What is the procedure for handling a rear-end collision where I am fully at fault?

1 Answers
McPaul
07/30/25 1:58am
In the event of a rear-end collision on the road, the driver should immediately stop the vehicle and secure the scene. If the rear-end collision on the road does not result in personal injury, the parties involved may negotiate the compensation for damages on their own. If the collision causes personal injury, the driver should immediately provide assistance to the injured and report the incident to the traffic police on duty or the traffic management department of the public security authorities.
Was this review help?
8
2
Share
More Forum Discussions

What to Do When There's a Rustling Sound While Turning the Steering Wheel?

When there's a rustling sound while turning the steering wheel, it's important to promptly inspect the source of the sound for repairs. Here are the details: 1. Sound from the turn signal reset: If the sound occurs while turning the steering wheel with the turn signal on, it might be from the reset mechanism's spring clip, which is normal. 2. Noise from the steering column dust cover: If the noise comes from below the steering wheel, it could be due to the steering column dust cover. Lack of lubrication in the dust cover can cause friction sounds. Applying an appropriate amount of grease under the dust cover can resolve this. 3. Noise from inside the steering wheel: If the sound originates from within the steering wheel, it's likely caused by the airbag clock spring. In this case, the steering wheel airbag clock spring should be removed and greased. If the noise persists, the airbag clock spring may need to be replaced.
12
0
Share

How to Calculate Gear Width?

Gear width calculation method: The tooth width of a gear is usually expressed by the tooth width coefficient. The helical gear coefficient is 0.4, the herringbone gear coefficient ranges from 0.5 to 1.0, the straight bevel gear tooth width = gear coefficient × outer cone distance; the worm gear tooth width = 0.65 × worm pitch diameter. Below is relevant information about gears: 1. By their shape: Gears are classified into cylindrical gears, bevel gears, non-circular gears, racks, and worm gears based on their shape; by tooth line shape, they are divided into spur gears, helical gears, herringbone gears, and curved gears. 2. By the surface where the teeth are located: They are divided into external gears and internal gears; by manufacturing method, they can be classified into cast gears, cut gears, rolled gears, sintered gears, etc.
16
0
Share

What is the real reputation of the Geely Boyue Pro?

Here is an introduction to the real reputation of the Geely Boyue Pro: 1. High fuel consumption: The Geely Boyue's fuel consumption ranges between 9.5-10L/100km, which is largely due to the car's heavy weight. However, it is well-known that the H6 has similar fuel consumption, making the two models almost equal in this aspect. This alone is enough to deter many potential buyers, especially those who prioritize fuel efficiency, making it a significant drawback of the Geely Boyue. 2. Powerful engine with strong acceleration: The Boyue 1.8T model achieves a 0-100km/h acceleration time of 9.29 seconds, and the overall power delivery is smooth without any issues. Even under harsh driving conditions, the power output remains smooth. However, the high-power 1.8T engine, after being filtered by the 7DCT transmission, feels too smooth in the later stages, lacking a sense of explosive power.
8
5
Share

Where is the VIN located on the Leopaard CS10?

The VIN of the Leopaard CS10 is located on the outer side of the B-pillar on the front passenger side. Below are the specific details about the VIN: 1. First 3 characters: Represent the country of production, manufacturer, and vehicle type. 2. Characters 4-8: Indicate vehicle characteristics, such as vehicle category, body type, engine type, and gross vehicle weight rating. 3. The 9th character: Represents the check digit, used to verify the accuracy of the VIN. 4. The 10th character: Indicates the production year, identifying the year the vehicle was manufactured. 5. The 11th character: Shows the assembly location, with "0" indicating factory assembly. 6. Characters 12-17: Represent the production serial number, used for vehicle recalls by the manufacturer in case of quality issues.
13
5
Share

Why was the Geely Vision X3 discontinued?

Reasons for the discontinuation of the Geely Vision X3: 1. Prolonged market downturn: Due to the market slump caused by outdated standards, the Vision X3 is gradually being phased out. However, not all models in the Vision series have been discontinued; the Vision X6 is still being retained. 2. The Vision X6 offers great value for money: As a compact SUV, the Vision X6 has gained consumer favor with its affordable pricing, similar to that of small SUVs, and its sales have entered the top 20 in the domestic SUV sales rankings. Additionally, the newly added 1.4T 6AT powertrain has further enhanced its market competitiveness. This is precisely why the Vision X6 has been retained in the market competition for new products. 3. The strong rise of new models: The new model replacing the Vision series, codenamed SS11, is positioned as an entry-level compact sedan or small car. Its competitive advantages will focus on aspects such as cost-performance ratio and size, aiming to capture market share from AO-class sedans.
2
2
Share

Will High Tire Pressure Trigger an Alarm?

The high tire pressure warning light will illuminate, indicating the need for tire inspection and pressure adjustment. According to the international GBT2978-2008 standard, the recommended tire pressures for different types are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates uneven wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends tire cords, reducing elasticity and increasing load during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate, causing internal cracks or blowouts.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.