What is the procedure for obtaining the new vehicle inspection sticker?

1 Answers
SanLouis
07/29/25 11:46am
The procedure for obtaining the new vehicle inspection sticker: After completing the vehicle inspection at the DMV, the DMV will issue the inspection sticker. Below is relevant information about the inspection sticker: 1. New regulation: New vehicles no longer need to display the physical inspection sticker as the electronic version of the motor vehicle inspection certificate has been implemented nationwide. 2. New application method: After completing new vehicle registration and inspection procedures, owners can directly apply through the "Traffic Management 12123" mobile app. The electronic inspection certificate holds the same validity as the paper label. Note: If stopped by traffic police for inspection, you can present the electronic version of the annual inspection certificate on your mobile phone.
Was this review help?
16
1
Share
More Forum Discussions

What's the matter if the car navigation buttons don't respond?

In-vehicle navigation screen failure may be due to the following reasons: 1. The screen has reached the end of its lifespan. 2. There is an issue with the resistive touchscreen. 3. There is a film applied on the screen, and the adhesive from the film has affected the screen surface. 4. The screen itself has a problem. Relevant information about car navigation is as follows: 1. Introduction: Equipped with the GPS global satellite positioning system function, it allows drivers to know their exact location anytime while driving. Features like automatic voice navigation and optimal path search make your journey shortcut and unimpeded. Integrated office and entertainment functions enable you to drive easily and travel efficiently. 2. Principle: 24 GPS satellites orbit the Earth at an altitude of 12,000 kilometers with a 12-hour cycle, ensuring that at any given moment, any point on the ground can observe more than 4 satellites simultaneously.
15
0
Share

Which generation of Aisin is the Peugeot 408 6AT?

Third generation. Here is more information about the Peugeot 408: 1. Body dimensions: The new Peugeot 408 has a length of 4750mm, width of 1820mm, height of 1488mm, and wheelbase of 2730mm. 2. Powertrain: The Peugeot 408 adopts DPCA's mainstream engines, with two displacement options of 2.0L and 1.6L. The 2.0L model is the primary recommended displacement for the 408. 3. Safety: The Peugeot 408 features an innovative 6+X safety system, including EVA emergency braking assist system, Bosch 8.1 version ABS anti-lock braking system, EBD electronic brake force distribution, TSC traction control, and ESP electronic stability program.
14
2
Share

How to reset the maintenance reminder on the Infiniti Q50L dashboard?

The method to reset the maintenance reminder on the Infiniti Q50L dashboard is: 1. Park the vehicle and start the engine; 2. Locate the information option on the touchscreen below the center console and click to enter; 3. Select the maintenance option in the information menu, then choose maintenance reset. Taking the 2018 Infiniti QX50L Comfort Edition as an example, its body dimensions are: length 4705mm, width 1903mm, height 1681mm, with a wheelbase of 2798mm. The 2018 Infiniti QX50L Comfort Edition is equipped with a 2.0L turbocharged engine, delivering a maximum power of 180kW at 5600rpm, and a maximum torque of 350Nm between 1500 to 3500rpm.
3
0
Share

Where is the engine number stamped on the classic Focus?

Classic Focus engine number is stamped on the side of the engine, usually a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle license shows the engine number, usually located in the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not equal to the engine model. The engine model refers to the specification and size of the engine in the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is different.
6
0
Share

What is the middle button on a car key for?

The middle button on a car key is for opening the trunk. A typical car key usually has three buttons: unlock, lock, and open trunk. Here's an extended introduction to their functions: 1. Unlock button: This button should be very familiar - pressing it once will open the car doors. There's a hidden feature: pressing the unlock button once only opens the driver's door; pressing it twice unlocks all four doors; holding the unlock button for several seconds will simultaneously open all four windows. On some models, the sunroof will also open. 2. Lock button: Pressing this will lock all four doors. It also has a hidden function - remote window closing. 3. Trunk release button: Holding this button (or pressing twice for some models) will automatically open the trunk. Some vehicles even feature a hands-free trunk opening system where making a kicking motion under the rear bumper (while the key is within range) will automatically open the trunk.
8
2
Share

What are the advantages of the Peugeot chassis?

Peugeot chassis adopts the new-generation chassis system developed by the PSA Group, with standardized workmanship, delivering a driving experience of 70% comfort and 30% handling, providing overall smooth and comfortable driving. Below is an introduction to the Peugeot chassis: 1. Smoothness: Peugeot performs well under low to medium speed conditions. At 60km/h, the front/rear seat smoothness is 7.46h/4.19h; at 80km/h, it is 7.46h/3.74h. As speed increases, the front seat smoothness does not weaken. However, at 100km/h, with further speed increase, the smoothness of the front/rear seats begins to decline but still maintains good performance. 2. Comfort: Peugeot's shock absorption effect is closely related to its dual-stage damping design. Under high-frequency small-amplitude vibrations, the damping is softer, absorbing a large amount of vibration. In the case of short-frequency large-amplitude vibrations on rough roads, Peugeot implements stiffer damping, enhancing stronger vehicle support.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.