···
Log in / Register

What is the procedure for reporting a stolen vehicle?

4 Answers
LaReid
08/26/25 4:56am
Report the theft to the public security department within 24 hours and obtain a written statement confirming the vehicle loss. Then proceed to the vehicle management office to cancel the license plate. File a claim with the insurance company within 48 hours. Claims may be denied if reported after 48 hours, except in cases of natural disasters.
Was this review help?
16
5
Share
LucilleLee
09/08/25 6:40am
If my car is stolen, I need to report it to the police immediately without any delay. First, I should confirm that it's indeed stolen and not just a case of forgetting where I parked. Then, I'll call 110 right away. The operator will ask for vehicle details, so I must provide clear information like the car's brand, model, color, and license plate number. Of course, I should also have the car's VIN, my ID card, and a copy of the insurance policy ready for submission. After reporting, the police will file a case and investigate, and I'll cooperate by giving a statement. At the same time, I'll notify the insurance company promptly to handle the claim. Preventive measures are also crucial, such as installing a GPS anti-theft tracker, which makes it easier to locate the car if it's stolen. Throughout the process, staying calm is key to minimizing further losses.
Was this review help?
9
4
Share
Expand All
OAlice
10/22/25 6:45am
The moment I realized my car was missing, I immediately picked up my phone and dialed 110 to report it to the police. This step is crucial. I directly provided the officers with detailed information about the vehicle, such as its color, make, and license plate number. I also reminded myself not to panic and retrieved the VIN number and my ID from the car for police verification. The next step was to contact my insurance company and submit the police report to initiate the claim process. Car thieves often act quickly, so I always recommend installing anti-theft locks or tracking apps beforehand to increase the chances of recovery if the car is stolen. Of course, after reporting, it's important to actively cooperate with the police investigation and not overlook any evidence like surveillance footage.
Was this review help?
7
3
Share
Expand All
EmilianoAnn
12/05/25 7:08am
The first step after your car is stolen is to immediately call 110 to report the theft, providing detailed information such as the car model, color, and license plate number. At the same time, prepare the VIN and owner's documents to allow the police to quickly record and file the case. Then notify the insurance company to handle the claim. The entire process should focus on quick response to avoid delays that may make it difficult to recover the car. Additionally, it is recommended to install an anti-theft device to facilitate tracking.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What causes the Mazda6 to feel sluggish and lack acceleration power?

The reasons for a car feeling sluggish and lacking acceleration power include carbon buildup issues, fuel system problems, intake system issues, engine overheating, etc. Specific problems are as follows: 1. Carbon buildup issues: These include cylinder carbon deposits, throttle body carbon deposits, spark plug carbon deposits, and intake carbon deposits. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the car's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power and sluggish acceleration with a muffled sound. 2. Fuel system: Using incompatible fuel octane ratings can cause a decrease in the car's output power and reduced performance; or if the fuel tank vent is blocked, the fuel tank switch, fuel filter, or the fuel line between the tank and the carburetor are partially clogged, it may not supply the required amount of fuel, resulting in a lean air-fuel mixture and sluggish engine acceleration. 3. Intake system: Air is one of the engine's power sources. If the air filter is not cleaned in time after long-term use and becomes clogged, insufficient air supply will cause an overly rich air-fuel mixture, reducing engine power. For vehicles with turbochargers, if the turbocharging system fails, the engine will still feel sluggish and fail to deliver power even when the throttle is applied. 4. Engine overheating: Insufficient engine oil, low engine coolant levels, or malfunctioning engine cooling systems can increase the engine's load, leading to poor heat dissipation. Engine overheating can result in poor lubrication, increased mechanical wear, and reduced engine power, causing sluggish acceleration.
3
5
Share

What is the standard following distance on highways?

When driving on highways, if the vehicle speed exceeds 100 kilometers per hour, the distance from the vehicle in front in the same lane should be maintained at more than 100 meters; when the speed is below 100 kilometers per hour, the distance from the vehicle in front can be appropriately reduced, but the minimum distance should not be less than 50 meters. When driving on highways under low visibility weather conditions such as fog, rain, snow, dust, or hail, the following regulations should be observed: When visibility is less than 200 meters, turn on the fog lights, low beam lights, clearance lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and the distance from the vehicle in front in the same lane should be maintained at more than 100 meters. When visibility is less than 100 meters, turn on the fog lights, low beam lights, clearance lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 kilometers per hour, and the distance from the vehicle in front in the same lane should be maintained at more than 50 meters. When visibility is less than 50 meters, turn on the fog lights, low beam lights, clearance lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 kilometers per hour, and the vehicle should exit the highway at the nearest exit as soon as possible.
1
2
Share

Must the battery of Lynk & Co 01 be replaced at a 4S store?

