a detailed introduction to the ABS system: 1. When driving on icy or snowy roads, the friction between the tires and the road surface is relatively low. In such conditions, applying the brakes can easily activate the ABS system. ABS stands for Anti-lock Braking System, and almost all household vehicles are equipped with this system. The ABS system prevents the wheels from locking up during emergency braking. If the wheels lock up during emergency braking, the driver will not be able to control the vehicle's trajectory through the steering wheel, leading to a loss of control. If the ABS system is activated during emergency braking, the driver can slow down while maintaining control of the vehicle's direction. 2. In normal situations when braking in an emergency, if your vehicle is equipped with an ABS system, the correct method is to press the brake pedal firmly all the way down. Some drivers tend to pump the brakes in emergencies, which will not activate the ABS system. In an emergency, pressing the brake pedal firmly and completely will trigger the ABS system.

5

0

Share

What is the purpose of the collision prevention emergency braking in the Range Rover?

What faults will occur if the gasoline pump pressure is insufficient?

Can Yellow Spots Be Removed at a Car Wash?

Is It Normal for the Letter P with Three Slashes Light to Stay On in the Car?

Can Compulsory Traffic Insurance Be Transferred to a New Car?

Is Audi's fuel consumption high?

Why does the brake make a creaking sound on snowy days?

Reasons for the blockage of the particulate filter in the Audi Q3

What does tilt up mean in a car?

Why is the Honda CR-V called the Siwei brand?

How to Turn Off the Circle Slash on the Dashboard?