What is the purpose of car maintenance?

2 Answers
MarleyRose
07/24/25 2:54pm
Car maintenance purposes: 1. Keep the vehicle clean and tidy; 2. Maintain normal technical conditions; 3. Eliminate hidden dangers and prevent faults; 4. Slow down the deterioration process and extend the service life. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Cars are divided into minor maintenance and major maintenance. Minor maintenance refers to the routine maintenance items performed at the manufacturer's specified time or mileage to ensure vehicle performance, mainly including oil and oil filter replacement. Major maintenance refers to the routine maintenance performed at the manufacturer's specified time or mileage, including the replacement of oil, oil filter, air filter, and fuel filter.
Was this review help?
10
0
Share
EliFitz
08/11/25 8:34am
I've been driving for over a decade, and maintaining my car is mainly about saving money and peace of mind. A car is just like a person—it needs regular check-ups, or minor issues can turn into major problems. Every oil change and brake pad inspection helps prevent sudden breakdowns. I remember that time I forgot maintenance and had a tire blowout on the road—the towing and repairs cost me thousands. Since then, I've made it a habit to check tire pressure and fluid levels monthly, keeping my car running smoothly and saving on fuel costs. More importantly, it extends the car's lifespan, avoiding the need for a new one every three years. Maintenance is about protecting my investment and ensuring my daily commute isn't disrupted. There's also a safety aspect—checking brakes can prevent accidents, giving me and my family peace of mind on the road.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How to Maintain a Turbocharged Engine?

Turbocharged engine maintenance should pay attention to not leaving without warming up the engine, not shutting down immediately, keeping it clean, and frequently checking the operation of the turbocharger, etc. A turbocharged engine refers to an engine equipped with a turbocharger, which increases the intake air volume by compressing air. It uses the inertial impulse of the exhaust gas discharged by the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller then pressurizes the air delivered from the air filter pipeline, forcing it into the cylinder. The following are detailed explanations: 1. Remember not to leave without warming up the engine: After starting the engine, let it idle for a while to allow the lubricating oil to fully lubricate the bearings before the turbocharger rotor operates at high speed. Therefore, never rev the engine hard immediately after starting to prevent damage to the turbocharger oil seal. 2. Do not shut down immediately: After the engine has been running at high speed for a long time, let it idle for 3-5 minutes before shutting down. 3. Keep it clean: Clean the air filter on time to prevent dust and other impurities from entering the high-speed rotating compressor impeller, which could cause unstable speed or increased wear on the shaft sleeve and seals. 4. Frequently check the operation of the turbocharger: Before driving and after parking, check the connections of the air ducts to prevent loosening or detachment, which could lead to turbocharger failure and short-circuiting of air into the cylinder.
4
3
Share

Do I Need to Replace Both Front and Rear Brake Pads?

Front and rear brake pads do not need to be replaced together. Here are the specific details about brake pads: 1. In terms of replacement cycles, rear brake pads have a longer service life. Front brake pads need to be replaced every 30,000-50,000 kilometers, while rear brake pads can last for about 60,000-100,000 kilometers before replacement. 2. New brake pads are approximately 1.5 centimeters thick. If they wear down to only one-third of their original thickness, which is about 5 millimeters, they should be replaced promptly. When replacing brake pads, both pads on the same axle should be replaced together to ensure balanced braking performance on both sides. 3. The most common brake pad materials currently are semi-metallic and ceramic. Semi-metallic pads are commonly used in household vehicles, while ceramic pads are generally better—more wear-resistant, heat-resistant, with better thermal stability, faster heat dissipation, and higher friction coefficients. Ceramic pads are more often used in mid-to-high-end vehicle models.
17
0
Share

How Often Should Transmission Fluid Be Changed in a Car?