There are no strict regulations on this matter. You can choose either a repair shop or a 4S store for battery replacement. Here are some battery maintenance tips: 1. Dust cleaning: Use a damp cloth to wipe the exterior of the battery, removing dust, grease, white powder, and other contaminants that may cause leakage from the panel and terminals (positive and negative poles). Regular cleaning prevents the accumulation of white acidic corrosion powder on the terminals, thereby extending the battery's lifespan. 2. Check the water level: Open the battery's water-filling cap to see if the water level is within the normal range. There are usually upper and lower limit markers on the side of the battery for reference. If the water level is below the lower marker, distilled water must be added. If distilled water is not immediately available, filtered tap water can be used as an emergency measure. Do not overfill; the standard is to add water up to the midpoint between the upper and lower markers. 3. Check the charging status: Visually inspect the battery after starting the engine by opening the water-filling cap and observing whether bubbles are emerging from each small compartment. Normally, there should be continuous bubbles rising to the surface, increasing with engine acceleration. If no bubbles are observed, there may be an issue with the charging system. Important note: Hydrogen gas is produced during this inspection, so smoking is strictly prohibited to avoid the risk of explosion or fire.
18
3
Share

How to Change the Position of ETC?

If you want to change the position of your ETC, you can go to the bank for reinstallation and activation. Possible installation positions for ETC: For small vehicles such as cars and minivans, the ETC card and OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle part. ETC installation position requirements: the height should be no less than 1.2 meters and no higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. The red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive protective film on the back of the OBU and stick it to the installation position. Press firmly with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.
20
4
Share

What are the materials used for car seats?

Currently, the materials used for car seats on the market are as follows: 1. Leather seats: Leather seats mainly refer to the leather upholstery used in higher-end models of regular vehicles. Leather seats do not require special maintenance. If the surface is stained, wiping with a damp cloth can remove the dirt. For stubborn oil stains, a specialized leather cleaner must be used to prevent damage to the leather. Additionally, care must be taken to prevent sharp metal objects from scratching the leather surface during use. 2. Fabric seats, as the name suggests, are made from textile materials. Fabric seats are easy to maintain and offer excellent comfort. They are considered high-end by many, are durable and not easily damaged, and provide top-notch breathability in both winter and summer. 3. Designo seats: Designo seats are a star product among leather seats, crafted by the renowned interior design company Designo. They represent the finest quality calf back leather from farms in northern Germany, undergoing an exquisite leather-making process to deliver the most luxurious interior design. Designo seats are typically used in high-end M-Benz products, such as the S-Class and M-Class, which often feature Designo interior special editions. 4. Nappa seats: Nappa seats are classified as high-end leather seats. Nappa refers to a leather-making style, often characterized by soft grain patterns. Nappa seats are commonly used in high-end models of brands like BMW, VW, and Audi. They are usually made from sheepskin, top-grain cowhide, or split cowhide, featuring a smooth surface and soft texture.
2
5
Share

What is the reason for the speedometer of BYD F0 not working?

BYD F0 speedometer not working is caused by a damaged vehicle speed sensor, which can be fixed by replacing the speed sensor. The specific steps for replacement are: 1. Locate the sensor position; 2. Use tools to remove the sensor fixing screws; 3. Loosen the sensor by shaking; 4. Unplug the sensor and install the new one. BYD F0 is a compact car launched by BYD Company. In terms of tires, it comes standard with 16.5cm wide, 60 aspect ratio, 14-inch wheels. In terms of power, the BYD F0 is equipped with a BYD self-developed DOHC three-cylinder 1.0L engine, with a maximum power of 50kw, maximum torque of 90nm, maximum horsepower of 68ps, cylinder block material made of full aluminum alloy, and adopts multi-point electronic fuel injection technology.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.