What is the purpose of recycling automotive three-way catalytic converters?

What Needs to Be Replaced During Car Maintenance?

Car maintenance requires the replacement of engine oil, oil filter, antifreeze, windshield washer fluid, cabin air filter, brake fluid, and transmission fluid. Below is relevant information: 1. Purpose of maintenance: To keep the vehicle clean and in proper technical condition, eliminate potential hazards, prevent malfunctions, slow down the deterioration process, and extend the service life. 2. Benefits of maintenance: Ensures the vehicle maintains excellent performance; improves vehicle efficiency, reduces wear on parts and tires, and enhances driving safety; decreases noise and environmental pollution; keeps the vehicle exterior clean and prevents damage.

5

2

Share

How to Clean Dirt on the Radiator?

You can use a radiator cleaner to perform the cleaning. The specific steps are as follows: 1. Park the vehicle and turn off the engine. Wait for the coolant temperature to drop, then open the expansion tank and add the radiator cleaner; 2. Start the engine and let it idle for 5-10 minutes after the cooling fan activates; 3. Turn off the engine and remove the front bumper. Ensure all fastening screws are loosened before slowly detaching it from both ends toward the center, being careful not to break the clips; 4. Once the coolant has completely cooled, drain the radiator cleaner along with the old coolant, then refill with new engine coolant.

9

3

Share

How to Lock the Trunk of Roewe i5?

To lock the trunk of the Roewe i5, close the trunk lid and then lock the car using the central locking system. This will successfully lock the trunk. Once the central locking is engaged, the trunk lid cannot be opened. Additionally, ensure that the trunk lid is securely closed before attempting to lock it, otherwise, the trunk lid cannot be locked. Relevant information about the Roewe i5 is as follows: 1. Exterior Design: Features the Roewe family's rhythmic floating wing wide-body grille design, paired with rectangular front headlight clusters. In terms of dimensions, the car measures 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. 2. Powertrain: The Roewe i5 is equipped with either a 1.5L naturally aspirated engine or a 1.5T turbocharged engine, delivering maximum power outputs of 120Ps and 169Ps, and maximum torque outputs of 150N·m and 250N·m, respectively. 3. Transmission: The 1.5L engine is paired with a CVT advanced continuously variable transmission, while the 1.5T engine is matched with a 7-speed TST intelligent dual-clutch transmission.

1

0

Share

Which is more suitable for a new car: coating or crystal coating?

New cars are more suitable for crystal coating. Here is the relevant content introduction: 1. Crystal coating provides reliable paint surface sealing technology for car paint, offering efficient and long-lasting protection to prevent environmental impacts on the paint color. 2. The method of crystal coating is as follows: (1) Conduct a comprehensive and detailed inspection of the vehicle for any scratches or paint peeling. Wash the car with neutral car shampoo in the order from front to back and top to bottom, and carefully wipe the body with a soft towel. (2) After repeatedly kneading the clay, place it in the palm of your hand and move it horizontally back and forth on the paint surface with water, using adhesive tape to protect different parts of the car body. (3) Depending on the actual condition of the paint surface, select an appropriate polishing compound for polishing, rinse the entire car carefully with water, and dry the paint surface with an absorbent towel and an efficient dry cleaning gun. (4) Use a special degreasing solution to degrease the paint surface, while cleaning and caring for the paint surface condition, edges, door edges, engine compartment, car glass, and tires. (5) Confirm that the entire vehicle's construction is completed without errors.

13

4

Share

Is License Retention Credible?

License retention is not credible; it's just a pretext for recruitment. The full name of a driver's license is a motor vehicle driving license, also known as a 'driver's license,' which is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills, and those lacking such skills may cause traffic accidents if they drive recklessly. Generally, people cannot drive on the road without a license. Below are the classifications of driver's licenses: A1 License: Can drive large buses and A3, B1, B2, C1, C2, C3, C4, M. A2 License: Can drive tractors and B1, B2, C1, C2, C3, C4, M. A3 License: Can drive city buses and C1, C2, C3, C4. B1 License: Can drive medium-sized buses and C1, C2, C3, C4, M (medium-sized buses refer to those with fewer than 19 seats, such as minibuses and vans).

11

4

Share

What to Do When the Car Hood Won't Open?

Solutions for when the car hood won't open are as follows: 1. There is a hood button under the car's steering wheel. Pulling it usually loosens the hood. Lift the hood, reach inside, and flip a mechanical latch to open it. 2. Crawl under the car and use a wire to reach the hood lock hole from below the engine to release the front hood. Below are the functions of the hood: 1. Airflow guidance. For objects moving at high speed through air, the air resistance and turbulence generated around them directly affect their trajectory and speed. The hood's shape can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the car. Through guidance, air resistance can be decomposed into beneficial forces, increasing the front wheels' grip on the ground and enhancing driving stability. 2. Protection for the engine and surrounding components. Under the hood are critical parts of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system. Enhancing the hood's strength and structure can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle's proper operation. 3. During driving, the driver's front visibility and natural light reflection are crucial for correctly judging road conditions. The hood's shape can effectively adjust the direction and form of reflected light, reducing its impact on the driver. 4. The engine operates in a high-temperature, high-pressure, and flammable environment, risking explosions, fires, or leaks due to overheating or component failure. The hood can effectively block damage from explosions, acting as a protective shield.

8

5

Share

What is the purpose of recycling automotive three-way catalytic converters?

What Needs to Be Replaced During Car Maintenance?

How to Clean Dirt on the Radiator?

How to Lock the Trunk of Roewe i5?

Which is more suitable for a new car: coating or crystal coating?

Is License Retention Credible?

What to Do When the Car Hood Won't Open?

What are the symptoms of a damaged front wheel shock absorber top mount?

How to Remove the Steering Wheel of the New Passat?

What is the difference between an automatic transmission and a tiptronic transmission?

Does the Elantra have headlight washers?