What is the purpose of neutral gear?

1 Answers
SanEmily
07/29/25 12:49pm
The functions of neutral gear are as follows: Towing: When a vehicle needs repair or temporary towing for other reasons, the gear must be shifted to N (neutral) position. Temporary parking: When the vehicle needs to be parked temporarily for a short period, you can park in N gear. However, if the waiting time is too long, the engine should still be turned off. Waiting at red lights: If you encounter a red light and need to wait for a while, you can choose to shift to N gear. This not only reduces fuel consumption but also avoids accelerating transmission wear, making it a very good practice.
Was this review help?
4
1
Share
More Forum Discussions

How many generations of Magotan models are there?

There are 8 generations of Magotan models. Taking the 2020 Comfort Magotan as an example, its body dimensions are: 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm, a fuel tank capacity of 66 liters, and a trunk capacity of 533 liters. The 2020 Comfort Magotan features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
15
1
Share

How to Perform Car Crystal Coating?

Car crystal coating operation method: 1. Drive the car to a shaded area and thoroughly clean the body; 2. Use clay bar with QD liquid to further clean the car body, ensuring a smoother surface; 3. Wipe the car with a non-woven cloth soaked in degreaser; 4. Pour the crystal coating liquid onto a specialized sponge or towel for coating, then evenly apply it to the car paint. It is recommended to work on one panel at a time until the entire car is covered. Car crystal coating forms a thin crystalline film on the paint surface, not only enhancing the gloss of the paint but also providing a certain level of protection to the paint surface.
20
3
Share

How many liters of engine oil should be added to the Mondeo 2.0L?

The Mondeo 2.0L requires 4.5 liters of engine oil, which can be determined by checking the oil dipstick's scale lines. The method involves parking the car on a level surface and turning off the engine. Wait for three to five minutes after turning off the engine to check the oil level, ensuring it does not exceed the MAX mark on the dipstick. Taking the 2020 Mondeo EcoBoost 200 Fashion model as an example, its body dimensions are: length 4873mm, width 1852mm, height 1470mm, with a wheelbase of 28500mm. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 207PS, a maximum power of 152kW, and a maximum torque of 354Nm. It is paired with a 5-speed automatic transmission.
11
3
Share

What is the oil specification for the Magotan?

The oil specification for the Magotan is SM grade or 5W30 synthetic oil. Engine oil is a crucial factor affecting engine performance and lifespan. Functions of engine oil: 1. Lubrication and wear reduction; 2. Auxiliary cooling; 3. Sealing and leakage prevention; 4. Rust and corrosion prevention; 5. Shock absorption. Taking the 2020 Comfort model Magotan as an example, its body dimensions are: length 4965mm, width 1832mm, height 1471mm, with a wheelbase of 2871mm. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
13
4
Share

What are the reasons for a car having power but no response when starting?

The reasons for a car having power but no response when starting are: 1. The battery is low on charge, and the voltage is insufficient to start the car; 2. The engine's spark plugs are damaged; 3. The distributor wiring is damaged; 4. The starter is damaged. Steps to start a manual transmission car: 1. Insert the car key into the ignition switch and turn it up one notch, pause to allow the fuel pump to start and for the fuel and electrical equipment to self-check; 2. Ensure the gear lever is in the neutral position and depress the clutch; 3. Turn the key up further, release the key after hearing the engine start; 4. The dashboard lights up, shift gears with the right hand, lift the left foot off the clutch pedal while moderately pressing the accelerator pedal to start the vehicle smoothly.
12
0
Share

What Are the Benefits of Car Window Tinting?

The benefits of car window tinting include blocking ultraviolet rays, reducing heat penetration, and preventing injuries caused by sudden glass shattering. Additionally, the one-way visibility feature of window tinting helps protect personal privacy. Furthermore, tinting can lower air conditioning energy consumption, enhance the vehicle's appearance, and to some extent, contribute to fuel savings. Precautions for car window tinting: 1. Do not roll down the windows or wash the car within three days after tinting; 2. For cars with a sunroof, avoid opening it within three days; 3. Avoid using strong adhesive labels directly on the tinted film for one month after application; 4. If bubbles appear at the edges of the tint, visit the installation site for repairs within 24 hours.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.