What is the process for licensing a transferred vehicle?

What is the fuel tank repair project?

Fuel tank repair is a routine automotive maintenance project, typically including inspecting the fuel lines, servicing and cleaning the fuel tank, and replacing sealing oil-resistant gaskets at various locations. Below is relevant information: 1. Gasoline: Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through distillation and cracking, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C. 2. Fuel tank: A fuel tank is a container for holding fuel in aircraft or automobiles, serving as a specialized container in hydraulic systems for storing hydraulic oil or hydraulic fluid. Fuel tanks can be divided into two types: open tanks and closed tanks.

6

1

Share

Is It Normal to Drive 500 Kilometers on a Full Tank of Gas?

Generally speaking, driving 500 kilometers on a full tank is considered normal. Here are some tips to reduce fuel consumption: 1. Avoid prolonged engine idling: When parked and idling, the engine consumes significantly more fuel than during normal driving. Therefore, it's best to turn off the engine when the vehicle is not in use for extended periods, such as when waiting for someone. During cold starts, warming up the engine should not exceed one minute; maintaining a few minutes of low-speed driving is sufficient. 2. Maintain good driving habits: Smooth and gentle driving is the most fuel-efficient. During acceleration, avoid stomping on the accelerator. The correct method is to accelerate smoothly and maintain a steady speed once a certain velocity is reached. When driving in congested areas, always assess the road conditions ahead to avoid sudden braking.

17

1

Share

Can Motorcycle Antifreeze and Car Antifreeze Be Used Interchangeably?

Motorcycle antifreeze and car antifreeze must be of the same brand to be used interchangeably. Different brands of antifreeze may have varying production formulas, and mixing them could lead to chemical reactions between multiple additives, rendering them ineffective. Method for Replacing Antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way water pipe. The five-way pipe gets its name from having five connection points to various parts. Antifreeze flows through the five-way pipe and is then distributed to different sections of the car to function. If there is any antifreeze leakage in this area, replace the water pipe or reseal the connection as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir and continue filling it until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Keep adding clean water until the outflow is clear. Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add the new antifreeze through the radiator hose to allow it to flow quickly into the radiator. Then, pour another bottle of antifreeze into the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop. Top up the antifreeze to the "MAXT" mark on the reservoir.

8

0

Share

How Many Years Until a Diesel SUV is Scrapped?

The scrapping age limit for diesel SUVs is 15 years. Non-commercial passenger vehicles with 9 seats or fewer (including sedans and off-road vehicles) have a usage period of 15 years. If the vehicle meets the scrapping standards but the owner wishes to continue using it, it must undergo biannual inspections starting from the 16th year. For vehicles over 20 years old, quarterly inspections are required from the 21st year onward. Currently, China's post-scrappage vehicle processing methods are relatively singular, with most vehicles being sold as scrap metal. According to national regulations, key components such as the engine, transmission, front and rear axles, and steering gear must not be resold after dismantling. These parts must be irreversibly destroyed, with the entire process recorded on video. Smaller components like mirrors and doors may be sold to remanufacturing companies if they are in good condition. However, most parts have limited reuse value, so legitimate scrapyards primarily process scrapped vehicles as scrap metal. To scrap a vehicle, the owner must present the vehicle's license, registration certificate, and their ID. For vehicles owned by companies or organizations, a business license or organization code certificate is required. Diesel engines offer advantages such as high torque and good fuel economy. While their working cycle (intake, compression, power, exhaust) is similar to gasoline engines, diesel's higher viscosity and lower auto-ignition temperature result in different fuel-air mixture formation and ignition methods. Specifically, diesel engines use compression ignition rather than spark ignition.

2

4

Share

Can Replacing the Charcoal Canister Solenoid Valve Really Save Fuel?

Replacing the charcoal canister solenoid valve can save fuel. Relevant details are as follows: 1. The charcoal canister solenoid valve is a device installed in cars or motorcycles to reduce air pollution caused by fuel vapor emissions while improving fuel efficiency. If the charcoal canister solenoid valve malfunctions, it will naturally increase fuel consumption. 2. The working principle of the charcoal canister solenoid valve is: After the engine is turned off, fuel vapor mixes with fresh air inside the canister and is stored in the activated charcoal canister. When the engine starts, the solenoid valve between the activated charcoal canister and the intake manifold opens, allowing the fuel vapor in the activated charcoal canister to be drawn into the cylinders by the vacuum in the intake manifold, where it participates in combustion. This not only reduces emissions but also lowers fuel consumption.

10

3

Share

What are the three components of the new energy vehicle three-in-one system?

New energy vehicle three-in-one system refers to the motor, reducer, and motor controller. Reliability technical requirements for new energy vehicle three-in-one system: Maximum RMS acceleration for random vibration is 21.4m/s2, 10 hours in each direction. Sine random vibration - sine (100Hz-440Hz) maximum acceleration 50m/s2, test frequency range 10Hz to 100Hz, 33 hours in each direction. Sine random vibration - random, maximum RMS acceleration 68.7m/s2, 33 hours in each direction. All vibration tests must be completed under high/low temperature cycling conditions. Currently, many suppliers or OEMs worldwide are developing three-in-one products (mainly for passenger vehicles), such as Bosch, GKN, ZF, Denso, Schaeffler, Continental, Magna, BorgWarner, Nidec, etc. from abroad, and BYD, Shanghai Huayu, Changan, Great Wall, Geely's VREMT, as well as suppliers like Jing-Jin Electric, Inovance, Edrive, Dajun, etc. from China. "Drive three-in-one": includes motor, motor controller, and reducer. It is equivalent to the engine and transmission in traditional gasoline vehicles. "High-voltage three-in-one": includes DC-DC converter, OBC onboard charger, and PDU high-voltage distribution box. It serves as the "substation" and "dispatch station" responsible for distributing the vehicle's high-voltage electricity.

9

0

Share

What is the process for licensing a transferred vehicle?

What is the fuel tank repair project?

Is It Normal to Drive 500 Kilometers on a Full Tank of Gas?

Can Motorcycle Antifreeze and Car Antifreeze Be Used Interchangeably?

How Many Years Until a Diesel SUV is Scrapped?

Can Replacing the Charcoal Canister Solenoid Valve Really Save Fuel?

What are the three components of the new energy vehicle three-in-one system?

Does opening windows while sleeping in the car with AC on have any impact?

What Causes Low-Speed Jerking?

What does ACM mean in new energy vehicles?

Will ETC be stolen if not used?