···
Log in / Register

What is the purpose of installing an antenna on a car?

3 Answers
MacKyle
09/05/25 6:14am
Installing an antenna on a car is primarily used for receiving external signals. Here is more information about car antennas: 1. Signal enhancement: In urban areas, signal station coverage is very extensive, so FM reception is possible even without an antenna. However, there may be times when driving to more remote areas, where the signal without an antenna can be quite poor. In such cases, the difference between having an antenna and not having one becomes significant. 2. Static electricity discharge: Besides receiving signals, antennas can also discharge static electricity. This is mainly to ensure the safety of the car, as static electricity can accumulate on car seats and the body. The antenna helps to release this static electricity. 3. GPS: It is believed that most cars nowadays are equipped with GPS, and the antenna can enhance the positioning signal for GPS. This not only improves signal stability but also makes GPS positioning more accurate.
Was this review help?
16
4
Share
MasonLee
09/17/25 6:36am
While driving, I noticed that installing an antenna mainly helps improve radio signal strength, especially for clear reception in remote mountainous areas or high-rise urban zones. For example, last month during a self-drive trip along the Sichuan-Tibet route, the original car antenna had intermittent signals. After adding a short antenna, the music played without interruptions, and navigation map updates became much faster. Additionally, in areas with weak mobile signals, the antenna can assist in receiving data traffic, making it more convenient to look up routes or stream podcasts online. Some people also use it to enhance GPS positioning accuracy, avoiding getting lost. Although simple to install, it proves highly useful—a small investment of just a few dozen yuan can significantly enhance the travel experience.
Was this review help?
15
0
Share
Expand All
TravisAnn
10/31/25 7:05am
As a radio enthusiast, I enjoy installing antennas on my car for CB communication or amateur radio operations. For example, during convoy trips, it allows real-time communication with teammates about their locations, and in emergencies, it enables quick calls for security assistance. Antenna selection is crucial—magnetic mounts are easy to detach, while fixed mounts offer better wind resistance. The fun is endless: not only do I make new friends, but I also get to participate in club activities. The signal coverage radius is impressive, easily reaching 20 kilometers under normal conditions, providing an extra layer of security in emergencies.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

How to Drive a Geely Boyue with Automatic Transmission?

Here is the driving method for a Geely Boyue with automatic transmission: 1. For starting or stopping, shift to P gear; for driving, shift to D gear; for reversing, shift to R gear; for long traffic light waits, shift to N gear; if the wait is short, remain in D gear and hold the foot brake. 2. When parking, first stop the car by pressing the foot brake, then engage the handbrake, shift to P gear, and turn the key to shut off the engine. 3. When starting, first turn the key to the power-on position, then fasten the seatbelt, and wait for the co-pilot's seatbelt reminder light to go off before turning the key to ignite the engine. Here is some additional information: P gear stands for Parking gear, which is used when the vehicle is parked for a long time. It locks the rotating parts of the car with a mechanical device inside the transmission to prevent the car from moving. The correct operation method is to first engage the handbrake and then shift to P gear. However, it is important to note that the P gear should only be used when the vehicle is completely stopped, otherwise the mechanical parts of the automatic transmission may be damaged.
8
4
Share

What are the differences between the 2017 and 2019 models of the 510?

510 refers to the Baojun 510. The 2019 model is essentially an upgraded version of the 2017 model, with no differences in the three major components, suspension, body dimensions, or configurations. The main differences lie in the price, exterior design, and some minor details. The specific differences between the 2017 and 2019 models are as follows: 1. The 2019 model is priced slightly higher than the 2017 model. 2. The infotainment system in the 2019 model can be upgraded to support internet connectivity, while the 2017 model cannot. 3. The 2019 model removed the rear privacy glass and active grille shutters, which were present in the 2017 model. 4. The front grille of the 2017 model features a distinct three-layer design, while the 2019 model upgraded to a matrix-style integrated grille. 5. For the rear, the 2019 model adopted a flatter design, enhancing the layered appearance of the tailgate and giving the rear a cleaner, more youthful look.
18
3
Share

Who Manufactures the Three Major Components of MG?

MG vehicles utilize three major components that are independently developed and manufactured by SAIC Motor. MG is a brand under SAIC Motor, offering a range of sedans and SUV models. The MG lineup includes models such as the MG6, MG ZS, MG HS, and MG GS. Below are relevant details: 1. The MG6 is a compact sedan. It has a wheelbase of 2715 mm, with length, width, and height dimensions of 4704 mm, 1848 mm, and 1466 mm respectively. The MG6 is equipped with two engine options: a low-power version of the 1.5-liter turbocharged engine and a high-power version of the 1.5-liter turbocharged engine. 2. The low-power 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 250 Nm. This engine reaches its peak power at 5500 rpm, with maximum torque available from 1700 to 4300 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission.
2
3
Share

Does Idling Consume a Lot of Fuel?

Idling does not consume a significant amount of fuel, but it can cause damage to the engine. Here are the details: Car Idling: Idling is an operational state of a car where the engine runs in neutral gear. The engine speed during idling is referred to as the idle speed. The idle speed can be adjusted by modifying the throttle opening, among other methods. Idling essentially means the engine is "working but not producing output." When the accelerator pedal is fully released while the engine is running, the engine enters the idling state. Causes of Unstable Idling: Direct causes include dirty, worn, or incorrectly installed mechanical components, leading to variations in the power output of individual cylinders. This results in an imbalance in cylinder power, causing unstable idling. Indirect causes involve abnormalities in the engine's electronic control system, leading to poor combustion of the air-fuel mixture, making it difficult to balance cylinder power and resulting in unstable idling. Hazards of Car Idling: When the engine idles for extended periods, incomplete combustion of gasoline can lead to increased carbon deposits in the car. Additionally, engine carbon buildup can affect the car's performance, and under severe conditions, the car may fail to start properly.
12
2
Share

How to Inflate the Spare Tire of Audi Q5?

Audi Q5's spare tire needs to be inflated using the onboard air pump. The specific steps are as follows: 1. Open the left partition in the trunk and take out the spare tire and the tools beneath it. 2. Locate a gray air pump approximately 20 cm in length and width, connect the pump's air nozzle tube to the spare tire, plug the power cord into the cigarette lighter socket, and turn on the air pump switch to inflate the spare tire. 3. During inflation, monitor the pressure gauge on the upper right of the pump, maintaining a normal tire pressure of 2.2-2.4 bar. If the pressure is too high, use the pressure relief valve button on the pump to release air.
18
4
Share

What is the ground clearance of the Lavida car?

The ground clearance of the Lavida chassis is 110mm. The minimum ground clearance of the Lavida refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. If the Lavida's ground clearance is higher, its off-road capability improves. However, if the ground clearance is too high, the stability during high-speed driving may decrease. As a mid-term facelift product, the most significant changes in the Lavida are concentrated in the front grille and interior styling. The Lavida's body dimensions are 4670 mm in length, 1806 mm in width, and 1474 mm in height, with a wheelbase of 2688 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Lavida's ground clearance is not static; this data also depends on the load condition. Therefore, changes in ground clearance should be considered based on variations in the Lavida's load. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or regions with poor road conditions, considering the vehicle's off-road performance, a higher ground clearance may be preferable to avoid scraping or damaging the chassis.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.