What is the process for picking up a new car?

2 Answers
DiAlex
07/28/25 3:19pm
ID card, for those who need a loan, print a car pickup letter and check the arrival of the final payment. Inspect the exterior of the car, including the body paint, window glass, tires, trunk, engine operation, and chassis. Internal inspection items include the cleanliness of the interior, details and buttons on the dashboard, and mileage check. Finally, check the engine and transmission after starting the car.
Was this review help?
14
0
Share
DelVivienne
08/11/25 10:52pm
I just picked up my new car recently, and the whole process went quite smoothly. The first step is to bring your ID card and bank card to the 4S dealership. The salesperson will first have you inspect the car: walk around the body to check for scratches or dents, examine the tire production date and whether the tread hairs are intact, open the doors to test the seat adjustments and the responsiveness of the infotainment screen. Then, start the engine to listen for smooth operation and check the dashboard for any warning lights. After that, sign the car purchase contract and delivery checklist, verifying that the VIN matches the documents. Finally, pay the remaining balance and receive the keys. The salesperson will teach you basic operations like adjusting the mirrors and locating the fuel filler cap. Before leaving, don’t forget to take the warranty certificate and spare key. It’s recommended to pick up the car during the day for better visibility.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What Causes the Noise in Car Window Regulators?

The noise in car window regulators may be caused by aging window seals or abnormal sounds from the window lifting mechanism. There are sealing strips at the bottom of the door windows. If these strips age, the friction between the strips and the window increases, leading to noise when raising or lowering the window. The car body has many sealing strips, and these rubber components can deteriorate over time. When maintaining your car, attention should be paid to the care of these rubber parts. If the sealing strips are no longer effective, they should be replaced promptly, as poor sealing may allow rainwater to leak into the car during rain.
20
3
Share

Why is there a section in the middle that the new wiper can't reach?

New wipers may fail to reach a section in the middle due to oil film on the windshield. If it's a beam-type wiper, the issue might be insufficient pressure from the wiper arm, preventing the wiper from fully extending. It is recommended to replace the spring strip on the wiper arm or switch to a triple-section wiper. Many car owners neglect proper windshield cleaning during routine car washing and maintenance, leading to dirt and deposits on the windshield that reduce its smoothness. A wiper is a blade structure installed in front of the windshield, consisting of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly, primarily used to clear rain, snow, and dust that obstruct visibility on the windshield.
1
4
Share

How many cylinders does the T77 engine have?

T77 is equipped with the CA4G12TD Blue Road series 1.2T inline four-cylinder turbocharged engine, independently developed by FAW Group. The same engine is also used in the Junpai series models. The engine technology includes direct injection, DVCT, etc., with a maximum power of 105 kW and a peak torque of 204 Nm. The Besturn T77 is a compact SUV under FAW Besturn, featuring a MacPherson independent front suspension and a torsion beam non-independent rear suspension. In terms of body dimensions, the car measures 4525mm in length, 1845mm in width, and 1615mm in height, with a wheelbase of 2700mm.
18
1
Share

How to Solve the Abnormal Noise When Car Windows Are Raised or Lowered?

Solutions for abnormal noise when car windows are raised or lowered include: 1. Tighten loose door glass at a professional repair shop; 2. Replace the sealing rubber strip of the window glass; 3. Clean debris from the guide rails. Car windows are an essential part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. They are categorized into front and rear windshields, ventilation windows, heat-insulating side windows, and sunroofs. The causes of abnormal noise when car windows are raised or lowered are: 1. Loose fastening screws inside the window glass or the lifter bracket; 2. Aging sealing rubber strips of the window glass; 3. Debris in the window glass guide rails.
8
1
Share

How often should the spark plugs be replaced on a Mazda Axela?

Mazda Axela's spark plugs should be replaced every 40,000 kilometers, using genuine Mazda brand parts. The function of spark plugs is to discharge the high-voltage pulses delivered by the ignition wires, creating an electric spark that ignites the air-fuel mixture in the cylinder by arcing across the gap between the two electrodes. The Axela is a compact car produced by Changan Mazda, featuring a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with two Skyactiv-G gasoline engines. In terms of dimensions, the car measures 4662mm in length, 1797mm in width, and 1445mm in height, with a wheelbase of 2726mm. It is a four-door, five-seater sedan.
12
0
Share

Are the front and rear tires of a motorcycle the same?

No, they are not the same. The front tire is larger, while the rear tire is smaller. Below is a related introduction to tires: Introduction: Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are typically installed on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance. Function: Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning ability. Additionally, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant demand for rubber in tire manufacturing.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.