What is the process for withdrawing from driving school?

2 Answers
DiEdward
08/31/25 2:57am
Process for withdrawing from driving school: The applicant should go to the local vehicle management office to fill out the "Motor Vehicle Driver's License Business Withdrawal Application Form" and submit their original ID card and a copy. After the application is reviewed and meets the requirements, the applicant should submit the original application form and a copy of the relevant identification documents to the acceptance counter at the city vehicle management office for processing the withdrawal. The following is an introduction to the driving school examination subjects: 1. Subject 1: The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. 2. Subject 2: This is the abbreviation for the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). 3. Subject 3: This is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. 4. Subject 4: Also known as the Subject 4 theory test or driver's theory test, it is part of the motor vehicle driver's license assessment.
Was this review help?
1
5
Share
McStella
09/12/25 6:25am
My friend just went through the process of dropping out of driving school. The first step is to quickly go to the front desk of the driving school to fill out a withdrawal application form, clearly stating the reason for withdrawal. Then, you have to wait for the driving school to review it, which usually takes two or three days. After the review, the driving school will deduct fees based on the stage you've reached in your training—like whether you've taken the theory test (Subject 1) or how many driving lessons you've completed—from the registration fee, covering material costs, administrative fees, and the cost of lessons already taken. Finally, you'll sign a refund agreement, and it takes about ten days to half a month for the money to be returned to your card. Remember to bring your ID card and the original registration receipt; some driving schools may require copies. You also need to go to the vehicle management office to complete the cancellation process, which can be quite time-consuming. It's best to decide to drop out before starting driving lessons to save some money.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure on a Land Rover Range Rover?

Method to reset the tire pressure on a Land Rover Range Rover: First, adjust the tire pressure to light load in the settings on the dashboard. After setting it to light load, inflate the front tires to 2.3 bar and the rear tires to 2.5 bar. Then drive for a while. If no fault is reported, the tire pressure is normal, and the reset is complete. The Land Rover Range Rover has a length of 5000 mm, width of 2073 mm, height of 1869 mm, wheelbase of 2922 mm, front track of 1693 mm, rear track of 1685 mm, and minimum ground clearance of 220 mm. It is a mid-to-large SUV equipped with full-time four-wheel drive.
15
4
Share

What does a faucet symbol in the car indicate?

A faucet symbol in the car indicates the engine malfunction indicator light. When this light illuminates, it signifies that the engine has encountered a fault. If the engine malfunction light comes on while driving, it is likely due to poor combustion conditions in the engine, which may result from issues such as engine knocking or carbon buildup. This could be caused by the use of low-quality fuel or internal engine contamination, leading to the illumination of the engine malfunction light. Once the engine malfunction light is on, it will not disappear automatically. The engine fault signal is emitted by the ECU (Engine Control Unit), which controls all the electronic components of the engine. When the engine malfunctions, components such as the electronic throttle, fuel injectors, alternator, and fuel pump may be affected, causing the engine to operate abnormally.
7
4
Share

Will I get points deducted for driving at 50 in a 30 speed limit zone?

Driving at 50 in a 30 speed limit zone will not result in points deduction. According to the guidelines on traffic violations, driving a motor vehicle in violation of speed limits without causing any consequences will result in a warning from the traffic management department of the public security authorities: 1. Exceeding the speed limit by less than 50% on roads with a speed limit below 60 kilometers per hour; 2. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous chemical transport vehicles at speeds exceeding the limit by less than 10% on roads other than highways or urban expressways; 3. Driving vehicles other than medium-sized or larger passenger or cargo vehicles, school buses, or hazardous chemical transport vehicles at speeds exceeding the limit by less than 10%; 4. Driving a motor vehicle on a highway at a speed less than 20% below the prescribed speed limit.
3
3
Share

How to Determine When Car Brake Pads Need Replacement

Methods to check if car brake pads need replacement: 1. The vehicle dashboard has a brake pad wear limit warning light; generally, when this light comes on, it reminds the owner to replace the brake pads. 2. The thickness of brake pads is between 1 to 1.5 cm (may vary by manufacturer). When the wear thickness is less than 3 mm, the brake pads should be replaced promptly. 3. If there is brake caliper leakage, contaminating the brake pads and soaking into them, and oil stains are still found after sanding with sandpaper, the pads must be replaced regardless of thickness. 4. A decrease in brake fluid in the brake fluid reservoir. 5. Hearing a squeaking sound when braking is a reminder for the owner to replace the brake pads promptly.
6
3
Share

What is the method for adjusting the height of car lights?

Method for adjusting the height of car lights: Low beam: Position the car vertically facing a wall, about 1 meter away. Adjust the low beams so that both lights are at the same height. Mark two focal points on the wall, with the distance between them approximately equal to the distance between the car's headlights. Slowly reverse the car and observe if the center points shift. Adjust so that the two points always align with the marks. High beam: Position the car vertically facing a wall, about 1 meter away, ensuring both lights are at the same height. Mark two focal points on the wall, with the distance between them approximately equal to the distance between the car's headlights. Slowly reverse the car and adjust so that the two points gradually converge towards the center. At a distance of about 30 to 100 meters, they should merge into a single point. High beams can focus more intensely at 30 to 100 meters, illuminating farther distances with less divergence.
4
5
Share

How many chances are there for each driving test subject two exam?

Each driving test subject two exam has five chances, including one initial exam and one make-up exam on the spot if failed, totaling up to 10 exam opportunities. According to traffic laws, if an applicant cannot attend the exam at the scheduled time, they must apply to cancel the appointment one day in advance. Subject two, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. The C1 and C2 car test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. Subject two has a full score of 100 points, with evaluation criteria set for disqualification, deduction of 20 points, deduction of 10 points, and deduction of 5 points.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.