What is the process for a six-year vehicle inspection on the testing line?

2 Answers
VonHailey
09/08/25 4:29am
First, queue up and pay the inspection fee at the payment window, then wait to go on the line. The staff will conduct an initial inspection, followed by filling out the exhaust emission test form. At the window, collect and fill out the 'Motor Vehicle Periodic Inspection Registration Form,' which can be obtained using the vehicle's registration certificate. Address any traffic violations promptly. Pay the deposit at the deposit window, keep the deposit receipt, and collect and fill out the appearance inspection form. Take the appearance inspection form to the appearance inspection station and first verify the relevant documents. If the appearance inspection passes, queue up to wait for the line inspection. It takes approximately 5-10 minutes, and once the vehicle is driven off the line, you can collect the pass certificate. After passing the final review, prepare a copy of your ID card, sign and get it stamped at the main inspection office in the hall. Then, collect the inspection label and pay the relevant fees at the designated windows.
Was this review help?
17
0
Share
ReeseLee
09/20/25 3:13am
I drove to the inspection station for the six-year mandatory vehicle inspection, feeling a bit nervous for the first time. First, I brought all the required documents: the vehicle license, ID card, and a copy of the compulsory traffic insurance. At the counter, I registered and paid a fee of over 200 yuan. Then, the staff directed me to drive the car to the external inspection area, where they checked the body for scratches or modifications, tested if the lights were working, measured the tire tread depth, and confirmed that the car was equipped with a warning triangle and fire extinguisher. Next, the car entered the workshop for an emissions test—the mechanic inserted a probe into the exhaust pipe and revved the engine to measure emission levels. After that, the inspection line was crucial: the front wheels stood on rollers to test braking force, instruments adjusted the headlight beam angles, and the chassis was lifted to check for suspension oil leaks. The whole process took nearly two hours. Finally, I took the inspection report to the hall to get it stamped and received the annual inspection sticker, finally breathing a sigh of relief. My advice is to book an appointment in advance to avoid peak hours, and to fix any issues with lights or brakes beforehand to avoid rework and hassle.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What is the difference between 91h and 91v tires?

The difference between 91h and 91v tires lies in their respective representations: 91h indicates the tire load index, where 91 corresponds to a maximum load capacity of 615 kilograms per tire, and h represents the speed rating, with h indicating a maximum speed of 210 kilometers per hour under specified load conditions; 91v denotes the load coefficient and tire speed limit, where 91 signifies a load capacity of 615 kilograms per tire, and v indicates an allowable driving speed of 240 kilometers per hour. Automotive tires are one of the crucial components of a vehicle, directly contacting the road surface and working in conjunction with the vehicle's suspension to mitigate impacts during driving, ensuring excellent ride comfort and smooth operation; they also maintain good adhesion between the wheels and the road surface, enhance the vehicle's traction, braking, and off-road capabilities, and bear the weight of the vehicle.
11
4
Share

What is the 0-100km/h acceleration time of the Lingdong 1.4t?

The 0-100km/h acceleration time of the Lingdong 1.4t is 8.5 seconds. The Lingdong is a compact car from Hyundai. In terms of body dimensions, the Lingdong measures 4610mm in length, 1800mm in width, and 1450mm in height, and it is a 4-door, 5-seater sedan. The Lingdong is equipped with an AEB (Automatic Emergency Braking) system, which can effectively predict whether a collision will occur by assessing the relative speed and size of obstacles in front of the vehicle, and automatically apply the brakes in emergency situations. To enhance safety protection, the Lingdong uses up to 53% hot-formed steel and ultra-high-tensile steel plates, significantly increasing the average strength of the body.
10
2
Share

What is the solution for unstable idle speed in older Ford Focus models?

Older Ford Focus models experiencing unstable idle speed can be addressed with the following solutions: 1. Throttle body malfunction: The throttle controls the engine's air intake. When the throttle position sensor fails, the throttle opening becomes inaccurate, leading to uncontrolled air intake and fluctuating mixture concentration, which causes unstable idle speed and higher fuel consumption. Replacing the throttle position sensor will resolve the issue. 2. Excessive carbon deposits: Carbon buildup results from poor fuel quality or impurities in the intake air. These deposits can accumulate in various components such as fuel injectors, throttle body, intake ducts, and spark plugs. Carbon deposits absorb fuel from the air-fuel mixture, making it too lean, and when the deposits release the absorbed fuel into the combustion chamber due to engine vacuum, the mixture becomes too rich, affecting idle stability. Cleaning the carbon deposits will solve the problem. To prevent recurrence, ensure good fuel quality and regularly clean the air filter.
16
3
Share

What is the fuel consumption of the old Leopaard model?

The fuel consumption of the old Leopaard model is 11.8L/100km. Here is an extended introduction: 1. Power: The 2014 Leopaard Black Diamond offers two engine options - a 2.4L naturally aspirated engine and a 2.5T turbocharged engine, with maximum horsepower of 129hp and 102hp respectively, delivering average performance. 2. Engine: This engine features mature technology, low maintenance costs, good fuel economy, and stable torque output, commonly found in vehicles of this price range. The 5-speed manual transmission pairs well with the engine, providing clear gear shifting and smooth power delivery. The long clutch engagement travel makes it difficult to stall even for beginners. Additionally, the engine's high tolerance to RPM avoids unnecessary frequent gear changes, offering convenience for urban driving conditions.
19
2
Share

How to Correctly Operate Gear Shifting in Subject Three?

Subject Three gear shifting operation correct method: 1. When shifting gears, first decelerate, release the accelerator with the right foot, then press the clutch with the left foot to perform upshifting; 2. After completing the upshift, slowly release the clutch, and then press the accelerator after fully releasing it; 3. When downshifting, first release the accelerator pedal, lightly press the brake, then press the clutch with the left foot to perform downshifting; 4. After completing the downshift, slowly release the clutch, and then press the accelerator after fully releasing it. The basic principles of gear shifting are: upshift first increase speed, downshift first decrease speed, gear and speed must match. During the test, the speed of 1st gear must not exceed 20km/h; 2nd gear speed must not exceed 30km/h; 3rd gear speed must not be lower than 20km/h and must not exceed 40km/h; 4th gear speed must not be lower than 30km/h; 5th gear speed must not be lower than 40km/h.
4
0
Share

How to Handle Rear Tire Skidding to the Right on Muddy Roads?

When encountering rear tire skidding to the right on muddy roads, you should steer to the right. When the rear tires skid, turning the steering wheel in the same direction helps maintain the vehicle's heading and prevents the car from spinning, avoiding danger. If the front wheels skid, you should steer in the opposite direction. For rear wheels skidding to the right, steering in the same direction causes the right wheels to rotate faster and the left wheels slower, increasing traction and restoring the driving direction. To recover from a skid, ensure the vehicle's braking system is functioning properly, so that the front and rear wheels can generate uniform braking force simultaneously during braking, preventing the rear wheels from locking up before the front wheels or causing the car to deviate from its normal path due to uneven force distribution among the four wheels.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.