What is the process for obtaining a driver's license?

How Many Liters of Engine Oil Does a Jetta Need?

Jetta Engine Oil Capacity Introduction: The Jetta requires approximately 4 liters of engine oil. The exact amount may vary slightly depending on the level of emissions. The Jetta can use 5W-40 or higher-grade engine oil. Engine oil serves multiple functions for the engine, including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Below are the detailed introductions: 1. Lubrication and Wear Reduction: A sufficiently thick oil film separates the surfaces of relatively sliding components, such as between the piston and cylinder, and between the crankshaft and bearings. To prevent excessive wear, an oil film must be established between these sliding surfaces. 2. Auxiliary Cooling: During engine operation, engine oil carries heat back to the oil pan, where it dissipates into the air, assisting the radiator in cooling the engine. However, the primary cooling effect comes from the water outside the engine block. 3. Sealing and Leak Prevention: Engine oil forms a seal between the piston rings and piston, reducing gas leakage and preventing contaminants from entering. 4. Rust and Corrosion Protection: Lubricating oil adheres to component surfaces, preventing contact with water, air, acidic substances, and harmful gases. 5. Shock Absorption: When pressure in the engine cylinder rises sharply, the load on the piston, piston rings, connecting rod, and crankshaft bearings increases suddenly. This load is transmitted and lubricated through the bearings, cushioning the impact load.

11

4

Share

What to do if the button on the back of the ETC device is accidentally pressed?

If you accidentally press this small button, you need to go to the ETC service provider to reactivate it. The small button on the back of the ETC device is an anti-tamper button, designed to prevent the ETC device from being used interchangeably between multiple vehicles. Here are some relevant details: 1. ETC Application: ETC is an electronic toll collection system. Drivers who frequently use highways can apply for it, and many banks offer free ETC services. When driving on highways, there are dedicated ETC lanes. If your vehicle is equipped with an ETC system, you can directly use these lanes without stopping to pay tolls. 2. Precautions: When not using the ETC, you can remove the card to prevent unauthorized transactions by criminals. ETC devices are solar-powered, so after installation, ensure that sunlight can reach the solar panel.

18

0

Share

How long does it take to receive a notification for running a red light?

Generally, you can receive an SMS notification within 3 to 7 days after running a red light. If you haven't received a message after 7 days, you can wait a bit longer, as it takes time to collect, organize, review, input, and transmit the data from the occurrence of the violation to its entry into the system. Typically, the latest you should receive a notification is within 15 days. If no SMS is received after 15 days, it means there is no violation record. Criteria for determining a red-light violation: Electronic cameras capture three photos of the vehicle's movement as evidence for determining a red-light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will the vehicle be deemed to have run a red light. Ways to check for red-light violations: You can check for red-light violations via the "Traffic Management 12123" app. After opening the app, log in using your ID card, then locate and click on the "Violation Handling" option. Under this section, you can view the current status of your vehicle. If there is a violation, the specific details will be displayed. Visit the service halls of the traffic police branches in various cities and districts to check via touchscreen terminals. Log in to the external service websites of the Public Security Traffic Management Bureau of each city: find the "Vehicle Violation Inquiry" section, enter your license plate number and vehicle engine number, then click "Query."

4

0

Share

Does S Stand for Provincial Highway?

S stands for provincial highway, while G represents national highway. Related Introduction: 1. Overview: In China, road numbering rules are primarily categorized into three levels based on their administrative hierarchy: national highways (including national trunk highways), provincial highways, and county roads. The initial letters of the Chinese words for 'national,' 'provincial,' and 'county'—G, S, and X—serve as their respective identifiers, combined with numbers to form the numbering system. A highway route number consists of a one-letter administrative level code followed by three digits. 2. Differences: On road signs, those with a red background indicate national highways, while those with a yellow background signify provincial highways. National highways are major arterial roads with national political and economic significance, connecting large and medium-sized cities across the country and forming the backbone of the national highway network. The numbering of national highways begins with the letter G.

14

4

Share

The Symbol for No Engine Oil

The engine oil symbol in a car resembles a kettle, and this indicator lights up in yellow. The most common reason for the engine oil light to flash is insufficient engine oil in the vehicle. Relevant information is as follows: 1. Introduction: When components in the oil system are damaged, the oil light will flash, which can prevent the car from operating normally. Generally, the quality of the engine oil also affects the car's normal use. If the oil quality is poor, the impurities in the oil will increase, affecting the car's normal operation. 2. Principle: A malfunction in the car's oil return valve can also cause the oil light to illuminate. During use, various components of the car will age. After the oil return valve's spring ages, the oil light will turn on. When the oil filter becomes clogged, it becomes difficult for the oil to maintain normal operation, leading to insufficient oil supply, and the oil warning light will illuminate.

18

5

Share

What is the button under the rearview mirror?

The button under the rearview mirror is the rearview mirror folding button. Function of the rearview mirror folding button: During vehicle use, minor scratches and bumps are inevitable. The rearview mirror increases the width of the vehicle, making it more susceptible to impact during collisions. Folding the rearview mirror can minimize the impact and avoid scratches caused by the rearview mirror. Method for adjusting the rearview mirror: Adjust the seat and sitting posture to choose a comfortable driving position. Adjust the rearview mirror according to the driver's sitting posture; the rear door handle should be in the center of the mirror. Adjust the interior rearview mirror to ensure that the horizon is visible in the center of the mirror while driving.

8

5

Share

What is the process for obtaining a driver's license?

How Many Liters of Engine Oil Does a Jetta Need?

What to do if the button on the back of the ETC device is accidentally pressed?

How long does it take to receive a notification for running a red light?

Does S Stand for Provincial Highway?

The Symbol for No Engine Oil

What is the button under the rearview mirror?

What is the standard width for parking lot lanes?

What is the fuel tank capacity of the 2013 Volkswagen Bora?

What is the minimum ground clearance of the 2018 Camry?

What is ABB in the automotive context?