···
Log in / Register

What is the process after a driver's license is deducted 12 points?

4 Answers
AliceFitz
09/01/25 6:48am
After a driver's license is deducted 12 points, the driver needs to attend training and retake the test. The following are the specific steps to retrieve the driver's license after it has been deducted 12 points: 1. Enrollment for study: The driver needs to bring the "Admission Notice" to the school to enroll and participate in the study. If the driver finds out through inquiry that the points have been fully deducted, they can also bring the driver's license to enroll, which is equally valid. 2. Study courses: The courses include road violation scoring and penalties, driver psychological quality and traffic safety, road traffic safety laws and regulations, etc. 3. Passing the test and returning the driver's license: After the motor vehicle driver participates in the study, the vehicle management department should conduct a road traffic safety laws, regulations, and related knowledge test within 20 days. If the test is passed, the points will be cleared, and the motor vehicle driver's license will be returned.
Was this review help?
9
2
Share
MacEmily
09/14/25 2:37am
I've been driving for over a decade and almost maxed out my points two years ago, so I specifically inquired about the process. If your driver's license points are completely deducted, you must stop driving. The traffic police will issue a notice requiring you to bring your ID card and driver's license to report to the local traffic police station. Then, you'll need to attend a 7-day traffic safety education program, which involves watching traffic rule videos and accident case studies every day—quite torturous. After completing the course, you must pass the theoretical test (Subject 1) to get your license back. If you fail, you'll have to retake the course and the exam, wasting more time. My friend maxed out his points last year due to speeding, took leave to study, and passed only on his second attempt—now he drives much more cautiously. Drive carefully, check your points regularly, and don't wait until something happens to regret it. Safety is no small matter, and it keeps your family at ease. Always mind speed limits and traffic rules to avoid unnecessary trouble.
Was this review help?
13
3
Share
Expand All
JocelynRose
10/28/25 3:21am
I'm a new driver who recently maxed out 12 points for running a red light last month, and had to personally handle the process. First, I reported to the traffic police station, filled out forms, and was assigned 7 days of mandatory classes covering traffic laws and ethics – quite dull but necessary. Then came the Theory Test (Subject 1), which was challenging and required serious preparation. Passing resets your license points to zero; failing means retaking the course. During this period, driving is prohibited – I relied entirely on buses for commuting, a hard lesson learned. I advise new drivers to check points regularly via traffic management apps and stay vigilant once deductions accumulate, unlike my careless approach. Preventing drunk driving and speeding is crucial – driving is a responsibility, not a game. Stay cautious to avoid disrupting daily life.
Was this review help?
2
5
Share
Expand All
DeKeira
12/11/25 3:36am
Dealing with a full 12-point deduction requires clear steps. After your license is revoked, promptly report to the traffic police department and participate in a week-long safety education program covering laws and practical operations. Upon completion, take the Subject 1 exam—passing it allows you to drive again with your points reset to zero. Failing means a retake, doubling the hassle. The process emphasizes responsibility and awareness to prevent habitual violations. Drivers are reminded to attend regular training to avoid the inconvenience of point depletion. Safe driving benefits everyone; obeying rules is fundamental—don’t gamble with luck to avoid trouble. Regular vehicle checks also reduce risks.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

How to Install a Child Safety Seat Without ISOFIX Interface?

The following are specific methods for installing a child safety seat without an ISOFIX interface: 1. Use the seat belt to secure the seat. There are two installation methods: forward-facing and rear-facing, with rear-facing being more suitable for infants. 2. Since the seat belt can easily get stuck when stretched too long, pull it out completely at the beginning to facilitate subsequent steps and avoid insufficient length or getting stuck, which would require restarting the process. 3. Thread the seat belt through the seat, secure it with the seat's red fixing clip to prevent the belt from sliding and failing to hold the seat in place, then insert it into the buckle.
11
2
Share

How to Replace Car Air Conditioning Refrigerant?

