What is the purpose of car cruise control?

Which gear should an automatic car be in to start?

An automatic car must be in the P (Park) gear to start. Below is a related introduction to car gears: 1. P - Park Gear: When the car is parked and not in use, the gear should be in this position. At this time, the wheels are mechanically locked to prevent rolling. 2. R - Reverse Gear: Used when reversing the car. 3. N - Neutral Gear: Used when temporarily stopping (e.g., at a red light). Note that this gear position indicates neutral. To prevent the car from rolling on a slope, always keep the brake pedal pressed. 4. D - Drive Gear: Used when moving forward. 5. L - Low Gear: When going downhill or on a long slope, shifting to this gear restricts the car to the lowest gear (equivalent to first gear in a manual car). This allows the car to use engine power for braking, preventing the driver from having to press the brake for extended periods, which could overheat the brake pads and cause danger. 6. S - Sport Mode: When shifted into this gear, the gears can be freely switched, but the shifting timing is delayed to keep the engine at high RPM for a while, increasing the car's power. This gear position will result in higher fuel consumption.

1

Share

What type of driver's license is required for a 14-seater vehicle?

14-seater vehicles are classified as medium-sized buses, requiring either a B1 or A1 driver's license to operate. Below is detailed information about vehicle driver's licenses: 1. Overview: The full name of a driver's license is 'Motor Vehicle Driving License,' commonly referred to as a 'driver's license.' It is a legal document that must be obtained by individuals who wish to operate motor vehicles. Driving a motor vehicle requires certain driving skills, and those lacking such skills may cause traffic accidents if they drive recklessly. Driving without a license is prohibited. 2. Important Notes: Permission to drive vehicles is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal process that must be conducted by an authorized agency.

9

3

Share

What does istop mean in the Atenza?

istop is called auto start-stop in Chinese, which refers to the start-stop of the engine. It is automatically enabled by default after the car starts. The istop switch is located between the steering wheel and the fuel tank switch. When you press the brake pedal deeply and the car comes to a stop, the engine will shut off, and a green istop indicator light will appear on the dashboard. Here is some additional information: Engine auto start-stop: Engine auto start-stop automatically turns off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. When you need to proceed, the system automatically restarts the engine. Its English name is STOP&START, abbreviated as STT. The STT intelligent fuel-saving system is a set of systems that control the start and stop of the engine.

11

0

Share

Requirements for Ruqi Chuxing Drivers

Requirements for Ruqi Chuxing drivers are as follows: 1. Certification: Possess a ride-hailing driver qualification certificate. 2. Driver's license: Hold a C1 or above motor vehicle driver's license with at least 3 years of driving experience. 3. Violation records: No records of traffic accident crimes, dangerous driving crimes, drug abuse, drunk driving, or violent crimes; no record of accumulating 12 penalty points within any consecutive 3 scoring cycles. 4. Residence permit: For those without a ride-hailing driver certificate, must have Guangzhou household registration or possess a Guangzhou residence permit. 5. Age: Below the national statutory retirement age, with at least junior high school education and in good health.

4

2

Share

Is the acceleration performance of CVT good?

CVT transmissions do not require shifting between different gears like traditional AT transmissions, eliminating the pause during gear shifts and allowing for continuous acceleration, thus providing better acceleration performance. Additionally, CVT transmissions have high and stable transmission efficiency, with significantly less energy loss compared to conventional AT transmissions, resulting in a higher proportion of engine power being converted into vehicle kinetic energy, which further enhances acceleration performance. Below is some related information about CVT transmission fluid: 1. Benefits of changing transmission fluid: Regularly replacing the transmission lubricant ensures the normal operation of the transmission, helps save fuel consumption to a certain extent, and extends the service life of the vehicle. 2. Models equipped with CVT transmissions: Mainly Japanese brands, which use CVT transmissions quite extensively. These transmissions offer excellent stability during use. Although the related technology is not as advanced as dual-clutch transmissions, CVT transmissions have a lower failure rate, making them very suitable for use.

11

4

Share

What is the ground clearance of the XT6?

The minimum ground clearance is 170mm, the side ground clearance is 200mm, the turning radius is 11.89m, the approach angle is 16 degrees, and the departure angle is 22 degrees. The Cadillac XT6 features smooth body lines, with wheel arches and side skirts in the same color as the body, enhancing the overall sense of premium quality. Its dimensions are 5056/1964/1780 (length/width/height), with a wheelbase of 2863mm. Here is additional information: Space: A spacious three-row, six-seat layout: The cabin maximization design philosophy ensures comfort in every seat of the XT6. The generous headroom in all three rows surpasses competitors; the second-row independent seats provide ample moving space; the third-row space does not compromise, offering ample legroom to greatly reduce fatigue on long journeys.

12

3

Share

What is the purpose of car cruise control?

Which gear should an automatic car be in to start?

What type of driver's license is required for a 14-seater vehicle?

What does istop mean in the Atenza?

Requirements for Ruqi Chuxing Drivers

Is the acceleration performance of CVT good?

What is the ground clearance of the XT6?

What is Oil Burning?

How is the quality of the Trumpchi GS4?

What is the fuel consumption of the Odyssey 2.4?

What does rubbing off numbers mean?