What is the purpose of new energy vehicles?

2 Answers
McJack
07/30/25 12:55am
New energy vehicles use unconventional vehicle fuels as their power source. The following is a relevant introduction about new energy vehicles: 1. Concept: New energy vehicles refer to vehicles that use unconventional vehicle fuels as their power source (or use conventional vehicle fuels with new onboard power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. 2. Features: Hybrid vehicles have three arrangement forms: series, parallel, and hybrid. Series arrangement means the engine drives the generator to produce electricity, which is then directly transmitted to the motor through the motor controller, generating electromagnetic torque to drive the vehicle.
Was this review help?
7
4
Share
MacLawson
08/15/25 6:22am
I've been into cars for many years. New energy vehicles, to put it simply, replace traditional gasoline engines with batteries or electric drives, mainly aiming for energy efficiency and environmental protection. Gasoline cars emit exhaust fumes daily, polluting the air, and in cities, the exhaust is so thick you can barely see the road. These cars produce zero emissions, completely clean. I've driven electric cars myself and found the driving experience very comfortable—quick acceleration, no noise, and no fatigue even on long trips. Charging has seen significant improvements; installing a charger at home means waking up to a full battery, saving the hassle of queuing at gas stations. Technologically, battery costs are dropping, and recycling reduces electronic waste. Overall, it helps individuals save money and reduce pollution while cutting carbon emissions for the planet, promoting sustainable transportation. In the future, integrating solar panels could enable cars to self-charge, making them even more efficient.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Corolla 1.2T per 100 kilometers?

The combined fuel consumption of the Corolla 1.2T is 5.5-5.6L/100km. There are currently 4 models of the Corolla 1.2T available for sale. The Pioneer PLUS version has a fuel consumption of 5.5L/100km, while the Elite PLUS, Flagship, and Luxury versions have a fuel consumption of 5.6L/100km. The above figures are the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for comprehensive driving conditions. The actual fuel consumption is higher than this value, ranging from 5.5-10.5L/100km. Specific factors affecting a car's fuel consumption are as follows: Vehicle weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of around 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV weighing around 1.5 tons has a fuel consumption of about 8.5 liters. Different weights result in varying fuel consumption. Drag coefficient: Higher drag increases fuel consumption during driving. Cars with better aerodynamics have lower drag coefficients, resulting in lower fuel consumption. Economical RPM: The engine has an optimal torque output point during driving. Maintaining the car's speed within this torque output range significantly reduces fuel consumption. Generally, small-displacement cars achieve this at around 70 km/h, while larger-displacement cars reach it at about 100 km/h. Staying within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption.
10
3
Share

What Does Automatic Cruise Control Mean?

Once a car is set to cruise mode, the engine's fuel supply is controlled by the computer. The computer continuously adjusts the fuel supply based on road conditions and the vehicle's driving resistance to maintain the set speed without the need to operate the throttle. Here is an introduction to cruise control: 1. Function: After setting the desired speed and switching it on, the vehicle automatically maintains the speed without the driver needing to press the accelerator pedal, allowing the car to travel at a fixed speed. 2. Introduction: Cruise control, also known as speed control system or autonomous driving system. 3. Features: With advancements in automotive technology, more and more cable-type throttle control methods are being quickly replaced by electronic throttle control methods. Cable-type cruise control mainly consists of a control switch, control unit (cruise computer), and servo (mechanical actuator).
18
3
Share

What to Do When Unable to Identify the Responsible Party for Vehicle Damage?

Insurance contracts do not stipulate that the insurer can be exempted from liability in cases where a third party cannot be identified. On the contrary, insurance contracts explicitly state that even if the third-party responsible for the incident is not found, if it is determined that a third party should be held accountable, the insurance company may apply a 30% absolute deductible. Below is an introduction to vehicle insurance: 1. Overview: Vehicle insurance (also known as motor vehicle insurance or auto insurance, referred to as car insurance) is a type of property insurance. It covers the vehicle itself and third-party liability, providing compensation for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. 2. Classification: Vehicle insurance can be specifically divided into commercial insurance and compulsory traffic insurance. Commercial insurance further includes primary vehicle insurance and additional coverage. 3. Clients: The primary clients of vehicle insurance are legal entities and individuals who own various types of motor vehicles.
5
0
Share

What is the fuel tank capacity of the Vito?

The fuel tank capacity of the Mercedes-Benz Vito is 75 liters. Below is an introduction to related content about Mercedes-Benz: 1. Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing a safety hazard. 2. Mercedes-Benz: A German automotive brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automotive and brand logos in the world. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models. Currently, they mainly produce A-Class cars, C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class vehicles (SUV off-road vehicles).
10
4
Share

What Causes Black Smoke from Fuel-Injected Vehicles?

Black smoke from fuel-injected vehicles is caused by incomplete combustion due to uneven or excessive fuel supply to each cylinder or insufficient air intake. Below is relevant information about cylinders: 1. Introduction: A cylinder is the cylindrical chamber within an engine where a piston, driven by the pressure or expansion force of the working fluid, moves. Some special types of engines may have similar, but non-cylindrical parts. 2. Types: In pneumatic transmission, cylinders are pneumatic actuators that convert the pressure energy of compressed gas into mechanical energy. Cylinders can be categorized into two types: those performing reciprocating linear motion and those performing reciprocating swinging motion. Cylinders performing reciprocating linear motion can further be divided into four types: single-acting, double-acting, diaphragm-type, and impact cylinders.
1
0
Share

What Causes the Buzzing Sound When Shifting to Reverse Gear in an Automatic Transmission Car?

The reasons for the buzzing sound when shifting to reverse gear in an automatic transmission car are as follows: 1. Dirt and impurities: There may be stubborn dirt and impurities inside, especially when they accumulate in the valve body, forming a blockage that prevents effective regulation of oil pressure, leading to abnormal noises. 2. Gears: Since most vehicles' reverse gears are not equipped with helical gears and synchronizers, the gears directly mesh with each other. Therefore, if a very loud noise occurs when shifting to reverse gear in an automatic transmission, it is mostly due to incomplete gear meshing, which is a normal phenomenon.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.