What is the process for quick handling of traffic accidents?

2 Answers
OHarmony
07/24/25 12:35pm
After an accident occurs, call the police to report the situation. Take photos of the scene, check the other party's driver's license and vehicle registration, exchange contact information, and both parties should quickly leave the scene to restore traffic. Below is a detailed introduction to the accident handling process: 1. Report to the police: After a traffic accident occurs, the involved parties should first turn on the vehicle's hazard warning lights to alert following vehicles and avoid secondary accidents. If special circumstances prevent the involved parties from moving the vehicle, they should quickly call the police. 2. Collect evidence: After taking photos of the accident scene, the involved parties should move their vehicles to another location to avoid obstructing traffic. 3. Negotiate: Both parties agree to reach a settlement, and the accident mediator will prepare and issue a damage compensation mediation agreement. 4. Restore traffic: After photographing the scene or marking the parking position to preserve relevant evidence, move the vehicles to a location that does not obstruct traffic and wait for further handling.
Was this review help?
6
2
Share
IsabellaRose
08/11/25 6:42am
As an experienced driver with years behind the wheel, I've got the accident quick-handling procedure down pat. When an accident occurs, immediately stop the car and turn on hazard lights, then place a warning triangle 50-100 meters behind the vehicle to prevent rear-end collisions. Check for injuries to yourself and others - call 120 immediately if anyone's hurt; if all's stable, dial 122 to report to police. Then exchange and photograph each other's name, phone number, license plate, driver's license, and insurance policy for documentation. I use my phone to comprehensively photograph the accident scene - vehicle positions, damage details, and road conditions must all be clearly recorded. For minor fender benders, move vehicles to a safe area and fill out a quick settlement agreement or use an app for online processing. Don't block traffic and inconvenience others - the quick settlement process saves time and reduces disputes. I often remind new drivers to develop this habit, as proper attention to detail makes subsequent procedures much easier.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

How Many Chances Are There in One Driving Test for Subject 3?

There are 2 chances for Subject 3. Below are the relevant details: Retake: According to the requirements of the Ministry of Public Security for driver tests, each student has two test opportunities per appointment. If the first test is failed, an immediate retake is allowed. During the first test, students need to participate in a vehicle inspection walk-around and a nighttime light simulation. If the first test is failed, the second retake does not require the vehicle inspection walk-around or light simulation. After preparation, the second test can begin directly. Notes: If the first test is failed, the test items in the parking area will start after completing the walk-around. The starting point of the test can be at any location on the test route. Finally, students must complete all 16 test items before ending the test and uploading the results.
18
2
Share

Is Insurance More Expensive for Transferred Vehicles?

Insurance for transferred vehicles is indeed more expensive. Here are the relevant details: Reason: The performance of used cars decreases significantly compared to new cars, and in the event of an insurance claim, the losses incurred are greater than with new cars. According to the calculation rules of insurance premiums, used cars have higher insurance costs, and the price condition of the used car also affects the insurance cost. The higher insurance price is mainly due to the greater number of insurance types involved in vehicle transfer. Notes for purchasing insurance for transferred vehicles: If the car is a transferred vehicle, do not continue to purchase insurance from the previous insurance company. You can switch to another insurance company, preferably one with lower premiums, to reduce the insurance cost.
15
5
Share

Can a Sedan Tow a Motorcycle?

Small passenger vehicles are permitted to tow motorcycles weighing less than 700 kilograms, and the motorcycle must not carry any passengers other than the rider. Below are the relevant regulations: Regulations: According to Article 56 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Motor vehicles towing trailers must comply with the following provisions: Trucks, semi-trailer tractors, and tractors are only allowed to tow one trailer. The lighting signals, brakes, connections, safety protections, and other devices of the trailer must comply with national standards; Small passenger vehicles are only allowed to tow travel trailers or trailers with a total mass of less than 700 kilograms. Trailers must not carry passengers; The load capacity of the trailer towed by a truck must not exceed the load capacity of the truck itself. Precautions: Large and medium-sized passenger vehicles, low-speed trucks, three-wheeled vehicles, and other motor vehicles are not allowed to tow trailers.
5
2
Share

Does a slight bulge on the side of a tire affect safety?

Tire sidewall bulges slightly affect safety. Here is the relevant introduction: Reasons: Because a car tire bulge indicates that the internal cord is broken, and the cord layer is the skeleton of the tire. When the cord breaks, only the rubber is left to prevent gas from escaping. In addition, the sidewall is inherently weak. When the tire pressure is too high, the bulging area is prone to rupture. Causes of tire sidewall bulges: When the tire pressure is too high, bulging is more likely to occur; when the tire pressure is too low, the wheel rim impacts the ground, which can also cause bulging. Uneven road surfaces, leading to frequent impacts between the tire and the ground or obstacles, can also cause tire bulging. Scraping the tire against the curb is also extremely damaging to the tire and can easily lead to bulging.
16
2
Share

How Many Liters of Oil Are Between the Minimum and Maximum Marks on the Dipstick?

Automobile oil dipsticks generally indicate a range of 1.5L of oil from the upper to the lower limit. Here are the relevant details: Oil Dipstick: In automobiles, the oil dipstick is a commonly used measuring tool to check the quantity of lubricating oil in the reservoir. Due to the curved path of the dipstick insertion hole, the dipstick must be able to deform when inserted and rebound to its original shape when pulled out. Location of the Oil Dipstick: The oil dipstick is usually located near the engine and is easily identifiable by its pull ring. The tail of the dipstick is marked with MAX (upper limit) and MIN (lower limit) indicators. When the oil level falls below the minimum mark, there is still some oil remaining in the reservoir, but this serves as a reminder to the owner that it's time to top up the oil. Of course, it is advisable to visit a 4S shop as soon as possible or to add oil yourself.
14
2
Share

What brand is prtechdsu02 tire?

prtechdsu02 is not a tire brand. Protech is a product under Viking Tires, a sub-brand of Continental Tires. Below are the relevant details: Launch time: The Protech product was first introduced in the European market in 2014. Currently, only one product is available, the Protech-PT5. This Protech-PT5 focuses on quietness, anti-stone drilling, and handling performance. Technologies used: Protech employs computer-optimized design of tread block circular notches to coordinate the contact edges, preventing noise generation and propagation, effectively reducing tire noise levels. It features longitudinal grooves with a conical design to minimize stone retention during driving, and a 3D design that helps the tire automatically expel stones, protecting it from stone drilling damage. The tread center utilizes continuous ribs, while the outer zones incorporate a dual-rib design. Grooves on both sides are embedded with interlocking rubber pillars, significantly enhancing tread rigidity and achieving responsive handling.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.