What is the purpose of a parking number plate?

How to Solve the Sunroof Rattle on Bumpy Roads?

Sunroof rattling on bumpy roads is caused by vibrations between the sunroof and its sliding rails. It is recommended to avoid fully opening the sunroof on extremely rough roads, as excessive vibration between the sunroof and rails may lead to deformation of related components or even damage the motor. Owners are advised to visit a repair shop or 4S dealership to apply specialized sunroof lubricant. Below are some important precautions for sunroof usage: 1. When opening the sunroof, check for any obstacles on the roof that might hinder its upward or backward movement, as overload could burn out the motor or accidentally scratch the glass surface. 2. Always operate the sunroof correctly when opening or closing it, as improper handling may cause excessive current in the motor, leading to burnout. 3. Avoid opening the sunroof when driving on extremely bumpy roads, as severe vibration between the sunroof and rails may deform components, potentially causing damage during operation. 4. Do not direct high-pressure water jets at the sunroof's sealing strips during car washing, as this may deform the seals and cause leaks.

3

1

Share

Why Does Subaru Use CVT Transmissions?

Subaru's transmission is quite different from other vehicles, with the transfer case and transmission being integrated as a single unit. This means that each update or redesign requires comprehensive development, which takes considerable time and presents significant technical challenges. In contrast, using a CVT transmission reduces these difficulties to some extent. Below are the advantages of CVT transmissions: Optimal Power Delivery: A CVT transmission allows the car to always be in the correct "gear." Unlike automatic or manual transmissions, programming a CVT keeps the engine's RPM within the optimal power range rather than delivering a sudden burst of power when the driver accelerates. In certain scenarios, especially when overtaking, a CVT transmission can provide the most direct performance. Superior Fuel Efficiency: CVT transmissions are more efficient than manual, dual-clutch, or automatic transmissions—at least in terms of fuel economy. They enable the car to operate at the most economical RPM at all times. When cruising at a steady speed, a car equipped with a CVT transmission can maintain very low RPMs, significantly reducing fuel consumption.

7

2

Share

What brand of transmission oil is used in the Haval H7?

Haval H7 is equipped with a 6-speed dual-clutch transmission from Getrag, which is originally imported, with the model number: 6DCT451. Compared to common dual-clutch transmissions, the Haval H7's transmission performs well in terms of smooth gear shifting, although the shifting speed is relatively slow, similar to traditional AT transmissions. The functions of the 6-speed dual-clutch transmission and the method for changing the transmission oil in the Haval H7 are as follows: Functions of the 6-speed dual-clutch transmission in Haval H7: Changing the transmission ratio to expand the range of torque and speed variations of the driving wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable conditions (higher power and lower fuel consumption). Method for changing the transmission oil in Haval H7: Using a machine to change the transmission oil while the car is running. In this state, the oil flows internally, carrying out impurities from the transmission. Typically, about 12 liters of oil are used, making the machine oil change method thorough and clean.

15

1

Share

What is the cause of no warm air in BMW 5 Series?

The reasons for no warm air in BMW 5 Series are as follows: Heater core blockage: When the inlet pipe of the heater core is hot while the outlet pipe remains cold, it indicates poor circulation in the air conditioning radiator. The radiator fins of the air conditioning system are very delicate. After prolonged use, scale and impurities in the coolant can clog the radiator's internal passages, leading to poor circulation and insufficient heat transfer to provide warm air for the cabin. This situation constitutes an internal blockage of the air conditioning radiator. Clogged cabin air filter: The primary function of the cabin air filter is to remove impurities from the air entering the air conditioning system. When the filter becomes clogged, insufficient air enters the system, preventing the blower from generating adequate airflow to deliver warm air. Aging blower motor: As the blower motor ages and its efficiency decreases, it may produce loud noise but weak airflow. This prevents timely and effective heat transfer from the heater core to the cabin, resulting in insufficient warm air output.

7

2

Share

Where is Isuzu engine produced?

Isuzu engines are produced in Chongqing. Isuzu diesel engines supply many domestic OEMs. Isuzu signed an agreement with Qingling Motors, with both parties investing equally to establish Isuzu's fifth global engine plant in Chongqing - Qingling Isuzu Engine Company. Below is relevant information about Isuzu engines: 1. Power: The 4JK1 engine employs advanced VGS variable geometry turbocharging technology, enabling the engine to deliver maximum torque of 320Nm at just 1800 rpm, achieving high torque at low speeds for stronger power when climbing slopes or hauling heavy loads. 2. Fuel consumption: The 4JK1 engine adopts Ddi ultra-high pressure common rail technology with injection pressure up to 180 MPa, resulting in better atomization and more complete combustion, saving 20%-30% fuel compared to gasoline engines of the same displacement. 3. Noise reduction: The 4JK1 engine uses steel timing silent chains with outstanding noise reduction performance. Additionally, Isuzu's timing chains feature a tooth-groove design without gaps, matching the engine's lifespan and requiring no replacement throughout the vehicle's lifetime.

10

5

Share

How many cylinders does the new Cavalier have?

Cavalier uses a three-cylinder engine. Below is a related introduction to the three-cylinder engine: Introduction to the three-cylinder engine: A three-cylinder engine is an engine composed of three cylinders. Inside it, three identical single cylinders are arranged on one engine block sharing a crankshaft to output power. Its main function is to convert chemical energy into mechanical energy. The basic principle of a three-cylinder engine is to use the chemical energy of gasoline (diesel) to convert into thermal energy. The combustion and expansion of the mixed gas in the sealed cylinder push the piston to do work, converting thermal energy into mechanical energy. Its main purpose is to provide power for traditional fuel vehicles and new energy hybrid models. Advantages of the three-cylinder engine: Due to its structural advantages, the three-cylinder engine performs excellently in fuel consumption control. The miniaturization of the engine makes it smaller in size, higher in power density, and more efficient in thermal efficiency. Because of its structure, the three-cylinder engine has lower pumping losses. Additionally, due to the smaller cylinder block, the friction loss during operation is also smaller, and the corresponding heat dissipation loss is reduced.

16

5

Share

What is the purpose of a parking number plate?

How to Solve the Sunroof Rattle on Bumpy Roads?

Why Does Subaru Use CVT Transmissions?

What brand of transmission oil is used in the Haval H7?

What is the cause of no warm air in BMW 5 Series?

Where is Isuzu engine produced?

How many cylinders does the new Cavalier have?

What does the LIM button in a car mean?

What are the disadvantages of hybrid cars?

Why Use Turbocharging?

Can the Vehicle Charge While Idling?