···
Log in / Register

What is the process for renewing a driver's license at the Minhang District Vehicle Management Office?

4 Answers
LaAliyah
07/29/25 11:09am
Below is the process for renewing a driver's license at the Minhang District Vehicle Management Office: 1. The motor vehicle driver or their agent should bring the required materials to the acceptance window of the Vehicle Management Office branch or the driver management window of the traffic police detachment (brigade) in each district (county) to complete the renewal procedure for an expired motor vehicle driver's license, while also undergoing verification. 2. When renewing an expired driver's license, drivers of large buses, tractors, city buses, medium-sized buses, and large trucks who had no demerit points at the time of renewal but accumulate points before the end of the current scoring cycle must also undergo verification as required. 3. If applying for a renewal at a Vehicle Management Office other than the one that originally issued the driver's license, the transfer procedure must be completed as required. Please proceed to the acceptance window of the Vehicle Management Office branch for processing.
Was this review help?
14
3
Share
MaddoxFitz
08/13/25 5:43pm
I just went to the Minhang District Vehicle Management Office last month to renew my driver's license. The address is near No. 123 Gudai Road, and the location is quite easy to find. I booked an appointment in advance on WeChat to save time. The process is as follows: first, bring the original and photocopy of your ID card, the original driver's license, a 1-inch white-background photo (must have a receipt), and a medical examination certificate (issued by a hospital). Then, go to the site to fill out the application form and submit the materials. After queuing to get a number, the staff will check everything. If there are no issues, you'll pay around ten yuan, and wait about half an hour to receive the new license. The whole process took less than two hours. It's recommended to book in advance to avoid crowds during peak hours. Driving feels more secure after renewal, and remember to complete the medical examination two days in advance to prevent it from expiring.
Was this review help?
2
0
Share
Expand All
McAna
10/08/25 2:41am
As a veteran taxi driver with years of experience, I'm quite familiar with the license renewal process. The Minhang District Vehicle Management Office is located near Gudai Road, though I'm not sure of the exact address but it's easy to navigate to. The basic procedure includes preparing materials: photocopy of ID card, photo receipt, and health certificate are essential. On-site, you'll first queue up, fill out a form for review, then pay the fee and wait for the new license. I recommend avoiding weekends or the busy afternoon peak hours; going on a weekday morning means fewer people and you can finish in about half an hour. If any materials are missing, you'll have to make a second trip, which is quite annoying. The cost is low, just over ten yuan, and after getting the new license, remember to update the insurance information on your vehicle.
Was this review help?
7
1
Share
Expand All
DelIvan
11/21/25 4:01am
I am an ordinary citizen living in Minhang, and renewing my driver's license is quite simple. The district vehicle management office is located near Gudai Road. Just bring your ID card, photos, and medical examination certificate. Fill out the form on-site, pay the fee, and receive your new license—the whole process takes just over an hour. A reminder: make sure your photos come with a receipt and that your medical examination is not expired to avoid having to redo it. It goes much faster when there aren't many people.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What is a Manual-Automatic Transmission Car?

A manual-automatic transmission car refers to a vehicle that perfectly combines manual shifting and automatic shifting. The relevant introduction about manual-automatic transmission cars is as follows: Basic Introduction: A manual-automatic transmission car is a vehicle equipped with a "manual-automatic" transmission. This type of transmission combines both manual and automatic shifting modes, and such transmissions typically feature prominent +/- indicators. Advantages: Proper use of the gear limiter can reduce the frequency of gear shifts. Automatic transmissions often have an "OD" (Overdrive) button on the shift lever or panel. Pressing the OD button prevents the transmission from shifting into the highest gear. To achieve fuel efficiency and smooth driving, automatic transmissions tend to use the highest gear whenever possible. However, in urban driving conditions with heavy traffic and slow speeds, frequent acceleration and braking are often required. During acceleration, the transmission downshifts to a lower gear for better performance, and when decelerating, it upshifts for smoother operation. This frequent gear shifting not only disrupts smooth driving but can also affect the transmission's lifespan over time.
16
4
Share

What Are the Correct Methods for Depressing the Clutch While Driving?

