What is the process of buying a new car?

2 Answers
StEthan
07/24/25 10:22pm
Here is a detailed introduction to the process of buying a new car: 1. Choosing a car: Before purchasing, gather information about the car model you want through various channels such as the internet, friends, or other means. Based on the model, price, and features you desire, select a sales company and visit the 4S store to further understand the specific model with the salesperson. 2. Test driving: After selecting a car, it is essential to test drive it to evaluate aspects like the seats, steering wheel, comfort, etc., considering multiple factors. 3. Paying the deposit: Once you have chosen the car model and negotiated the price, you can proceed to pay the deposit. 4. Taking delivery: After completing the selection of the model, configuration, price, and other procedures, and making the payment, you can take delivery of the car. 5. Invoice verification: After payment, the dealer will provide the purchase invoice, which you can then take to the local Administration for Industry and Commerce or the vehicle market management office to have it stamped. Required documents include the purchase invoice, vehicle qualification certificate, and personal or company ID (for imported vehicles, customs and inspection certificates are required). 6. Car insurance: Insurance must be purchased before obtaining the license plate. Insurance agencies in the car market can handle the insurance procedures during the purchase to avoid future hassles. (Dealers can assist with procedures like paying purchase tax, insurance, vehicle and vessel tax, and license plate registration.) New cars must have third-party liability insurance (covering repair costs, medical expenses, and property damage for the other party in an accident) for effective protection. 7. Paying vehicle purchase tax and vehicle and vessel tax: These are handled at the local transportation bureau. For domestic cars, the tax is 10% of the car price; for imported cars, it is 10% of the duty-paid price. Individuals pay in cash, while companies can use bank checks. The formula for the purchase tax is: tax amount = car price / 1.17 × 10%. 8. Obtaining a temporary movement permit: Before getting the official license plate, a temporary movement permit is required for the car to be driven on the road. The permit must be displayed prominently on the front windshield. 9. Vehicle inspection: New cars must pass an inspection at a designated testing center before receiving the license plate. The inspection includes appearance and exhaust checks. Required documents include the owner’s ID, stamped purchase invoice, and vehicle qualification certificate (for imported cars, additional documents like the inspection certificate and import permit are needed). Note: Before the inspection, ensure the car has fuel and water and is in good condition for driving, avoiding high speeds during the initial break-in period. Obtaining the license plate: Within five working days after the inspection, collect the license plate from the local vehicle management office, along with the temporary driving permit and inspection sticker. Private license plates must be collected by the owner in person. Required documents include the original and copy of the purchase invoice, vehicle qualification certificate, insurance documents, and other relevant paperwork. Fees include license plate fee (154 yuan), registration fee (500 yuan/car), photography fee (40-70 yuan/car), and other service charges. Paying road maintenance fees, registration, and obtaining the vehicle license: a. After completing the above procedures, pay the road maintenance fee at the local road maintenance fee collection office. The standard fee for cars is 22 yuan/month per seat. b. Register the new car at the local traffic brigade or safety committee. (Note: Company vehicles are registered collectively at the local traffic brigade; private vehicles are registered at the traffic brigade corresponding to the owner’s driving license or vehicle registration address. Black license plate vehicles are handled at the foreign affairs section of the local vehicle management office.) c. Obtain the vehicle license at the same vehicle management office where the license plate was issued. Required documents include the temporary driving permit, road maintenance fee payment receipt, and registration documents from the safety committee.
Was this review help?
10
1
Share
SanMackenzie
08/10/25 3:00pm
I remember buying a brand-new car last week, and the whole process was quite interesting. It started with researching models online, spending several days reading various reviews and comparing prices before settling on a fuel-efficient compact SUV. My budget was strictly under 150,000 yuan, with monthly payments around 2,000. During test drives, I visited three dealerships to experience how each car handled in both city and highway driving, while also testing the audio system and seat comfort. A friend helped me negotiate the price, and we managed to bring it down from the initial quote to 128,000 yuan, saving 5,000 yuan. For financing, I applied for a low-interest auto loan, and the paperwork was signed quickly. On the day of pickup, I inspected the exterior paint, tires, and interior functions to ensure everything worked properly before driving it home, also taking care of insurance and temporary plates. The whole process took two weeks—not overly complicated, but required attention to avoid hidden fees.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

Should the Positive or Negative Terminal Be Removed First When Disconnecting a Car Battery?

