What is the problem with the difficult starting of Changan Honor engine?

1 Answers
AdrianRose
07/30/25 5:56am
The reasons for the difficult starting of Changan Honor engine are: 1. The mixture is too lean or too rich; 2. Fuel supply system failure or intake system failure; 3. Spark plug or ignition coil failure; 4. Severe carbon deposits in the engine; 5. Engine mount aging or loosening; 6. Insufficient cylinder pressure. The solutions for the difficult starting of Changan Honor engine are: 1. Adjust the mixture concentration; 2. Check the fuel supply system and intake system for faults; 3. Check whether the spark plug or ignition coil is working normally, and replace them in time if there is a problem; 4. Clean the carbon deposits in the engine; 5. Replace the engine mount; 6. Use high-quality fuel.
Was this review help?
8
4
Share
More Forum Discussions

What is the fuel consumption of the Orlando on the highway?

The average fuel consumption of the Orlando is 8.0L/100km, with a range between 6.5L and 9.0L/100km. Fuel consumption is influenced by various objective factors, such as driving conditions, personal driving habits, whether the air conditioning is on, and the vehicle's load. Therefore, there is no precise or standard answer regarding fuel consumption. Here are some fuel-saving tips for driving: 1. Reduce the vehicle's load: Avoid keeping unnecessary items in the car. Not only do they take up space, but they also increase fuel consumption. A heavier vehicle requires the engine to expend more energy to drive, leading to higher fuel consumption. 2. Avoid sudden braking and accelerating: Especially when starting, sudden braking can significantly increase fuel consumption. 3. Maintain the vehicle within the economical speed range: Every car has an economical speed range, typically between 70KM/h and 90KM/h. Within this range, the car consumes the least fuel. Driving too slowly can also increase fuel consumption. 4. Keep tire pressure at the appropriate level: Tire pressure that is too high or too low increases friction and fuel consumption. Additionally, it can lead to unexpected incidents like tire blowouts, posing safety risks.
6
5
Share

What Does the Motorcycle License Subject 1 Test Cover?

The test content includes the most fundamental knowledge such as driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The total test duration is 45 minutes, with the exam paper consisting of 100 questions in the form of true/false and multiple-choice questions. The full score is 100, and a passing score is 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Standards". Subject 1 Test Process: Follow the staff's arrangements to collect your driving training file in order at the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the test area; No loud noise is allowed in the test area; Regulation textbooks are not allowed in the test area (or must be placed in a bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the test area; Candidates who pass the test will sign under the guidance of the staff at the exit and then leave the test area; Candidates who fail the test can leave the test area immediately and wait for the driving school staff to notify them of the retake time.
2
0
Share

What are the principles for vehicle passage at intersections without traffic signals?

When motor vehicles pass through intersections without traffic signal control or traffic police command, they should comply with the following regulations: 1. With traffic signs: When there are traffic signs or markings controlling the intersection, the party with the right of way should proceed first. 2. Without traffic signs: When there are no traffic signs or markings controlling the intersection, stop and look before entering the intersection, and yield to vehicles coming from the right. 3. Direction of travel: Turning motor vehicles should yield to vehicles going straight. 4. Turning direction: Right-turning motor vehicles traveling in opposite directions should yield to left-turning vehicles.
15
2
Share

What is the fuel consumption of the Leiling in urban driving?

The urban fuel consumption of the Leiling is 5L/km. Below is a related introduction to the Leiling: 1. Powertrain: The Leiling is equipped with two engines, one being a 1.2-liter turbocharged engine and the other a 1.8-liter naturally aspirated engine. The 1.8L Atkinson-cycle naturally aspirated engine delivers a maximum power of 99Ps/5200rpm and a peak torque of 142Nm/4000rpm. 2. Other aspects: It features a double-wishbone rear independent suspension, comes standard with 8 airbags, and includes standard electronic parking brake and auto-hold functions.
12
1
Share

Which country produces Haval engines?

Haval engines are produced in China. Haval's models primarily utilize two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine has a maximum power output of 110 kW and a maximum torque of 210 Nm, while the 2.0-liter turbocharged engine delivers a maximum power of 165 kW and a maximum torque of 385 Nm. Haval is an independent brand specializing in the production of SUV models. The brand's best-selling model is the H6, a compact SUV with body dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm.
12
1
Share

What Causes the Clutch to Alternate Between Soft and Hard?

The reason the clutch alternates between soft and hard is due to component issues. Below are specific explanations for the causes of a clutch varying in stiffness: 1. Component abnormalities: Inspect the clutch pedal's return spring, free play, and the clutch assembly for any abnormalities. If faults are found, perform targeted repairs. 2. Component aging: The clutch pedal return spring may age or fail, reducing the pedal's resistance and making the clutch feel softer. If the diaphragm spring fails, it can also lead to a softer clutch pedal, difficulty disengaging the clutch, slipping, and reduced vehicle power.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.