What is the process of picking up a car and getting a license plate at a 4S store?

2 Answers
Jocelyn
07/25/25 5:23pm
The process of picking up a car and getting a license plate at a 4S store is as follows: 1. Pay a deposit to order the car: In most cases, consumers usually place an order first when buying a car, which requires paying a deposit and signing a purchase contract with the 4S store. 2. Pay the balance: When the new car arrives at the store or is ready, the salesperson will contact the owner to come and pay the balance. It is important to carefully inspect the car before paying the balance to ensure there are no issues with the vehicle. 3. Pick up the car: After paying the balance, the car officially belongs to the owner. At this point, a temporary license plate can be obtained directly at the 4S store, which usually takes about half an hour. Once the temporary plate is issued, the car can be driven on the road. 4. License plate registration: Since the owner has requested the 4S store to handle the license plate registration, all the necessary procedures for the new car will be handled by the 4S store. The owner only needs to bring the required documents and drive the new car to the vehicle management office at the agreed time. The owner can then simply sit in the car while the representative from the 4S store completes all the license plate registration procedures. 5. Install the license plate: Once the official license plate is issued, it just needs to be installed on the vehicle. At this point, the entire car purchase process is complete.
Was this review help?
20
1
Share
Kate
08/11/25 10:09pm
I just picked up two cars from the 4S dealership, and the whole process was quite organized. When taking delivery, the salesperson will first guide you through the vehicle inspection—checking for scratches on the body, ensuring the engine starts smoothly, and test-driving to confirm all functions are working properly. If everything is fine, you’ll sign the documents, make the payment, and receive the keys and invoice. Next, to get the license plates, you’ll need to visit the DMV with your ID, purchase invoice, compulsory insurance policy, vehicle certification, and proof of purchase tax payment. After queuing for inspection, taking photos, and selecting a plate number, it usually takes about one or two hours to complete. Don’t forget to apply for a temporary license plate to drive home legally and avoid being stopped by traffic police. It’s best to let the 4S dealership handle the formalities—they’re familiar with the process and can save you time. I recommend going early to avoid peak hours and delays. The whole process goes smoothly if you pay attention to details.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What are the body dimensions of the Trumpchi GA6?

The body dimensions of the Trumpchi GA6 are a wheelbase of 2815mm, length of 4891mm, width of 1850mm, and height of 1505mm. The interior space of the Trumpchi GA6 is relatively large, and this model is equipped with a 1.5-liter turbocharged four-cylinder engine across the entire lineup. The 1.5-liter turbocharged four-cylinder engine of the Trumpchi GA6 has a maximum power of 124 kW and a maximum torque of 265 Nm, which can be delivered from 1700 rpm up to 4000 rpm. It is equipped with GCCS and DCVVT technologies and features an aluminum cylinder head and cast iron cylinder block.
18
3
Share

What is the ground clearance of the Buick Verano?

The ground clearance of the Buick Verano is 110 millimeters. Ground clearance refers to the minimum distance between the ground and the car's chassis. The maintenance methods for the car chassis are: 1. Regularly check the condition of the car tires; 2. Regularly clean and wipe the car chassis; 3. Promptly inspect the working condition of various components during the car's operation; 4. Regularly maintain and inspect the car's shock absorbers. Taking the 2020 Buick Verano as an example, it is a compact car with a body length of 4723mm, width of 1802mm, height of 1466mm, a wheelbase of 2700mm, and a fuel tank capacity of 52 liters. This car is equipped with a 1.0-liter turbocharged engine, delivering a maximum horsepower of 125 PS, a maximum power of 92 kW, and a maximum torque of 180 Nm, paired with a 6-speed automatic transmission.
19
4
Share

Is the Power Steering Oil Leak a Serious Issue?

Power steering oil leak is a serious issue. Causes of power steering oil leakage: 1. The original machine's screw holes are drilled through, or during maintenance, longer screws are used to penetrate or crack the screw holes, causing the lubricant inside the box to seep out along the threads; 2. Uneven cover surface or misalignment between the guide hole and the two planes, leading to improper riveting or guide deviation; 3. Uneven bolt torque, causing deformation of the side cover and bottom cover, or improper adjustment of the number of gaskets; 4. Poor concentricity between the steering arm bearing hole and the oil seal seat hole of the steering worm box, resulting in leakage at the steering arm shaft oil seal; 5. Cracks, sand holes, air holes in the power steering housing, or loose metal around the screw holes.
17
3
Share

Is the Trumpchi GE3 a pure electric vehicle?

Trumpchi GE3 is a pure electric vehicle. It does not use a traditional fuel engine but is equipped with a permanent magnet synchronous motor with a maximum horsepower of 180, providing relatively strong power that can meet most people's needs. Its body dimensions are 4337mm in length, 1825mm in width, and 1640mm in height. The total power of the Trumpchi GE3's motor is 132kw, with a total torque of 280nm. In terms of suspension, the front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. In terms of configuration, it comes standard with driver and passenger airbags, body stability control system, rear parking radar, driving mode switching, keyless start, USB interface, LED headlights, electric adjustment for exterior rearview mirrors, etc.
2
5
Share

How to Fix a Dropped Headliner?

Use a bottle of special automotive glue or adhesive product, spray the glue along the edge after peeling it open, let it dry for 3-5 minutes, and then press it back into place. Below is some relevant information about car headliner fabric: 1. Function: The car headliner fabric is an important part of the vehicle's roof, primarily serving to enhance the interior decoration. Additionally, the composite fabric of the car headliner can improve thermal insulation from the outside, reduce interior noise, and enhance sound absorption. It increases the comfort and safety for passengers. 2. Material: Textiles account for more than 50% of the materials used in car headliner fabric. Automotive textiles mainly include woven fabrics, knitted fabrics, non-woven fabrics, and fiber composites, with knitted and woven fabrics being the two major categories.
16
3
Share

What Causes the Loud Engine Roaring Sound When Accelerating in the Outlander?

The reasons for the loud engine roaring sound during acceleration include: exhaust pipe leakage, dirty or clogged throttle, and engine misfiring. The specific causes are as follows: 1. Exhaust pipe leakage: When there is a leak in the intake or exhaust pipe, the vehicle's exhaust rate increases during acceleration, resulting in a loud roaring sound. 2. Dirty or clogged throttle: During acceleration, the engine's load increases, requiring the throttle to open wider and more fuel to be injected. If the throttle does not open to the optimal position due to dirt or clogging, it can cause poor air-fuel mixture ratio, leading to noise during acceleration. 3. Engine misfiring: Engine misfiring mainly refers to one or more cylinders not functioning properly, typically manifested as insufficient vehicle power, severe shaking of the exhaust pipe, and a clear "popping" or thumping sound from the engine.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.