Here are the correct methods for depressing the clutch while driving: 1. The correct way to depress the clutch is to use the ball of your foot with your left heel as the pivot point; 2. When starting the car: Quickly depress the clutch fully, then rapidly release it to the semi-engaged state while slightly pressing the accelerator to increase engine speed, then gently lift the clutch slowly, pausing slightly when reaching full engagement; 3. When downshifting: First reduce the car's speed until it reaches the appropriate speed for downshifting, then quickly depress the clutch and follow the "fast-slow-engagement" principle to control the clutch; 4. When upshifting: Increase the accelerator to raise engine speed, then quickly depress the clutch and gently release it slowly, you may slightly press the accelerator during the release process; 5. When stopping the car: Depress the clutch when the speed drops below 15KM/H, then use the brake to stop the vehicle completely, and slowly release the clutch after coming to a full stop.
20
2
Share

How many liters of fuel are left in the last bar of the Geely Emgrand?

Geely Emgrand has a fuel tank capacity of approximately 55 liters. When only the last bar remains, it can generally hold around 45 to 48 liters of gasoline. Exterior design of the Geely Emgrand: The model features a return-style grille paired with headlights on both sides, complemented by chrome-plated horizontal bars below for decoration. Combined with the fog lights on both sides, it creates a layered effect. The side waistline adopts a rising design, with the body tilting forward to give a sense of dynamism. The zigzag-style taillights connect with the side waistline, while the taillights are directly linked by chrome-plated horizontal bars. Powertrain of the Geely Emgrand: The Geely Emgrand is equipped with a 1.5L inline four-cylinder naturally aspirated engine, delivering a maximum output of 109 horsepower and peak torque of 140N·m. It is paired with either a 5-speed manual or 6-speed CVT transmission, achieving a fuel consumption of around 5.7L per 100 kilometers. With a full tank, it can travel up to 900 kilometers.
6
2
Share

Reasons for Engine Seizing and Failing to Start

Reasons for engine seizing and failing to start are as follows: 1. Electrical or electronic failure. Electrical failures include: blown fuse, open circuit in high-voltage coil, open circuit in low-voltage circuit, detached central ignition wire, distributor rotor leakage, damaged spark plug; electronic failure mainly refers to the malfunction of the central computer control board. 2. Fuel system failure. Possible locations of fuel system failure: fuel pump failure, blocked fuel line, clogged fuel filter, carburetor failure, damaged injector, etc. 3. Mechanical failure. Common mechanical failures: timing belt (chain) breakage, cylinder leakage with no pressure, etc.
6
1
Share

Where is the one-third position of the hood?

The one-third position of the hood is approximately 10~15 cm away from the headlights. More information about the hood is as follows: 1. The hood is made of rubber foam and aluminum foil materials. 2. While reducing engine noise, it can also isolate the heat generated during engine operation, effectively protecting the paint surface on the hood and preventing aging. 3. The exterior design of a vehicle is a visual representation of its value. As an important component of the overall appearance, the hood plays a crucial role and can reflect the concept of the entire car.
15
2
Share

What to Do When Your New Car Gets Hit and Becomes a Totaled Vehicle?

After a new car is hit by another party and becomes a totaled vehicle, the owner has the right to demand compensation from the at-fault party for repair costs, loss of items in the vehicle, towing fees; for commercial vehicles, compensation should cover lost income during downtime, while for non-commercial vehicles, reasonable transportation expenses during the period the vehicle is unusable should be reimbursed. The handling steps are as follows: Document the vehicle damage: Carefully inspect the vehicle's condition, preferably carrying a device with photo-taking capabilities to record the scratched areas and overall vehicle status. When taking photos, ensure both parties are present in the frame, and capture multiple angles of the front, rear, and damaged sections of the vehicle. Record basic information: Document the details of both vehicles and their owners, including license plate numbers, driver's licenses, and vehicle registration certificates. Clarify liability determination: Pay special attention to the responsibilities assigned by traffic police during the liability assessment. Common scenarios include: failure to maintain a safe distance, where the rear vehicle is responsible for a rear-end collision; lane changes by a motor vehicle that disrupt normal traffic flow, where the lane-changing party is responsible; at signal-controlled intersections, turning vehicles failing to yield to through traffic. Vehicle damage assessment and claims: First, take the vehicle to an insurance claims service center for damage assessment. During subsequent repairs, keep all repair invoices.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.