What is the process for car repainting and color change?

1 Answers
VanMargaret
07/29/25 3:31pm
The process for car repainting and color change is as follows: 1. Bring all relevant documents to the vehicle management office, fill out the motor vehicle modification registration application form, and submit the modification request; 2. The vehicle will be inspected to verify the color, chassis number, etc., and photos will be taken for record; 3. After approval from the vehicle management office, you can take the car for repainting. Once the repainting is completed, bring the car back to the vehicle management office for photos of the new color to be archived; 4. The vehicle management office will record the modification details in the motor vehicle registration certificate and issue a new motor vehicle license. After changing the car's color, you must proactively register the modification with the vehicle management office within ten days. Only after registration can the repainted vehicle be legally driven on the road. If the color change covers less than 30% of the vehicle's surface area, registration is not required. Additionally, the new color must not resemble or be identical to that of special-purpose vehicles.
Was this review help?
17
0
Share
More Forum Discussions

How many days is the highway free during the 2020 Mid-Autumn Festival?

Normally, highways are tolled during the Mid-Autumn Festival and do not offer free passage. However, the 2020 Mid-Autumn Festival was special because the 15th day of the eighth lunar month coincided with October 1st, overlapping with the National Day holiday. In 2020, the Mid-Autumn Festival and National Day shared an 8-day holiday period, during which highways were toll-free. The free period for highways during the 2020 National Day and Mid-Autumn Festival was from 00:00 on October 1st to 24:00 on October 8th, totaling 8 days. The vehicles eligible for free highway passage included passenger vehicles with 7 seats or fewer (including 7 seats) traveling on toll roads, as well as motorcycles permitted on ordinary toll roads. The scope of toll-free highways for airport expressways in various regions must comply with the Highway Law of the People's Republic of China and the Regulations on the Administration of Toll Roads, covering toll roads (including toll bridges and tunnels) approved according to the law. Whether airport expressways in different regions implement free passage is determined by the provincial (autonomous region or municipality) governments.
9
0
Share

Can Guangdong Z License Plates Be Used Nationwide?

Guangdong Z license plates cannot be used nationwide. Vehicles with Guangdong Z license plates are only allowed to operate within cities in Guangdong Province. Driving beyond the boundaries of Guangdong Province is considered a traffic violation of "operating a motor vehicle without license plates." The issuance of Guangdong Z license plates itself is intended to promote exchanges in the Guangdong-Hong Kong-Macao Greater Bay Area. However, due to differences in the transportation systems of the two regions, complete unification in terms of passage cannot be achieved. Conditions for Hong Kong vehicles to apply for Guangdong Z license plates: 1. Overseas investors who have invested in Guangdong Province and have accumulated tax payments of more than 100,000 RMB within 3 years (including the application year) can apply for one mainland business vehicle license plate during the validity period of the contract; 2. Those with accumulated tax payments of more than 500,000 RMB can apply for a second license plate; 3. Those with accumulated tax payments of more than 1 million RMB can apply for a third license plate.
16
1
Share

What happens if you fill a car designed for 92 octane with 95 octane gasoline?

If a car designed for 92 octane gasoline is filled with 95 octane gasoline for a long time, it may cause engine knocking, reduced power, increased water temperature, and metallic knocking sounds during operation. Gasoline is a mixture, and the octane rating refers to the anti-knock index of the gasoline. Strictly speaking, 92 octane and 95 octane gasoline should not be mixed. However, their chemical compositions are relatively similar, and both have strong anti-knock properties. Mixing lower octane gasoline with higher octane gasoline can lead to knocking, insufficient power, and may affect the lifespan of the spark plugs, as well as increase tailpipe emissions. Mixing different grades and types of gasoline may not cause obvious problems in the short term, but carbon buildup and fuel system blockages are long-term consequences of such mixing.
11
3
Share

What is the difference between direct injection and multi-point injection?

Differences between direct injection and multi-point injection: 1. Different fuel injection methods: Direct injection delivers fuel directly into the cylinder, where it mixes with air from the intake manifold before combustion; multi-point injection sprays fuel at the intake manifold, where it mixes with air before entering the cylinder for combustion. 2. Different technologies: Direct injection technology is less mature and more complex in structure; multi-point injection technology is mature and simpler in structure. Direct injection involves injecting fuel directly into the cylinder to mix with air, with advantages including lower fuel consumption, higher power output per liter, and a compression ratio as high as 12, improving power and torque by 10% compared to conventional engines of the same displacement. Multi-point injection refers to the process in gasoline engines where fuel is injected into the intake manifold, controlled by a specific timing sequence from the control program, and executed by electronic fuel injectors.
2
4
Share

How deep should the grooves on brake discs be before replacement?

Brake discs should be replaced when the groove depth on both sides exceeds 1 millimeter. If the grooves on the brake discs are not deep, the brake pads can be removed and smoothed with coarse sandpaper. After reinstalling the sanded brake pads, the grooves on the brake discs can be eliminated during use. Alternatively, softer brake pads can be chosen; although they wear out faster, they are less likely to cause grooves on the brake discs. Simply put, a brake disc is a rotating disc that turns as the vehicle moves. The brake caliper clamps the brake disc to generate braking force, slowing down or stopping the vehicle when the brakes are applied. Brake discs offer effective braking performance and are easier to maintain compared to drum brakes.
20
4
Share

What does the M gear in a car mean?

The M gear in a car refers to the manual shifting mode. There will be a plus and minus sign next to the M gear transmission. Shifting can be done by pushing the gear lever forward or backward, or by using the steering wheel paddle shifters. There is no need to release the throttle when shifting gears; simply press the plus or minus to shift. Functions of the M gear in automatic transmission cars: 1. Manual adjustment of gear shifting. You can press this button to shift up or down, and freely adjust by moving the gear lever left, right, up, or down; 2. Gear shifting operations are only executed within safe parameters. Shifting up or down will only be performed within the set safe parameters; 3. The CVT transmission provides a more direct power feel, mainly targeting dual-clutch transmissions and traditional AT transmissions.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.