Remove the negative terminal first. Below are the relevant steps for battery removal: 1. Before replacing the battery, check if it is completely depleted. If the battery is cracked, replace it immediately. If not, inspect both terminals first. Sulfate buildup can corrode the battery terminals. Use a brush dipped in a mixture of baking soda and water to clean them. 2. Turn off the engine before replacement. Carefully loosen the battery screw connected to the negative terminal with a wrench and remove the cable clamp from the terminal. Repeat the same process for the positive terminal. Firmly grasp the battery and remove it from the vehicle. After removal, clean the clamps and battery tray with soda water. 3. During installation, carefully place the new battery in the battery tray. Ensure the positive and negative terminals are correctly positioned, then secure the battery by tightening the bracket. Attach the cable clamps to the positive and negative terminals. Finally, close the hood.
20
4
Share

What is the bulb model for Wuling Hongguang S headlights?

Wuling Hongguang S headlight bulb models: low beam uses H1, high beam uses H7. When replacing bulbs, please note the following two points: 1. The engine must be turned off for 5 minutes before replacing bulbs. 2. Gloves and protective goggles are required. Use alcohol to wipe fingerprints or grease from the outer surface of the lamp housing. Never touch the glass surface of the bulb with bare hands to prevent shortening the bulb's lifespan due to fingerprints contaminating the glass housing. Below are some routine checks for vehicle lights: 1. Check if the front position lights, low beams, high beams, turn signals, hazard lights, and front fog lights are functioning properly. 2. Check if the rear position lights, license plate lights, rear fog lights, brake lights (including the high-mounted brake light, totaling 3), reverse lights, rear turn signals, rear hazard lights, and trunk light are functioning properly. 3. Check if the dashboard indicator lights, interior lights, air conditioning, radio, cigarette lighter, and door window lift indicator lights are functioning properly. 4. Check if the headlight beam is aligned correctly and adjust if necessary.
17
1
Share

What are the causes of idle vibration in new cars?

New car idle vibration can be caused by poor fuel combustion, insufficient ignition energy due to spark plug failure, air leakage in the intake system or low fuel pressure, poor fuel injector atomization, improper idle adjustment, malfunctioning idle control valve or bypass air valve, carbon buildup on valves and intake ports, etc. Here is the relevant content introduction: Intake manifold or various valve leaks. When unwanted air, gasoline vapor, or combustion exhaust enters the intake manifold, it can cause the air-fuel mixture to become too rich or too lean, leading to abnormal engine combustion. When the leakage affects only individual cylinders, the engine will experience more severe vibration, which has a greater impact on new car idle conditions.
6
2
Share

Is Engine Oil the Same as Transmission Fluid?

Engine oil and transmission fluid are not the same. Here are the relevant details: 1. Engine oil is the lubricant for the engine system, possessing properties such as oxidation resistance, wear resistance, and corrosion prevention. Transmission fluid, on the other hand, is primarily used to keep the gear system clean, ensuring the transmission operates normally and extending the lifespan of the transmission components. 2. Transmission fluid is an oil-based product designed to maintain the cleanliness of the gear system, ensuring proper transmission function and prolonging the service life of the transmission components. Most transmission fluids are compatible with automatic transmissions on the market. However, each automatic transmission design has unique technical requirements. Even the same model of transmission configured in different vehicle models may differ in torque, weight, speed, and structure. Therefore, manufacturers specify their own dedicated transmission fluid. Different transmission fluids can significantly impact shift quality.
11
2
Share

Where is the sunroof button on the Mercedes-Benz E300L?

The sunroof button of the Mercedes-Benz E300L is located at the position of the front reading light, which is directly above the center console. The button is of a push-pull type. To open the sunroof, pull the button backward once. To close the sunroof, push the button forward once. The following is an introduction to the Mercedes-Benz E300L model: 1. All functions of the Mercedes-Benz E300L are controlled via buttons on the steering wheel. 2. The Mercedes-Benz E300L is a specially extended version designed for the Chinese automotive consumer market. It is a domestically produced Mercedes-Benz, with the extended wheelbase entirely aimed at meeting the needs of Chinese consumers. 3. The 2019 Mercedes-Benz E300L was launched in two models: a Sport Fashion version and a Sport Luxury version.
18
4
Share

How to Close the Engine After It's Opened?

Closing the car engine hood involves the following steps: 1. After propping up the hood, remove the hood support rod and place it in its fixed position. 2. Release the engine hood support rod and use both hands to slowly lower the hood. When the hood is about 20cm from the closing point, let go and allow it to fall freely. Avoid using one hand or one side to close the hood, as this may cause uneven gaps on both sides. 3. After closing the engine hood, carefully check to ensure it is properly closed. If you notice large gaps around the hood, it indicates it is not fully closed, and you should press down with your hand to secure it completely.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.