What is the pure electric range of Dongfeng e11k?

How to reset the tire pressure on a 2018 Volkswagen Lavida?

The method to reset the tire pressure on a 2018 Volkswagen Lavida is to press the black knob on the instrument panel, turn the ignition key three times to the second position without starting the vehicle, and the reset will be completed. If it's time for maintenance, try not to delay it. When the ignition switch is in the ON position, the 'SERVICE' indicator on the display will flash, and it will disappear after starting the engine, indicating that the vehicle requires maintenance. More information about the 2018 Volkswagen Lavida is as follows: 1. The 2018 Lavida uses the MQB platform, with a more refined overall exterior design. The front features a finely detailed horizontal grille that exudes a sense of stability, while the side profile showcases sharp lines, a robust frame, and a well-proportioned, elongated appearance. 2. Powertrain: The manual comfort version is primarily equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 85 kW and a maximum torque of 150 Nm, paired with a 5-speed manual transmission. 3. Space: The vehicle has a wheelbase of 2688mm, offering approximately two fists of legroom in the rear seats and three fingers of headroom. The seat cushions provide excellent support for the legs, ensuring comfort during long rides and a spacious feel. 4. Chassis: The suspension setup consists of a front MacPherson strut and a rear torsion beam, tuned to be firm and solid with good resilience, striking a balance between support and vibration absorption.

4

5

Share

How to Deal with Oil Leakage in Buick Excelle Engine?

The methods to deal with oil leakage in Buick Excelle engine are: 1. Replace the valve cover gasket; 2. Remove the engine timing cover and reapply sealant; 3. Tighten or replace the oil drain plug; 4. Replace the oil drain plug gasket; 5. Install a new oil filter; 6. Remove the oil pan, replace the oil pan gasket, and reapply sealant; 7. Replace the crankshaft oil seal. Taking the 2018 Buick Excelle as an example, it is a compact car with the following dimensions: length 4609mm, width 1798mm, height 1486mm, wheelbase 2640mm, fuel tank capacity 44l, and trunk capacity 400l.

2

3

Share

Where is the OBD port of Haima S5?

The OBD port of Haima S5 is located inside the storage compartment below the left side of the steering wheel. After opening the storage compartment, lift the cover of the storage compartment upwards with force, and remove the cover to see the OBD interface. Taking the 2019 Haima S5 as an example, its body dimensions are: length 4418mm, width 1823mm, height 1630mm, wheelbase 2630mm, front track 1540mm, rear track 1545mm, and curb weight 1380kg. The 2019 Haima S5 has a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122PS, maximum power of 90kW, maximum torque of 160Nm, and is paired with a 5-speed manual transmission.

18

4

Share

What's the Difference Between the Volkswagen Phideon and Passat?

Passat belongs to the B-segment category, while Phideon is classified as a C-segment model. The specific differences between the Phideon and Passat are as follows: 1. Different Selling Prices: The official guide price for the Phideon ranges from 340,000 to 639,000 RMB, whereas the Passat's official guide price is from 184,900 to 282,900 RMB, clearly indicating that the Phideon is priced higher than the Passat. 2. Different Space Sizes: In terms of space, the Phideon offers slightly more room than the Passat. 3. Different Powertrain Systems: The Phideon comes with multiple gasoline and diesel engine options or a plug-in hybrid system, paired with an automatic transmission. The Passat is equipped with a plug-in hybrid system consisting of a 1.4T engine, an electric motor, and a ternary lithium battery pack. The 1.4T engine delivers a maximum power of 150 horsepower, the electric motor provides a maximum power of 116 horsepower, and the combined maximum power reaches 211 horsepower. 4. Different Design Concepts: The Phideon's design focuses on fashion, dynamism, simplicity, and practicality, with horizontal lines enhancing the visual stretching effect. The detailed horizontal lines and waistline give the car a sculptural feel. On the other hand, the Passat integrates a dot-matrix horizontal grille with the front headlights on both sides, featuring flowing light-shadow dual waistlines that extend from the headlights and blend with the spoiler lines.

9

5

Share

What type of engine oil should be used for the Buick Envision?

Buick Envision requires 5w30 engine oil. The method for adding engine oil is as follows: 1. Lift the vehicle, remove the underbody shield, and place a container with a capacity of about 10 liters beneath the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after the oil has completely drained and wipe it with a tissue to check for leaks; 3. Reinstall the underbody shield and lower the vehicle, then use a funnel to add engine oil through the oil filler port. Taking the 2020 Buick Envision as an example, it is a midsize SUV with body dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, a wheelbase of 2750mm, and a fuel tank capacity of 66 liters. The 2020 Buick Envision is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm.

18

1

Share

What is the replacement interval for a car's oxygen sensor?

Car oxygen sensors should be replaced after more than 100,000 kilometers. The oxygen sensor is a crucial feedback sensor in the fuel-injected engine control system, used to regulate vehicle exhaust emissions. Symptoms of a faulty oxygen sensor include: 1. Decreased engine power, increased fuel consumption, and unstable idle speed during operation; 2. Excessive carbon content. The working principle of the oxygen sensor is: using ceramic sensing elements to measure the oxygen potential in the heating furnace or exhaust pipe, then calculating the corresponding oxygen concentration based on chemical equilibrium principles, thereby monitoring and controlling the air-fuel ratio of combustion in the furnace to ensure product quality and compliance with exhaust emission standards.

12

4

Share

What is the pure electric range of Dongfeng e11k?

How to reset the tire pressure on a 2018 Volkswagen Lavida?

How to Deal with Oil Leakage in Buick Excelle Engine?

Where is the OBD port of Haima S5?

What's the Difference Between the Volkswagen Phideon and Passat?

What type of engine oil should be used for the Buick Envision?

What is the replacement interval for a car's oxygen sensor?

Does converting from gasoline to natural gas affect the engine?

Location of the Cadillac XTS Cabin Air Filter

What to Do If the Driver's License Has Not Been Renewed?

How to Determine if a Compressor is Good or Bad?