What is the process for buying a car?

1 Answers
DiAnderson
07/30/25 12:23am
The car buying process is as follows: 1. After selecting the desired vehicle, first pay a deposit or the full amount, and wait for the 4S store to customize the vehicle according to your needs. 2. Then go to the local Administration for Industry and Commerce Motor Vehicle Management Office to have the purchase invoice stamped with the industrial and commercial inspection seal. Additionally, necessary insurances such as compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, and onboard liability insurance should be processed. 3. While handling the insurance, you also need to pay the vehicle purchase tax, which is 10% of the vehicle price for domestic cars and 10% of the dutiable value for imported cars. When picking up the car, be sure to verify all items and fees, inspect the vehicle's appearance and functions, and check if all documents are complete. Finally, register the vehicle and pay the road maintenance fee.
Was this review help?
6
0
Share
More Forum Discussions

What to Do When the Sunroof Switch Fails?

Solutions for a malfunctioning sunroof switch: After removing the cover clips, take out the faulty switch controller, replace it with a new one, and then secure the cover back in place. If there is insufficient lubrication, the resistance becomes too great, causing the sunroof to activate the automatic anti-pinch feature, which results in the sunroof being able to open but not close. The sunroof mainly consists of a glass panel, sealing rubber strips, and a driving mechanism. The opening styles of sunroofs are generally categorized into external sliding panel, internal sliding panel, and tilting types. The external sliding panel type features a glass panel that slides above the roof panel; the internal sliding panel type has a glass panel that slides between the roof panel and the interior headliner; the tilting type allows the front or rear end of the glass panel to tilt upward for opening. Currently, the latter two styles are more commonly used.
10
3
Share

How to deal with the ABS light on in a car?

When the ABS light in a car is on, the recommended approach is to have the vehicle inspected and repaired at a service center promptly to ensure driving safety. Before taking the car to a 4S shop for repairs, it is advisable to avoid high-speed driving and sudden braking. Reasons for the ABS light being on include: 1. When the vehicle speed exceeds 10 kilometers per hour, no speed signal is transmitted to the ABS control unit; 2. When the vehicle speed is greater than 40 kilometers per hour, the speed signal exceeds the tolerance range; 3. There is an open circuit in the sensor or a short circuit to the positive or ground. ABS, the anti-lock braking system, is a technology developed by Robert Bosch GmbH for use in motorcycles and cars to prevent loss of control and increase braking distance, thereby improving vehicle safety.
16
2
Share

What is the method for making a 90-degree turn?

The method for making a 90-degree turn is: 1. When approaching a 90-degree turn, try to keep the front of the car as close to the outer side as possible; 2. Align the right one-third of the car's front with the edge line on the right side—this distance is just right; 3. For a right turn, when the car body is 30 centimeters away from the road edge, it's the perfect moment; 4. Move forward while staying close to the outer side. When reaching the turning point, do not rush to turn to avoid getting stuck in very narrow road conditions. Always try to move forward as much as possible while driving straight. The ideal moment is when, from inside the car, the front covers the edge line ahead; 5. At this point, turn the steering wheel fully. Once the entire car body has completed the turn, straighten the wheels completely.
13
1
Share

How to Start the Car in Driving Test Subject 3?

The method to start the car in Driving Test Subject 3 is: 1. After hearing the voice prompt to start, depress the clutch; 2. Shift the gear into first gear; 3. Turn on the left turn signal, which will be displayed on the dashboard; 4. Simultaneously observe the left rearview mirror, confirm safety, and honk the horn; 5. Release the parking brake, start smoothly, and turn off the turn signal. Before starting, observe first. When the conditions are suitable for starting, release the clutch. At this time, you won't be nervous due to incoming and outgoing vehicles affecting your operation, and you can start slowly. The method of using gears in a manual transmission is: 1. Start in 1st gear; 2. Use 2nd gear between 20 to 40 km/h; 3. Use 3rd gear between 40 to 60 km/h; 4. Use 4th gear between 60 to 75 km/h; 5. Use 5th gear above 75 km/h; 6. Reverse gear is used for backing up.
20
1
Share

Is It Good to Step on the Gas Pedal Hard When Starting a Car?

Stepping on the gas pedal hard when starting a car can cause significant damage to the vehicle. Frequently accelerating aggressively from a standstill does more harm than good, especially to the car's engine and transmission. Here are the relevant details: 1. During rapid acceleration, the engine's RPM suddenly increases, causing the engine pistons to operate at high speeds. Theoretically, this also generates substantial impact on components such as the engine crankshaft and cylinder walls. 2. The transmission interacts with the engine, and its interior consists of various gears and components. During rapid acceleration, the sudden generation of high torque places greater pressure on parts like the steel belt gears and clutch. Friction between transmission components can easily produce fine metal shavings, leading to impurities in the engine oil. This is why new cars require an oil change during their first maintenance.
16
4
Share

How to Turn Off a Mercedes-Benz Car?

There are four steps to turn off a Mercedes-Benz car: 1. Shift the gear to N (Neutral) and engage the electronic parking brake. 2. Continue to press the foot brake and shift the gear from N to P (Park). 3. Release the foot brake and press the one-touch start button. 4. The power turns off, completing the shutdown process. Before turning off a Mercedes-Benz car, pay attention to the following four points: 1. Ensure the vehicle is safely and steadily stopped before turning it off, and make sure the car won't slide before shifting the gear lever. 2. Straighten the steering wheel before turning off the car. A misaligned steering wheel keeps the car's steering system under stress, which can cause deviations in wheel alignment. 3. Choose an appropriate parking location before turning off the car. 4. Turn off the air conditioning before shutting down the car. If the air conditioning is left on when turning off the car, the car's power will surge when starting, affecting the startup process.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.