What is the process for the Subject 3 mock driving test?

How to Handle Sudden Vehicle Stalling

Methods for handling sudden vehicle stalling: For automatic transmission vehicles, when stalling occurs, firmly grip the steering wheel with your left hand to stabilize direction (since power steering is lost, significant force is required). Simultaneously, press the brake pedal hard with your right foot to reduce speed as much as possible, then quickly shift the AT gear to N position. For manual transmission vehicles, thoroughly clean the entire fuel system including injectors, throttle body, and fuel tank. The primary causes of stalling are: 1) Use of substandard fuel leading to engine carbon buildup, or 2) Poor-quality fuel containing excessive gums/residues causing fuel line blockages and supply issues. If stalling occurs during idle, simply cleaning the idle air control valve should resolve the issue.

20

0

Share

Can Modified Front and Rear Bumpers Pass Vehicle Inspection?

Modification of front and rear bumpers on a vehicle must be approved by the vehicle management office beforehand. Only modifications with proper approval and documentation can pass the annual inspection. Unauthorized modifications without proper documentation will fail the inspection, and the vehicle must be restored to its original condition to pass. Legal regulations impose the following restrictions on vehicle modifications: 1. The vehicle model, engine model, and frame number cannot be altered; 2. The vehicle structure must not be damaged; 3. Changes to the vehicle's color, engine, body, or frame must be inspected; 4. Replacement of the engine, body, or frame requires submission of a motor vehicle safety technical inspection certificate; 5. If decals cover more than 30% of the vehicle's total surface area, approval from relevant authorities is required; 6. The vehicle's appearance cannot be significantly altered and must remain largely consistent with the photo on the vehicle registration certificate.

18

0

Share

Should the Skoda Karoq Use 92 or 95 Octane Gasoline?

According to the official vehicle manual recommendation, the Skoda Karoq should use 92 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, the Skoda Karoq's fuel cap also indicates the recommended octane rating. Typically, the choice of gasoline grade can also be determined by the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade. High compression ratio engines can still be tuned to use lower octane gasoline due to other influencing factors such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Skoda Karoq occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the actual experience being poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane number, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

7

2

Share

How to Remove Car Paint?

For minor paint spots, you can use specialized cleaning agents and car polishing wax to remove them yourself. First, spray the cleaning agent on the paint spots and wipe repeatedly with a soft cloth. Then, shake the polishing wax well and apply it to the paint surface, leaving it for 60 seconds before manually polishing. For larger areas of paint, it is recommended to visit a professional detailing shop for polishing treatment to minimize damage. Polishing is a method that uses polishing wax and a polishing machine to remove surface scratches and rough areas from the car paint. The coarseness of the polishing wax used depends on the extent of the paint damage. For example, sand wax has coarser particles and is used to remove thicker paint spots, but it can cause more significant damage to the car paint.

20

3

Share

How to Adjust the Windshield Washer Spray Height?

The method to adjust the windshield washer spray height: Use a pin to gently lift the spray nozzle upward for adjustment, slowly adjusting the height and angle of the spray nozzle back and forth until it is suitable. Generally, the wiper blades will show wear after about one or two years of use and need to be replaced accordingly. When replacing, pay attention to the fixing interface form of the wiper blades on the wiper; otherwise, they cannot be installed and used. The wiper, also known as the windshield wiper, is a device used to wipe away raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and enhance driving safety.

15

5

Share

How to Turn On the Fog Lights on the Qashqai?

The fog light switch of the Qashqai is located on the rotary knob to the left of the steering wheel. Turn the knob to the third position on the right side. Push the knob forward one position to turn on the front fog lights, and pull it back one position to turn them off.

9

0

Share

What is the process for the Subject 3 mock driving test?

How to Handle Sudden Vehicle Stalling

Can Modified Front and Rear Bumpers Pass Vehicle Inspection?

Should the Skoda Karoq Use 92 or 95 Octane Gasoline?

How to Remove Car Paint?

How to Adjust the Windshield Washer Spray Height?

How to Turn On the Fog Lights on the Qashqai?

Can New Energy Vehicles Not Use Green License Plates?

What are the symptoms of a broken supercharger?

Does the Panamera Have a Five-Seat Version?

How to Activate the Cruise Control on the New X-Trail?