What is the proportion of high-strength steel in the Lingpai's body?

What does the AAS fault warning in Mercedes-Benz mean?

Mercedes-Benz reporting an AAS fault indicates an issue with the air suspension system. Meaning of AAS: AAS stands for Adjustable Air Suspension control system. When the AAS warning appears on the vehicle, it refers to the Adjustable Air Suspension control system. It is recommended to first read the fault codes and then inspect the vehicle's suspension system for specific causes. Possible reasons for AAS fault warning: When parking, after releasing the brake pedal, the Starting Assist System (AAS) can maintain the braking effect for up to 1.5 seconds to prevent the vehicle from rolling back on slopes. There are two possible reasons triggering the AAS warning light on the instrument panel: Distance Control System malfunction; or auxiliary battery failure.

3

5

Share

What are the differences between Yunnei D30 and Dewei D30?

The main difference between Yunnei D30 and Dewei D30 lies in the valves. Yunnei D30 has one intake valve and one exhaust valve, while Dewei D30 has two intake valves and two exhaust valves. Engine valves consist of a valve head and stem, specifically responsible for drawing air into the engine and expelling exhaust gases after combustion. Structurally, they are divided into intake valves (usually made of alloy steel) and exhaust valves (typically made of heat-resistant alloy). The intake valve's function is to draw air into the engine for mixing with fuel and combustion, while the exhaust valve's role is to expel the post-combustion exhaust gases and dissipate heat. Dewei engines generally convert chemical energy into mechanical energy, suitable for power generation devices, and can also refer to the entire machine including the power unit. Their advantages include energy savings and higher efficiency in converting fuel into kinetic energy. However, Dewei engines face difficulties in cold-start conditions, so during winter parking, it's advisable to position the vehicle's front toward a building to block wind gusts and prevent the engine from becoming excessively cold due to freezing winds.

2

5

Share

Why Can't a Motorcycle Engine Start?

When a motorcycle engine fails to start normally after 2-3 attempts, it indicates a fault, which generally falls into three main categories: electrical circuit, fuel system, and cylinder pressure. Motorcycle ignition methods are divided into electric start and kick start: Electric start usually ignites the engine in one go. If it fails to start after two or three attempts, avoid using the electric start further. The reason is that frequent use of the electric start when the engine doesn't ignite can easily drain the battery, causing damage due to power loss. Instead, use the kick start. In winter, when temperatures are low, starting the engine can be difficult. In such cases, adjust the choke (also known as the air damper). Under normal conditions, the choke should be fully pressed down. For cold starts in winter, pull it to the topmost position. After the engine starts, leave it in this position for about 15 seconds, then adjust it to the middle. Once the engine has warmed up, return the choke to its normal state by pressing it fully down. This process typically takes about three to five minutes. Regarding idle speed issues: Sometimes, the engine fails to start due to low idle speed. In summer, the idle speed is usually adjusted so that the tachometer needle points to one or slightly more than one mark. In winter, adjust it to between one and a half and two marks.

17

5

Share

Where is the original car amplifier located in a Jeep Wrangler?

The original car amplifier in a Jeep Wrangler is located above the brake pedal. Function of the car amplifier: The function of the car amplifier is to select and preprocess the audio input signal, amplify the power, and enable the electrical signal to drive the speakers. Since the car stereo integrates the power amplification function and serves as the pre-amplifier, the car amplifier is sometimes referred to as the post-amplifier, meaning it can connect to already amplified high-level inputs. Introduction to car amplifiers: The amplifier is a key component of a high-quality sound system. The amplifier built into the car stereo cannot accurately amplify the audio current, so to achieve a superior music experience, an additional amplifier must be installed. The power of the amplifier should be greater than that of the speakers.

3

2

Share

What are the differences between Mercedes-Maybach and AMG?

Taking the Mercedes-Benz S-Class and Maybach S-Class as examples, the differences between Maybach and S-Class AMG include variations in length, lettering badges, and body structure. Length differences: Mercedes-Benz S-Class: The vehicle length is 5283mm, width is 1905mm, height is 1497mm, and wheelbase is 3365mm. Maybach S-Class: The vehicle length is 5466mm, width is 1899mm, height is 1497mm, and wheelbase is 3365mm. Lettering badge differences: Mercedes-Benz S-Class: The left side of the Mercedes S displays the vehicle model, while the right side shows the all-wheel-drive badge. The Mercedes S has dual single exhaust pipes. Maybach S-Class: All Maybach models are all-wheel-drive, with the left side featuring the Maybach lettering badge and the right side displaying the vehicle model. The Maybach S has dual quad exhaust pipes. Body structure differences: Mercedes-Benz S-Class: 4-door, 5-seat sedan. Maybach S-Class: 4-door, 4-seat sedan.

16

4

Share

Is 80 points a passing score for C1 Subject 3?

C1 Subject 3 with 80 points is not a passing score. The full score for C1 Subject 3 is 100 points, and 90 points are required to pass. Exam content for Subject 3: The C1 Subject 3 exam consists of 16 items, including preparation for getting on the car, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, passing crosswalks, passing school zones, passing public bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. Important notes for the Subject 3 exam: If the examinee's fingerprint verification fails, they must get off the car to re-collect their fingerprint before rejoining the queue for the exam. If the examinee's score falls below the passing threshold during the exam, the system will automatically prompt them to pull over. After completing the pulling over action, the system will prompt for the next exam attempt. After completing all required exam items and driving a distance of more than 3 kilometers as instructed, the system will automatically prompt to pull over. Upon hearing the pulling over prompt, the examinee should choose a clear curb (or solid road edge line) along the exam route and complete the pulling over action after confirming safety. The system will then announce the exam result. When walking around the car to inspect the vehicle's appearance and surrounding environment, maintain a distance of within 1 meter between the body and the car to ensure accurate radar signal detection.

4

Share

What is the proportion of high-strength steel in the Lingpai's body?

What does the AAS fault warning in Mercedes-Benz mean?

What are the differences between Yunnei D30 and Dewei D30?

Why Can't a Motorcycle Engine Start?

Where is the original car amplifier located in a Jeep Wrangler?

What are the differences between Mercedes-Maybach and AMG?

Is 80 points a passing score for C1 Subject 3?

Where to Renew Driver's License in Minhang District?

What is the difference between BMW Leading and Luxury models?

How many types of Yamaha 100cc scooters are there?

How is the lighting effect of the Lavida Plus headlights?