Here are the steps to replace the refrigerant: 1. Discharge the refrigerant from the air conditioning system. 2. Remove the radiator; 3. Remove the condenser inlet and outlet pipes; 4. Unscrew the fixing bolts and remove the condenser; 5. Before installation, thoroughly clean the condenser to ensure sufficient airflow through the condenser coils for adequate heat dissipation; 6. During installation, pay attention to the correct position of the lower part of the condenser. The gap between the upper end and the engine hood should not be less than 5mm. Here is additional information on the symptoms of excessive refrigerant in car air conditioning: 1. The suction and discharge pressures of the air conditioning system are too high, and the equipment operates at elevated temperatures; 2. The current value of the compressor power supply is significantly higher, and prolonged operation may burn out electrical components; 3. The condenser is filled with refrigerant, reducing the heat exchange area, leading to high-pressure protection when the car air conditioning is turned on.
12
0
Share

How to Turn on the Air Conditioning Cooling in Audi Q5?

Here are the methods to turn on the air conditioning cooling in Audi Q5: 1. OFF air conditioning unit button, press the rotary regulator 2 to turn on or off the air conditioning unit. If another button or a rotary regulator is pressed, the air conditioning unit will also be turned on. When the air conditioning unit is turned off, the air supply from outside the vehicle is cut off. 2. A/C cooling operation mode, press the A/C button to turn on or off the cooling mode. When the cooling operation mode is turned off, the air is not cooled or dehumidified. In this case, water mist may form on the windshield. When the outside temperature is below zero, the cooling mode is automatically turned off. 3. Cooling operation, use the button to turn on/off the maximum cooling. When the cooling operation mode is turned off, the air is not cooled or dehumidified.
19
5
Share

What to Do When Your Car Battery Dies Because the Headlights Were Left On

Solutions for when your car battery dies due to leaving the headlights on are as follows: 1. Jump-start the car: If the battery dies in the city, the owner can ask a friend or a passing vehicle to jump-start the car using jumper cables. Connect the positive and negative terminals of the dead battery with the jumper cables, then attach the other ends to the rescue vehicle's battery. Start the dead car and drive to a repair shop as soon as possible for battery repair or replacement. 2. Call a tow truck: If this happens in a remote area, call a tow truck to take the car to a repair shop for charging. 3. Push-start the car (only for manual transmission cars): If the battery dies in the countryside with no passing vehicles to help, you can push-start the car. The specific method is to find a passerby to help push the car while the ignition is on. As the car starts moving, the driver should press the clutch and shift into second gear. When the speed increases slightly, release the clutch and gently press the accelerator to start the car.
5
3
Share

What Causes Steering Wheel Vibration When Lightly Pressing the Brakes?

Steering wheel vibration when lightly pressing the brakes is caused by: uneven wear between the brake discs and brake pads, or jagged wear on the brake discs, which generates resonance transmitted to the steering wheel through the steering gear. The only solution to this issue is to replace the brake discs and brake pads with new ones. The braking system is crucial and requires regular inspection and replacement of brake fluid. Over time, friction between the brake pads and discs produces metal shavings that need periodic cleaning. During normal braking, the brake discs generate significant heat due to friction as the vehicle slows down, leading to high temperatures. Compared to brake pads, brake discs wear more slowly, but after prolonged use, they will show signs of wear. If the brake disc surface becomes uneven or the thickness falls below standard, it can severely impact braking performance over time.
9
3
Share

Do hybrid electric vehicles need to be charged?

Hybrid electric vehicles do not need to be charged. They are equipped with two power sources: the thermal power source generated by gasoline or diesel and the electric power source generated by the battery. In addition to the power system, the vehicle itself comes with an energy recovery system. During driving, excess energy from the engine and braking energy can be converted into electricity and stored in the battery for charging purposes. Hybrid electric vehicles use an electric motor as an auxiliary power source to assist the engine, and the electric motor can provide strong and smooth power during normal driving.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.