What is the process for resetting the tire pressure monitoring system on the Envision?
1 Answers
The method for resetting the tire pressure monitoring system on the Envision: Start the vehicle, locate and press the SET button on the left side of the multifunction steering wheel, then confirm the operation by pressing the checkmark button on the right side of the multifunction steering wheel. Once successfully matched, the tire pressure display on the central instrument panel will return to normal. There are three common types of tire pressure monitoring systems: Direct TPMS: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via wireless transmitters, and the tire pressure data is then displayed. The system automatically alerts when tire pressure is too low or when there is a leak. Indirect TPMS: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of tires to monitor pressure. Tire Pressure Monitoring System (TPMS) introduction: This system combines the advantages of both the above systems. It is equipped with direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only direct systems, this hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data of the actual pressure in all four tires as effectively as a direct system.