Car transmission fluid replacement is typically recommended every three years or 60,000 kilometers. However, most 4S dealerships usually advise changing it at the 60,000-kilometer mark, meaning the replacement is primarily mileage-based without strict time constraints. Over time, transmission fluid loses its viscosity, leading to reduced sealing effectiveness and diminished lubrication. Inadequate lubrication can affect the hydraulic system's performance, causing unstable pressure in the car's transmission. Below are the potential hazards of not changing transmission fluid for an extended period: 1. Delayed fluid replacement can result in abnormal wear and severe deterioration of the transmission fluid. 2. Prolonged use of old fluid under high-speed and high-temperature conditions can cause it to degrade and evaporate, accelerating mechanical wear and potentially damaging internal transmission components, thereby shortening the vehicle's lifespan. 3. Long-overdue fluid changes can cause the fluid to form particles, clogging oil passages and damaging valve bodies, directly impacting system oil pressure and power transmission. This may lead to sluggish response and rough gear shifting in the transmission.
20
2
Share

What are the triggering conditions for Audi A6L's on-demand four-wheel drive?

Audi's on-demand four-wheel drive activation conditions are as follows: 1. Snowy conditions: On snowy days, when there is a bit of ice and snow, the front wheels may slip. When the front wheel slip is detected, this function can be activated. 2. Muddy road conditions: When it's rainy and very muddy, causing both front and rear wheels to slip, the on-demand four-wheel drive will start to take effect. 3. Manhole cover situations: If the car falls into a manhole cover, causing the clutch to slip and emit a foul-smelling smoke, the four-wheel drive will also activate. The advantages of on-demand four-wheel drive are as follows: On-demand four-wheel drive only adds a viscous coupling between the front and rear axles, so its structure is relatively simple. This not only effectively reduces costs but also helps to lower the overall vehicle weight. It is suitable for models with a front transverse engine and front-wheel-drive platform, making it possible for many SUVs or four-wheel-drive sedans based on this platform to be equipped with a four-wheel-drive system. The role of on-demand four-wheel drive: It is the most suitable four-wheel-drive system for urban road conditions. When the vehicle is driving normally, the two-wheel-drive mode can achieve better fuel economy; while in some slippery or mild off-road situations, the four-wheel-drive system can ensure timely escape from danger.
14
0
Share

What does jmc mean?

jmc is the automobile brand - Jiangling Motors. The following is an introduction to Jiangling Motors: 1. Technology: Jiangling absorbs the world's most advanced product technology, manufacturing processes, and management concepts. Effective equity balance mechanisms, highly transparent operations, and high-level management enable the company to form a standardized management and operation system, ensuring the effectiveness of corporate governance and scientific decision-making through scientific systems. Jiangling has established research and development, logistics, sales services, and financial support systems and operational mechanisms that comply with international standards, making it a successful model of cooperation between local Chinese enterprises and foreign capital. 2. Mechanism: Jiangling's corporate culture construction always tracks the most advanced product technology, the latest business concepts, and management methods, aiming to be a leading modern enterprise in the industry. Through open concepts and aggressive systematic planning and corporate culture development strategies, Jiangling produces good cars, trains the best employees, and builds a first-class corporate image, achieving excellent results in both economic development and cultural construction. The company has a diverse, flexible, and effective employee team-building mechanism.
4
4
Share

In which year was the Audi A6L C8 produced?

Audi A6L C8 was first produced in 2012. Below is relevant information about the Audi A6L: 1. Introduction: The Audi A6L is the first Audi model to enter the Chinese market, with its predecessor being the third-generation Audi 100 (code-named C3) introduced in China in 1988. The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the new German A6, serving as the successor to the A6. In June 2012, the new-generation Audi A6L was launched, equipped with a 35 TFSI powertrain, and its exterior design somewhat resembled the new version of the A4L. 2. Design: The new Audi A6L features a five-link front suspension design, balancing the necessary rigid connection for sportiness and comfort with lower static stiffness. Among these, the hydraulic frame damping support significantly improves driving comfort and effectively mitigates the impact and jerkiness when passing over speed bumps or uneven road surfaces, thereby reducing the impact on the lumbar spine.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.