What is the process of full vehicle painting?
3 Answers
The process of full vehicle painting is: 1. Remove oil stains and rust from the body surface, degrease the surface of plastic parts, and keep the car surface clean; 2. Use zinc-based phosphating liquid to phosphorate the body surface, then rinse with clean water, wait for the body to dry before painting; 3. Pay attention to air pressure and nozzle size during spraying, ensuring the car paint surface is even and smooth; 4. After painting, drive the vehicle into a paint baking room to dry quickly and solidify the paint. The methods for car paint maintenance are: 1. Wash the car after the engine has cooled down; 2. Reduce exposure to direct sunlight; 3. Clean stains on the body promptly; 4. Rinse with clean water after rain to avoid acid rain corrosion; 5. Apply wax or glaze sealing.
When I refurbished my old car and gave it a full paint job, the first step was to thoroughly wash it clean, using a water gun to rinse off the mud and dust, followed by polishing the body surface with professional cleaning agents. The sanding process was quite tiring—using sandpaper or a machine to remove the old paint layers and rust marks, ensuring the metal base was exposed. After sanding, all residual dust had to be cleaned off, leaving not a single speck behind. Then, a primer coat was sprayed as a base layer to help the subsequent paint adhere more firmly. Once dried, the topcoat—the actual car color—was applied in two or three even layers. Finally, a clear coat protective layer was added for gloss, and the car was moved into a baking room to dry and cure, usually waiting one or two days before taking it out for manual polishing and smoothing. The entire process required attention to detail, with a dust-free environment to avoid bubbles or unsightly dirt spots on the paint. When I did it myself, I found patience and following the steps meticulously were key, and choosing the right painting tools helped avoid material waste.
I just had my car fully repainted. The process started with thoroughly washing the body to remove dirt and grime, then drying it with compressed air. Next, an electric grinder was used to smooth out surface imperfections and remove old paint layers – skipping this step properly can lead to new paint peeling. After cleaning, primer was sprayed to enhance adhesion, followed by color paint after slight drying, with steady spray gun movements ensuring even coverage without drips. Clear coat was then applied to protect the surface gloss before baking in a high-temperature booth to accelerate hardening. Final steps included precision polishing to restore shine and thorough inspection for flaws. The entire process took over a week, mainly for drying time to prevent premature use causing blotches. I recommend choosing a reputable repair shop for worry-free results.
